MAX8213BCSE-T Equivalent & Substitute Parts

Part Overview

The MAX8213BCSE-T is a multi-voltage supervisor IC from Analog Devices Inc./Maxim Integrated, designed for power management applications requiring monitoring of five independent voltage channels. This device features open drain or open collector output with active low reset functionality and a reset timeout of less than 1ms minimum. The part is currently classified as obsolete, which necessitates identification of equivalent and substitute components for ongoing design support and procurement.

Substiute Parts

MAX8213BCSE-T

Analog Devices Inc./Maxim IntegratedIn Stock: 1063MAX8213BCSE-T Datasheet

Current PartRFQ

MAX8213BCSE+T

Analog Devices Inc./Maxim IntegratedIn Stock: 1913MAX8213BCSE+T Datasheet

DirectRFQ

MAX8213ACSE+T

Analog Devices Inc./Maxim IntegratedIn Stock: 2041MAX8213ACSE+T Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the MAX8213BCSE-T is determined by strict equivalence across the following critical parameters:

• Multi-voltage supervisor functionality with 5-channel monitoring capability
• 5 adjustable threshold voltages
• Open drain or open collector output configuration
• Active low reset with <1ms minimum reset timeout
• Operating temperature range of 0°C ~ 70°C
• 16-SOIC surface mount package with 0.154" (3.90mm) width
• Base product number MAX8213 series

The identified substitutes maintain full electrical and mechanical compatibility with the original part specification. Differences in product status and compliance certifications are noted separately for procurement and design validation purposes.

Parameter Comparison

Engineering Selection Recommendations

The MAX8213BCSE-T is classified as obsolete and should be replaced with an active product for new designs and ongoing procurement. Both substitute parts maintain identical electrical and mechanical specifications.

MAX8213BCSE+T is the direct substitute, offering active product status with ROHS3 compliance. This part is recommended for applications requiring the same packaging format (bulk or cut tape) as the original specification.

MAX8213ACSE+T is a parametric equivalent with identical functional specifications, supplied in Tape & Reel (TR) packaging format. This part is suitable for high-volume automated assembly processes where tape and reel packaging is preferred.

Both substitutes are ROHS3 compliant, addressing regulatory requirements that the original obsolete part does not meet. Selection between the two substitutes should be based on packaging requirements and procurement logistics rather than electrical performance, as both deliver equivalent functionality.

Frequently Asked Questions (FAQ)

Q: Can MAX8213BCSE+T and MAX8213ACSE+T be used interchangeably with MAX8213BCSE-T?

A: Yes. Both parts are electrically and mechanically equivalent. They maintain identical voltage monitoring channels, threshold adjustability, output configuration, reset characteristics, and operating temperature range. The primary differences are product status (both active versus obsolete) and packaging format (bulk versus tape and reel).

Q: What is the difference between MAX8213BCSE+T and MAX8213ACSE+T?

A: The electrical and functional specifications are identical. The distinction lies in packaging: MAX8213BCSE+T is supplied in standard packaging format, while MAX8213ACSE+T is supplied in Tape & Reel (TR) format. Selection depends on assembly process requirements and procurement preferences.

Q: Are there compliance differences between the substitute parts and the original?

A: Yes. The original MAX8213BCSE-T is RoHS non-compliant. Both substitute parts (MAX8213BCSE+T and MAX8213ACSE+T) are ROHS3 compliant. For applications subject to RoHS regulations, either substitute part is required.

Q: Does the 16-SOIC package remain the same across all three parts?

A: Yes. All three parts use the 16-SOIC package with 0.154" (3.90mm) width. PCB layout and footprint compatibility is maintained across the main part and both substitutes.

Q: What is the significance of the part number suffix (+T versus -T)?

A: The suffix indicates packaging and tape format designation. Both formats contain identical die and electrical specifications. The choice between formats is determined by procurement and assembly process requirements.