MAX792SCSE Equivalent & Substitute Parts

Part Overview

The MAX792SCSE is a supervisor integrated circuit from Analog Devices Inc./Maxim Integrated designed for power management applications. It functions as a simple reset/power-on reset controller with push-pull output configuration, monitoring a single voltage threshold at 2.91V. The device is classified as obsolete, which necessitates identification of functionally equivalent alternatives for new designs and ongoing production requirements. The MAX792SCSE operates across the industrial temperature range of 0°C to 70°C and is packaged in a 16-SOIC surface mount configuration.

Substiute Parts

MAX792SCSE

Analog Devices Inc./Maxim IntegratedIn Stock: 733MAX792SCSE Datasheet

Current PartRFQ

MAX792SCSE+

Analog Devices Inc./Maxim IntegratedIn Stock: 1144MAX792SCSE+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MAX792SCSE is determined by strict equivalence across the following critical parameters:

• Functional Type: Simple Reset/Power-On Reset supervisor with identical monitoring capability
• Voltage Threshold: 2.91V threshold matching
• Output Configuration: Push-Pull output with Active High/Active Low reset capability
• Reset Timeout: 140ms minimum timeout specification
• Package Compatibility: 16-SOIC surface mount package with identical physical dimensions (0.154", 3.90mm Width)
• Operating Temperature Range: 0°C to 70°C industrial range
• Electrical Characteristics: Single voltage monitoring channel

The MAX792SCSE+ qualifies as a direct substitute based on complete parameter alignment across all functional and electrical specifications. The primary distinction is product status and compliance certification.

Parameter Comparison

Engineering Selection Recommendations

The MAX792SCSE+ is the direct equivalent substitute for the MAX792SCSE. Both devices are manufactured by Analog Devices Inc./Maxim Integrated and share identical electrical specifications, functional characteristics, and package configuration.

The MAX792SCSE+ is preferred for new designs and production applications due to its active product status and ROHS3 compliance certification. The original MAX792SCSE is classified as obsolete and carries RoHS non-compliant status, making it unsuitable for applications subject to environmental or regulatory restrictions.

For applications where RoHS compliance is mandatory, the MAX792SCSE+ is the required selection. For legacy systems or applications without compliance requirements, both parts maintain functional equivalence.

Frequently Asked Questions (FAQ)

Q: Can the MAX792SCSE+ be used as a direct replacement for the MAX792SCSE?

A: Yes. The MAX792SCSE+ is a direct functional equivalent. Both devices feature identical voltage threshold (2.91V), output configuration (Push-Pull), reset timeout (140ms minimum), operating temperature range (0°C to 70°C), and 16-SOIC package specifications.

Q: What is the primary difference between these two parts?

A: The MAX792SCSE+ is an active product with ROHS3 compliance certification, while the MAX792SCSE is obsolete and RoHS non-compliant. All electrical and functional parameters are identical.

Q: Are there any package or pinout differences?

A: No. Both parts use the identical 16-SOIC package with 0.154" width and 3.90mm dimensions. Pinout and physical compatibility are complete.

Q: Which part should be selected for new designs?

A: The MAX792SCSE+ should be selected for all new designs. It maintains full functional equivalence while offering active product support and regulatory compliance.

Q: Is the moisture sensitivity level the same for both parts?

A: Yes. Both the MAX792SCSE and MAX792SCSE+ have MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions.