MAX907EPA Equivalent & Substitute Parts

Part Overview

The MAX907EPA is a general-purpose dual comparator IC manufactured by Analog Devices Inc./Maxim Integrated in 8-DIP packaging. This device is classified as obsolete, making identification of equivalent and substitute parts essential for ongoing system support and component procurement. The MAX907EPA operates across a supply voltage range of 4.5V to 11V with TTL output configuration, suitable for general-purpose comparison applications requiring low input offset voltage and moderate propagation delay characteristics.

Substiute Parts

MAX907EPA

Analog Devices Inc./Maxim IntegratedIn Stock: 711MAX907EPA Datasheet

Current PartRFQ

MAX907EPA+

Analog Devices Inc./Maxim IntegratedIn Stock: 3045MAX907EPA+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MAX907EPA is determined by strict equivalence across the following critical parameters:

• Supply voltage range: 4.5V ~ 11V
• Output type: TTL
• Number of comparator elements: 2
• Input offset voltage: 2mV @ 5V maximum
• Input bias current: 0.3µA @ 5V maximum
• Quiescent current: 1mA maximum
• Propagation delay: 50ns maximum
• CMRR and PSRR: 86.02dB typical
• Operating temperature range: -40°C ~ 85°C
• Package configuration: 8-DIP (0.300", 7.62mm)
• Mounting type: Through Hole
• Regulatory compliance: ROHS3 Compliant, REACH Unaffected

The MAX907EPA+ is identified as a direct substitute based on identical electrical specifications and mechanical compatibility. The primary distinction is product status and packaging format.

Parameter Comparison

Engineering Selection Recommendations

The MAX907EPA+ is the direct equivalent substitute for the MAX907EPA. Both devices are manufactured by Analog Devices Inc./Maxim Integrated and maintain identical electrical and mechanical specifications across all critical parameters. The MAX907EPA+ carries active product status, ensuring continued availability and manufacturing support, whereas the MAX907EPA is classified as obsolete. Both devices meet ROHS3 compliance and REACH unaffected status requirements. Selection between these parts should be based on procurement availability and packaging requirements, with the MAX907EPA+ recommended for new designs and ongoing system support due to its active product status.

Frequently Asked Questions (FAQ)

Q: Can the MAX907EPA+ directly replace the MAX907EPA in existing designs?

A: Yes. The MAX907EPA+ is electrically and mechanically equivalent to the MAX907EPA. Both devices feature identical supply voltage ranges (4.5V ~ 11V), TTL output configuration, input offset voltage (2mV @ 5V), propagation delay (50ns), and 8-DIP through-hole packaging. Pin-for-pin compatibility is maintained.

Q: What is the primary difference between MAX907EPA and MAX907EPA+?

A: The MAX907EPA is classified as obsolete, while the MAX907EPA+ maintains active product status. Additionally, the MAX907EPA+ is supplied in tube packaging format, whereas the MAX907EPA uses standard packaging. Electrical performance and mechanical specifications are identical.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both the MAX907EPA and MAX907EPA+ are ROHS3 compliant and REACH unaffected. Moisture sensitivity level is rated at MSL 1 (Unlimited) for both devices.

Q: What packaging options are available for these comparators?

A: Both devices are supplied in 8-DIP (0.300", 7.62mm) through-hole packages. The MAX907EPA+ is available in tube packaging format.

Q: Are these devices suitable for new design implementations?

A: The MAX907EPA+ is recommended for new designs due to its active product status and assured long-term availability. The MAX907EPA, being obsolete, should be replaced with the MAX907EPA+ in new applications.