MAX712CSE-T Equivalent & Substitute Parts

Part Overview

The MAX712CSE-T is a multi-chemistry battery charger IC manufactured by Analog Devices Inc./Maxim Integrated, designed for charging battery packs with 1 to 16 cells. This 16-SOIC surface mount device operates with a maximum supply voltage of 5.5V and supports constant current charging across multiple battery chemistries. The MAX712CSE-T is classified as obsolete, making identification of active equivalent parts essential for new designs and production continuity.

Substiute Parts

MAX712CSE-T

Analog Devices Inc./Maxim IntegratedIn Stock: 1803MAX712CSE-T Datasheet

Current PartRFQ

MAX712CSE+T

Analog Devices Inc./Maxim IntegratedIn Stock: 1712MAX712CSE+T Datasheet

Parametric EquivalentRFQ

MAX713CSE+T

Analog Devices Inc./Maxim IntegratedIn Stock: 20910MAX713CSE+T Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MAX712CSE-T is determined by strict alignment of the following electrical and mechanical parameters:

• Battery Chemistry: Multi-Chemistry
• Number of Cells: 1 ~ 16
• Current - Charging: Constant
• Voltage - Supply (Max): 5.5V
• Operating Temperature: 0°C ~ 70°C (TA)
• Package / Case: 16-SOIC (0.154", 3.90mm Width)
• Mounting Type: Surface Mount

The substitute parts identified below maintain identical electrical specifications and mechanical compatibility with the main part number. Packaging format differences (Cut Tape vs. Tube) do not affect functional equivalence.

Parameter Comparison

Engineering Selection Recommendations

The MAX712CSE-T is classified as obsolete and carries RoHS non-compliance status. Both substitute parts—MAX712CSE+T and MAX713CSE+T—are active products with ROHS3 compliance certification, making them suitable for new designs and applications requiring regulatory compliance.

MAX712CSE+T maintains the same base product number (MAX712) as the original part and is available in Cut Tape and Digi-Reel packaging formats with 1698 units in stock.

MAX713CSE+T is based on the MAX713 base product number and is available in Cut Tape and Digi-Reel packaging formats with significantly higher inventory availability (20809 units in stock).

Both substitutes share identical electrical specifications, cell count range, charging characteristics, supply voltage limits, operating temperature range, and package geometry. Selection between the two substitutes should be based on inventory availability and design requirements specific to the MAX712 or MAX713 base product families.

Frequently Asked Questions (FAQ)

Q: Can MAX712CSE+T and MAX713CSE+T be used interchangeably with MAX712CSE-T?

A: Both parts maintain electrical and mechanical compatibility with the MAX712CSE-T. They support the same battery chemistry range (multi-chemistry), cell count (1-16), constant current charging, maximum supply voltage (5.5V), operating temperature range (0°C to 70°C), and 16-SOIC package geometry. Functional substitution is valid based on provided parameters.

Q: What is the difference between MAX712CSE+T and MAX713CSE+T?

A: Both parts are parametrically equivalent across all specified electrical and mechanical parameters. The primary difference is the base product number designation (MAX712 vs. MAX713). Selection should be based on design requirements tied to the specific base product family and inventory availability.

Q: Does packaging format affect substitution eligibility?

A: No. The MAX712CSE+T and MAX713CSE+T are available in Cut Tape (CT) and Digi-Reel packaging formats. These packaging differences do not affect electrical performance or mechanical compatibility. The 16-SOIC package geometry remains constant across all variants.

Q: Why is the original MAX712CSE-T obsolete?

A: The MAX712CSE-T is classified as obsolete by the manufacturer. Active equivalent parts (MAX712CSE+T and MAX713CSE+T) are available as direct replacements for new designs and production applications.

Q: Are there compliance differences between the original and substitute parts?

A: Yes. The MAX712CSE-T is RoHS non-compliant, while both MAX712CSE+T and MAX713CSE+T are ROHS3 compliant. Both substitute parts maintain REACH Unaffected status and EAR99 export classification, matching the original part's regulatory profile in these categories.