MB151W Bridge Rectifier Single Phase 100V 15A Equivalent & Substitute Parts

Part Overview

The MB151W is a single-phase bridge rectifier manufactured by Diodes Incorporated, rated for 100V peak reverse voltage and 15A average rectified current. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing maintenance, repair, and legacy system support. The MB151W features a through-hole MB-W package configuration suitable for standard PCB assembly applications.

Key Parameters

Parameter	Value
Diode Type	Single Phase
Technology	Standard
Voltage - Peak Reverse (Max)	100 V
Current - Average Rectified (Io)	15 A
Voltage - Forward (Vf) (Max) @ If	1.1 V @ 7.5 A
Current - Reverse Leakage @ Vr	10 µA @ 100 V
Operating Temperature Range	-55°C ~ 150°C (TJ)
Mounting Type	Through Hole
Package / Case	4-Square, MB-W
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the MB151W is determined by the following critical parameters:

Voltage Rating: Peak reverse voltage must be equal to or greater than 100V
Current Rating: Average rectified current must meet or exceed 15A
Diode Type & Technology: Single-phase standard bridge rectifier configuration
Mounting Type: Through-hole package for direct PCB compatibility
Package Form Factor: 4-Square configuration for mechanical fit
Thermal Range: Operating temperature capability must support the application environment
Compliance: RoHS3 compliance and MSL rating for manufacturing and storage requirements

The MB251W-BP qualifies as a substitute based on these parameters. While it features a higher current rating (25A) and different package designation (MB-35W), it maintains electrical compatibility with the MB151W through equivalent voltage ratings, diode type, mounting method, and compliance certifications.

Parameter Comparison

Parameter	MB151W (Diodes Inc.)	MB251W-BP (Micro Commercial Co)	Compatibility Notes
Diode Type	Single Phase	Single Phase	Identical
Technology	Standard	Standard	Identical
Voltage - Peak Reverse (Max)	100 V	100 V	Identical
Current - Average Rectified (Io)	15 A	25 A	Substitute rated higher; suitable for same or lower current applications
Voltage - Forward (Vf) (Max) @ If	1.1 V @ 7.5 A	1.2 V @ 12.5 A	Forward voltage slightly higher at higher current reference point
Current - Reverse Leakage @ Vr	10 µA @ 100 V	10 µA @ 100 V	Identical
Operating Temperature Range	-55°C ~ 150°C (TJ)	-55°C ~ 125°C (TJ)	MB151W has wider upper temperature range
Mounting Type	Through Hole	Through Hole	Identical
Package / Case	4-Square, MB-W	4-Square, MB-35W	Both 4-square form factor; physical dimensions may differ
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	Identical
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	Identical
Product Status	Obsolete	Not For New Designs	Both legacy components; substitute available in higher inventory

Engineering Selection Recommendations

The MB251W-BP serves as a functional substitute for the MB151W based on electrical parameter alignment and compliance certifications. Both components maintain ROHS3 compliance and MSL-1 ratings, ensuring compatibility with standard manufacturing and storage protocols.

Selection of the MB251W-BP is appropriate when:

The application circuit operates at or below 15A average rectified current
Peak reverse voltage requirement does not exceed 100V
Through-hole mounting is required for PCB assembly
Operating temperature range does not exceed 125°C (the lower limit of the substitute)
Higher current capacity provides design margin without electrical incompatibility

The MB151W maintains a superior upper operating temperature limit (150°C vs. 125°C). Applications requiring operation above 125°C should retain the original MB151W specification or identify alternative parts with higher temperature ratings.

Frequently Asked Questions (FAQ)

Q: Can the MB251W-BP directly replace the MB151W in existing circuits?

A: Yes, provided the application operates within the MB251W-BP electrical specifications. The higher current rating (25A vs. 15A) does not create incompatibility for circuits designed for 15A operation. Physical package dimensions must be verified for PCB footprint compatibility, as MB-W and MB-35W designations may indicate different form factors.

Q: What is the significance of the higher current rating on the MB251W-BP?

A: The 25A rating indicates the substitute can handle higher current loads without exceeding thermal or electrical limits. For applications requiring only 15A, this provides operational margin and thermal headroom, potentially improving component longevity.

Q: Are there temperature considerations when substituting?

A: Yes. The MB151W operates to 150°C junction temperature, while the MB251W-BP is rated to 125°C. Applications requiring sustained operation above 125°C must use the original MB151W or identify alternative parts with higher temperature ratings.

Q: What does "Not For New Designs" status mean for the MB251W-BP?

A: This designation indicates the manufacturer does not recommend the part for new product development. However, it remains suitable for maintenance, repair, and legacy system support where the component is already specified.

Q: How do forward voltage differences affect circuit performance?

A: The MB251W-BP exhibits 1.2V forward voltage at 12.5A compared to the MB151W at 1.1V @ 7.5A. At the MB151W's rated 15A, forward voltage characteristics may differ slightly. Circuit designs with tight voltage regulation requirements should account for this variance through simulation or testing.

Q: Are both parts RoHS compliant?

A: Yes. Both the MB151W and MB251W-BP are ROHS3 compliant and carry MSL-1 (unlimited moisture sensitivity) ratings, meeting standard environmental and manufacturing requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message