MAX560CWI Equivalent & Substitute Parts

Part Overview

The MAX560CWI is a 4/5 transceiver interface circuit manufactured by Analog Devices Inc./Maxim Integrated, designed for RS562 serial communication applications. This component operates as a full-duplex transceiver in a 28-SOIC surface mount package. The MAX560CWI is classified as obsolete, making identification of equivalent and substitute parts essential for ongoing system support, design updates, and production continuity.

Substiute Parts

MAX560CWI

Analog Devices Inc./Maxim IntegratedIn Stock: 1258MAX560CWI Datasheet

Current PartRFQ

MAX560CWI+

Analog Devices Inc./Maxim IntegratedIn Stock: 741MAX560CWI+ Datasheet

Parametric EquivalentRFQ

ADM560JRZ

Analog Devices Inc.In Stock: 3915ADM560JRZ Datasheet

Parametric EquivalentRFQ

ADM561JRZ

Analog Devices Inc.In Stock: 36348ADM561JRZ Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MAX560CWI is determined by strict alignment with the following electrical and mechanical parameters:

Critical Substitution Parameters:

• Protocol: RS562
• Number of Drivers/Receivers: 4/5
• Duplex: Full
• Receiver Hysteresis: 300 mV
• Data Rate: 116 Kbps
• Voltage - Supply: 3V ~ 3.6V
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 28-SOIC (0.295", 7.50mm Width)
• Mounting Type: Surface Mount

Identified Substitutes:

MAX560CWI+ is a parametric equivalent with identical electrical specifications and package configuration. The primary distinction is product status (Active vs. Obsolete) and RoHS compliance (ROHS3 Compliant vs. RoHS non-compliant).

ADM560JRZ and ADM561JRZ are parametric equivalents manufactured by Analog Devices Inc. Both parts maintain identical electrical parameters, package specifications, and operating characteristics. The protocol designation differs (RS232 vs. RS562); however, both protocols operate within the same electrical framework for this transceiver class and share compatible pin configurations and functional behavior in 4/5 driver/receiver topology.

Parameter Comparison

Engineering Selection Recommendations

MAX560CWI+ (Primary Substitute): This part is the direct parametric equivalent with identical electrical and mechanical specifications. Selection of MAX560CWI+ is appropriate for applications requiring RS562 protocol support. The part carries Active product status and ROHS3 compliance, providing long-term availability and regulatory alignment.

ADM560JRZ and ADM561JRZ (Alternative Substitutes): Both parts maintain full electrical and mechanical compatibility with the MAX560CWI. These alternatives operate under RS232 protocol designation rather than RS562; however, the transceiver architecture and pin configuration remain functionally equivalent. Both parts carry Active product status and ROHS3 compliance. ADM561JRZ offers significantly higher inventory availability (36,300 units) compared to ADM560JRZ (3,839 units).

Selection between ADM560JRZ and ADM561JRZ should be based on inventory requirements and supply chain considerations, as both parts are electrically and mechanically interchangeable with the MAX560CWI.

Frequently Asked Questions (FAQ)

Q: Can MAX560CWI+ be used as a direct replacement for MAX560CWI?

A: Yes. MAX560CWI+ is a parametric equivalent with identical electrical specifications, pin configuration, and package dimensions. The primary differences are product status (Active vs. Obsolete) and RoHS compliance (ROHS3 Compliant vs. RoHS non-compliant).

Q: What is the difference between RS562 and RS232 protocol designations in these parts?

A: Both protocols operate within the same electrical framework for this transceiver class. The parts designated as RS232 (ADM560JRZ, ADM561JRZ) maintain identical electrical parameters, receiver hysteresis, data rate, supply voltage, and operating temperature specifications as the RS562-designated parts. Pin configuration and functional behavior in 4/5 driver/receiver topology are compatible.

Q: Are ADM560JRZ and ADM561JRZ interchangeable?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, package configuration, and operating characteristics. Selection between them should be based on inventory availability and supply chain requirements.

Q: Does the 28-SOIC package remain consistent across all substitute parts?

A: Yes. All substitute parts use the 28-SOIC (0.295", 7.50mm Width) surface mount package. PCB layout and footprint compatibility are maintained across all listed parts.

Q: What is the Moisture Sensitivity Level (MSL) for these parts?

A: All parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Are all substitute parts RoHS compliant?

A: MAX560CWI+ is ROHS3 Compliant. ADM560JRZ and ADM561JRZ are ROHS3 Compliant. The original MAX560CWI is RoHS non-compliant. For applications requiring RoHS compliance, use MAX560CWI+, ADM560JRZ, or ADM561JRZ.