MAX9013ESA+ Equivalent & Substitute Parts

Part Overview

The MAX9013ESA+ is a single-channel comparator with integrated latch functionality, manufactured by Analog Devices Inc./Maxim Integrated. This device operates as a complementary TTL output comparator in an 8-SOIC surface mount package. The part is currently in active production status with 2,300 units in stock.

Substitute parts become necessary when the MAX9013ESA+ reaches end-of-life, when alternative packaging formats are required for specific PCB layouts, or when design requirements call for general-purpose comparator functionality with compatible electrical characteristics. The Texas Instruments TL3116 series provides functionally equivalent alternatives with comparable performance metrics.

Substiute Parts

MAX9013ESA+

Analog Devices Inc./Maxim IntegratedIn Stock: 2317MAX9013ESA+ Datasheet

Current PartRFQ

MAX9013ESA+

Analog Devices Inc./Maxim IntegratedIn Stock: 2317MAX9013ESA+ Datasheet

DirectRFQ

TL3116CPW

Texas InstrumentsIn Stock: 914TL3116CPW Datasheet

MFR RecommendedRFQ

TL3116CPWR

Texas InstrumentsIn Stock: 1412TL3116CPWR Datasheet

MFR RecommendedRFQ

TL3116ID

Texas InstrumentsIn Stock: 3469TL3116ID Datasheet

MFR RecommendedRFQ

TL3116IDR

Texas InstrumentsIn Stock: 1616TL3116IDR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MAX9013ESA+ is determined by the following critical parameters:

Package Compatibility: The 8-SOIC surface mount package is the primary mechanical constraint. Substitute parts must maintain identical or compatible pinout and footprint dimensions (0.154" width, 3.90mm).

Electrical Performance: Input offset voltage (3mV maximum), input bias current (0.5µA maximum), and output type (complementary TTL) define the functional operating window. Substitute parts must meet or exceed these specifications.

Supply Voltage Range: The 4.5V ~ 5.5V single supply requirement is a critical design parameter. Substitute parts must support this voltage range, though broader supply ranges are acceptable.

Output Current: The 40mA typical output current establishes the load-driving capability. Substitute parts with equal or greater output current capacity are functionally equivalent.

Temperature Range: The -40°C ~ 85°C operating range is a system-level requirement. Substitute parts must support this full temperature span.

Compliance & Certifications: ROHS3 compliance and MSL Level 1 rating ensure environmental and manufacturing compatibility.

The TL3116 series from Texas Instruments meets these substitution criteria across multiple package options, with the TL3116ID and TL3116IDR variants providing direct 8-SOIC package compatibility.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute - TL3116IDR: This part maintains active product status alongside the MAX9013ESA+, ensuring long-term availability and supply chain stability. The 8-SOIC package provides direct mechanical compatibility. Operating temperature range (-40°C ~ 85°C) matches the MAX9013ESA+ specification. ROHS3 compliance and MSL Level 1 rating align with environmental and manufacturing requirements. The broader supply voltage range (5V ~ 10V, ±2.5V ~ 5V) accommodates the 4.5V ~ 5.5V requirement of the original design.

Secondary Substitute - TL3116ID: This variant offers identical electrical and thermal specifications to TL3116IDR with 8-SOIC package compatibility. Product status is obsolete, which may impact long-term procurement availability. Use this part only when TL3116IDR is unavailable and immediate design implementation is required.

Package Alternative - TL3116CPWR: When 8-TSSOP surface mount packaging is acceptable for PCB layout modifications, this part provides active product status with equivalent electrical performance. Operating temperature range is limited to 0°C ~ 70°C, which does not satisfy the -40°C ~ 85°C requirement of the original design. This part is suitable only for applications with reduced temperature operating windows.

Not Recommended - TL3116CPW: Obsolete product status and 8-TSSOP package format make this part unsuitable for new designs or long-term production use.

Frequently Asked Questions (FAQ)

Q: Can TL3116ID and TL3116IDR be used interchangeably with MAX9013ESA+?

A: Both TL3116 variants are mechanically and electrically compatible with the MAX9013ESA+ in 8-SOIC package applications. The TL3116IDR is preferred due to active product status. Verify that the broader supply voltage range (5V ~ 10V, ±2.5V ~ 5V) accommodates your circuit design, as the MAX9013ESA+ operates within the narrower 4.5V ~ 5.5V window.

Q: What is the difference between TL3116ID and TL3116IDR?

A: Both parts share identical electrical specifications and 8-SOIC packaging. TL3116IDR maintains active product status, while TL3116ID is obsolete. For new designs and production quantities, TL3116IDR is the preferred selection.

Q: Why do TL3116 parts show higher quiescent current than MAX9013ESA+?

A: The MAX9013ESA+ specifies 2.3mA maximum quiescent current, while TL3116 variants specify 14.7mA to 15mA. This difference reflects different design architectures and test conditions. Both values remain within acceptable ranges for typical comparator applications. Verify power consumption requirements in your specific circuit design.

Q: Can TL3116CPWR be used if 8-TSSOP packaging is required?

A: TL3116CPWR provides 8-TSSOP package compatibility with equivalent electrical performance. However, the operating temperature range is limited to 0°C ~ 70°C, which does not satisfy the -40°C ~ 85°C specification of the MAX9013ESA+. Use this part only in applications with reduced temperature operating windows.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. MAX9013ESA+, TL3116ID, TL3116IDR, and TL3116CPWR are all ROHS3 compliant with MSL Level 1 rating, ensuring compatibility with modern manufacturing and environmental standards.

Q: What is the impact of the 3ns longer propagation delay in TL3116 parts?

A: TL3116 variants specify 12ns maximum propagation delay compared to 9ns for MAX9013ESA+. This 3ns difference is negligible in most comparator applications. Verify timing-critical circuits against your system clock and signal processing requirements before substitution.