MAX6301CSA Equivalent & Substitute Parts

Part Overview

The MAX6301CSA is a supervisor integrated circuit designed for power management applications, specifically functioning as a simple reset or power-on reset controller. This component monitors a single voltage channel and provides active-low reset output through an open-drain or open-collector configuration. The MAX6301CSA is classified as obsolete, which necessitates identification of equivalent substitute parts for ongoing design support and procurement continuity. Active alternatives within the same product family maintain identical electrical and mechanical specifications while offering improved availability and compliance status.

Key Parameters

Parameter	Specification
Manufacturer	Analog Devices Inc./Maxim Integrated
Category	Power Management (PMIC)
Type	Simple Reset/Power-On Reset
Number of Voltages Monitored	1
Voltage Threshold	Adjustable/Selectable
Output Configuration	Open Drain or Open Collector
Reset Logic	Active Low
Reset Timeout	2.8ms Minimum
Operating Temperature Range	0°C to 70°C (TA)
Mounting Type	Surface Mount
Package	8-SOIC (0.154", 3.90mm Width)
Base Product Number	MAX6301

Substitute Part Grouping Explanation

Substitution of the MAX6301CSA is determined by strict equivalence across the following critical parameters:

Functional Type: Simple Reset/Power-On Reset supervisor with single-channel voltage monitoring
Electrical Characteristics: Adjustable/selectable voltage threshold, active-low reset output, open-drain or open-collector configuration, 2.8ms minimum reset timeout
Operating Conditions: 0°C to 70°C temperature range
Physical Form Factor: 8-SOIC surface-mount package with 0.154" (3.90mm) width
Manufacturer Consistency: Analog Devices Inc./Maxim Integrated product family

The substitute parts MAX6301CSA+ and MAX6301CSA+CL0 maintain complete parametric equivalence with the original MAX6301CSA across all specified electrical and mechanical dimensions. Differences exist only in product status, packaging format, and regulatory compliance certifications.

Parameter Comparison

Parameter	MAX6301CSA (Main)	MAX6301CSA+ (Direct Substitute)	MAX6301CSA+CL0 (Parametric Equivalent)
Manufacturer	Analog Devices Inc./Maxim Integrated	Analog Devices Inc./Maxim Integrated	Analog Devices Inc./Maxim Integrated
Product Status	Obsolete	Active	Active
Type	Simple Reset/Power-On Reset	Simple Reset/Power-On Reset	Simple Reset/Power-On Reset
Number of Voltages Monitored	1	1	1
Voltage Threshold	Adjustable/Selectable	Adjustable/Selectable	Adjustable/Selectable
Output Configuration	Open Drain or Open Collector	Open Drain or Open Collector	Open Drain or Open Collector
Reset Logic	Active Low	Active Low	Active Low
Reset Timeout	2.8ms Minimum	2.8ms Minimum	2.8ms Minimum
Operating Temperature	0°C to 70°C (TA)	0°C to 70°C (TA)	0°C to 70°C (TA)
Mounting Type	Surface Mount	Surface Mount	Surface Mount
Package / Case	8-SOIC (0.154", 3.90mm Width)	8-SOIC (0.154", 3.90mm Width)	8-SOIC (0.154", 3.90mm Width)
Base Product Number	MAX6301	MAX6301	MAX6301
RoHS Status	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected

Engineering Selection Recommendations

For New Designs and Procurement: MAX6301CSA+ is the preferred substitute. This part maintains active product status with ROHS3 compliance certification, ensuring long-term availability and regulatory alignment with current manufacturing standards. The tube packaging format provides standard handling and storage compatibility.

For Parametric Equivalence: MAX6301CSA+CL0 provides identical electrical and mechanical performance with equivalent ROHS3 compliance status. Selection between MAX6301CSA+ and MAX6301CSA+CL0 depends on packaging format requirements and supplier availability.

Compliance Consideration: Both substitute parts achieve ROHS3 compliance, whereas the original MAX6301CSA is RoHS non-compliant. This distinction is material for applications subject to regulatory compliance requirements.

Frequently Asked Questions (FAQ)

Q: Can MAX6301CSA+ directly replace MAX6301CSA in existing designs?

A: Yes. MAX6301CSA+ maintains complete electrical and mechanical equivalence across all specified parameters, including voltage monitoring, reset timing, output configuration, and package form factor. Direct substitution is supported without circuit modification.

Q: What is the difference between MAX6301CSA+ and MAX6301CSA+CL0?

A: Both parts are parametrically equivalent with identical electrical specifications and package dimensions. The primary differences are product status (both active), packaging format designation, and supplier inventory. Selection depends on packaging requirements and availability.

Q: Why is the original MAX6301CSA classified as obsolete?

A: The MAX6301CSA is listed as obsolete by the manufacturer. Active alternatives MAX6301CSA+ and MAX6301CSA+CL0 provide continued access to this supervisor functionality with improved compliance status.

Q: Are there any temperature range limitations when substituting?

A: No. All three parts operate across the identical temperature range of 0°C to 70°C (TA). Temperature performance is equivalent across the substitution group.

Q: Does the 8-SOIC package remain consistent across all variants?

A: Yes. All parts use the 8-SOIC surface-mount package with 0.154" (3.90mm) width. PCB layout and footprint compatibility is maintained across MAX6301CSA, MAX6301CSA+, and MAX6301CSA+CL0.

Q: What is the significance of ROHS3 compliance on the substitute parts?

A: ROHS3 compliance on MAX6301CSA+ and MAX6301CSA+CL0 indicates conformance to current Restriction of Hazardous Substances regulations. The original MAX6301CSA is RoHS non-compliant. For applications requiring regulatory compliance documentation, the substitute parts are the appropriate selection.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message