MAX9692EPE Equivalent & Substitute Parts

Part Overview

The MAX9692EPE is a single-channel comparator with integrated latch functionality, featuring complementary ECL outputs. Designed for high-speed signal comparison applications, this 16-DIP through-hole component operates across the industrial temperature range of -40°C to 85°C. The MAX9692EPE is classified as obsolete, making identification of active equivalent parts essential for ongoing production support and design continuity.

Substiute Parts

MAX9692EPE

Analog Devices Inc./Maxim IntegratedIn Stock: 1193MAX9692EPE Datasheet

Current PartRFQ

MAX9692EPE+

Analog Devices Inc./Maxim IntegratedIn Stock: 2904MAX9692EPE+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MAX9692EPE is determined by strict equivalence across the following critical parameters:

• Single-channel comparator architecture with integrated latch function
• Complementary ECL output configuration
• Electrical performance: 6.5mV input offset, 20µA input bias, 50mA output current, 1.8ns propagation delay
• 16-DIP through-hole package (0.300", 7.62mm)
• Industrial temperature range: -40°C to 85°C
• Moisture sensitivity level MSL-1

The MAX9692EPE+ qualifies as a direct substitute based on identical electrical specifications, package geometry, and functional architecture. The primary distinction is product status and compliance certification.

Parameter Comparison

Engineering Selection Recommendations

The MAX9692EPE+ is the direct functional equivalent of the MAX9692EPE. Both parts maintain identical electrical performance and package specifications. Selection between these parts is determined by regulatory and compliance requirements:

For applications requiring RoHS3 compliance, the MAX9692EPE+ is the appropriate selection. This variant is currently in active production status, ensuring long-term availability and supply chain continuity.

For legacy systems or applications without RoHS compliance mandates, the MAX9692EPE remains functionally equivalent, though its obsolete status may impact future procurement.

Frequently Asked Questions (FAQ)

Q: Can the MAX9692EPE+ be used as a direct replacement for the MAX9692EPE?

A: Yes. Both parts are electrically and mechanically identical. The MAX9692EPE+ is the active production variant with ROHS3 compliance certification.

Q: What is the primary difference between these two part numbers?

A: Product status and RoHS compliance. The MAX9692EPE is obsolete and RoHS non-compliant. The MAX9692EPE+ is active production and ROHS3 compliant.

Q: Are the package dimensions identical?

A: Yes. Both parts use 16-DIP (0.300", 7.62mm) through-hole packaging with identical pin configurations and mounting requirements.

Q: What electrical parameters determine substitution eligibility?

A: Input offset voltage (6.5mV), input bias current (20µA), output current (50mA), quiescent current (26mA), CMRR/PSRR performance (80dB/60dB), and propagation delay (1.8ns) must remain constant across substitute parts.

Q: Is the moisture sensitivity level the same?

A: Yes. Both parts are rated MSL-1 (Unlimited), indicating no moisture sensitivity restrictions.