MAX792LCSE+ Equivalent & Substitute Parts

Part Overview

The MAX792LCSE+ is a power management integrated circuit (PMIC) functioning as a supervisor with push-pull output configuration. This device monitors a single voltage channel and provides active high/active low reset functionality with a 140ms minimum reset timeout. The part is currently in active production status with substantial inventory availability (23,511 pcs in stock). Equivalent and substitute parts are identified to support procurement flexibility, supply chain continuity, and design alternatives where electrical and mechanical parameters align with application requirements.

Substiute Parts

MAX792LCSE+

Analog Devices Inc./Maxim IntegratedIn Stock: 23529MAX792LCSE+ Datasheet

Current PartRFQ

MAX792LCSE+

Analog Devices Inc./Maxim IntegratedIn Stock: 23529MAX792LCSE+ Datasheet

DirectRFQ

MAX820LCSE+

Analog Devices Inc./Maxim IntegratedIn Stock: 739MAX820LCSE+ Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MAX792LCSE+ is determined by strict equivalence across the following critical parameters:

• Voltage Monitoring Capability: Single channel monitoring at 4.62V threshold
• Output Type: Push-pull configuration with active high/active low reset capability
• Reset Timing: 140ms minimum reset timeout
• Package Compatibility: 16-SOIC surface mount package (0.154", 3.90mm width)
• Operating Temperature: 0°C to 70°C range
• Regulatory Compliance: ROHS3 compliance and REACH unaffected status

The MAX820LCSE+ meets all these criteria and is classified as a parametric equivalent. Both parts share identical electrical specifications, package geometry, and compliance certifications, making them interchangeable within applications requiring these exact parameters.

Parameter Comparison

Engineering Selection Recommendations

Both MAX792LCSE+ and MAX820LCSE+ are active production parts manufactured by Analog Devices Inc./Maxim Integrated with full ROHS3 compliance and REACH unaffected status. Selection between these parts should be based on inventory availability and procurement lead time requirements. The MAX792LCSE+ offers significantly higher stock levels (23,511 units), while the MAX820LCSE+ maintains lower inventory (711 units). Both parts are suitable for applications requiring single-channel voltage supervision with push-pull output in the 16-SOIC package format. No electrical or mechanical differentiation exists between these parts for the specified parameters.

Frequently Asked Questions (FAQ)

Q: Can MAX820LCSE+ replace MAX792LCSE+ in existing designs? A: Yes. Both parts share identical electrical specifications, including voltage threshold (4.62V), output configuration (push-pull), reset timing (140ms minimum), and package geometry (16-SOIC). No design modifications are required.

Q: Are there any compliance differences between these parts? A: No. Both parts carry identical ROHS3 compliance status, REACH unaffected designation, and moisture sensitivity level (MSL 1 - Unlimited).

Q: What is the primary consideration when choosing between MAX792LCSE+ and MAX820LCSE+? A: Inventory availability and procurement timeline. The MAX792LCSE+ has substantially higher stock levels, while MAX820LCSE+ may require longer lead times due to lower inventory.

Q: Are these parts pin-compatible? A: Yes. Both parts use the 16-SOIC package with identical pin configuration and electrical function.

Q: Do these parts have different operating temperature ranges? A: No. Both parts operate across the identical temperature range of 0°C to 70°C (TA).