MAX9692ESE+ Equivalent & Substitute Parts

Part Overview

The MAX9692ESE+ is a single-channel comparator with latch functionality, featuring complementary ECL output architecture. Manufactured by Analog Devices Inc./Maxim Integrated, this linear integrated circuit operates from a 6V single supply and is housed in a 16-SSOP surface mount package. The device is currently in active production status with 1137 pieces available in new original inventory. Alternative part sourcing may be necessary due to supply chain constraints, design redundancy requirements, or regional availability considerations.

Substiute Parts

MAX9692ESE+

Analog Devices Inc./Maxim IntegratedIn Stock: 1216MAX9692ESE+ Datasheet

Current PartRFQ

MAX9692ESE+

Analog Devices Inc./Maxim IntegratedIn Stock: 1216MAX9692ESE+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MAX9692ESE+ is determined by strict equivalence across the following critical parameters:

• Functional Architecture: Single-channel comparator with integrated latch functionality
• Output Configuration: Complementary ECL output topology
• Supply Voltage Compatibility: 6V single supply operation
• Electrical Performance: Input offset voltage, input bias current, output current, quiescent current, CMRR, PSRR, and propagation delay specifications
• Package Compatibility: 16-SSOP surface mount package with 0.154" (3.90mm) width
• Operating Temperature Range: -40°C to 85°C
• Regulatory Compliance: ROHS3 compliance and MSL 1 rating

Only parts meeting all these criteria without deviation qualify as direct substitutes. The MAX9692ESE+ itself represents the only documented equivalent part meeting these exact specifications.

Parameter Comparison

Engineering Selection Recommendations

The MAX9692ESE+ is an active production device with full ROHS3 compliance and MSL 1 rating, indicating unrestricted moisture handling and long-term availability. Selection of this part is appropriate for applications requiring single-supply ECL comparator functionality with integrated latch capability in surface mount form factor. The device's active status and documented inventory support immediate procurement for production applications.

Frequently Asked Questions (FAQ)

Q: What defines a valid substitute for the MAX9692ESE+? A: A valid substitute must match all electrical specifications (supply voltage, input offset, bias current, output current, quiescent current, CMRR, PSRR, propagation delay), functional architecture (single-channel comparator with latch), output type (complementary ECL), package type (16-SSOP), and operating temperature range (-40°C to 85°C).

Q: Can parts with different output types replace the MAX9692ESE+? A: No. The complementary ECL output architecture is fundamental to circuit compatibility. Parts with different output configurations (CMOS, open-drain, or single-ended ECL) are not substitutable.

Q: Is package compatibility limited to 16-SSOP? A: Yes. The 16-SSOP package with 0.154" (3.90mm) width is a critical mechanical and electrical requirement. Different package types or pin counts are not compatible.

Q: What is the significance of the MSL 1 rating? A: MSL 1 indicates unlimited moisture sensitivity level, meaning the device can be stored and handled without time-dependent moisture absorption constraints, supporting flexible supply chain management.

Q: Does ROHS3 compliance affect substitution criteria? A: ROHS3 compliance is a regulatory requirement for the application environment. Substitute parts must maintain equivalent compliance status for regulatory acceptance.