MAX5104EEE 12-Bit Digital to Analog Converter Equivalent & Substitute Parts

Part Overview

The MAX5104EEE is a 12-bit digital to analog converter (DAC) manufactured by Analog Devices Inc./Maxim Integrated, designed for data acquisition applications requiring dual voltage-output conversion. This component features SPI interface compatibility, external reference capability, and buffered output configuration suitable for industrial and embedded systems.

The MAX5104EEE is classified as obsolete, which necessitates identification of functionally equivalent alternatives for ongoing design support and procurement. Locating suitable substitute parts ensures design continuity and system reliability for applications currently utilizing this component.

Substiute Parts

MAX5104EEE

Analog Devices Inc./Maxim IntegratedIn Stock: 2930MAX5104EEE Datasheet

Current PartRFQ

MAX5104EEE+

Analog Devices Inc./Maxim IntegratedIn Stock: 988MAX5104EEE+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MAX5104EEE is determined by strict alignment across the following critical parameters:

• Resolution: 12-bit conversion capability
• Channel Count: Dual D/A converter configuration
• Output Configuration: Voltage-buffered output topology
• Interface Protocol: SPI serial communication
• Supply Voltage: 5V analog and digital supply rails
• Package Form Factor: 16-SSOP surface mount package
• Thermal Range: -40°C to 85°C operating specification
• Linearity Performance: INL/DNL specifications within ±4 LSB (Max) and ±1 LSB (Max)

The MAX5104EEE+ qualifies as a direct substitute based on identical electrical specifications, package geometry, and functional architecture. The primary distinction is product status and compliance certification.

Parameter Comparison

Engineering Selection Recommendations

The MAX5104EEE+ is the direct functional equivalent for MAX5104EEE applications. Selection between these parts should be based on the following criteria:

For new designs or redesigns: MAX5104EEE+ is the appropriate choice due to active product status and ROHS3 compliance certification. This part ensures long-term availability and regulatory alignment with current environmental standards.

For legacy system maintenance: MAX5104EEE remains electrically and mechanically compatible with existing designs. However, procurement of this obsolete part may face extended lead times and limited inventory availability.

Both parts share identical electrical performance, pinout configuration, and package dimensions, enabling direct substitution without circuit modification or PCB redesign.

Frequently Asked Questions (FAQ)

Q: Can MAX5104EEE+ replace MAX5104EEE in existing designs?

A: Yes. The MAX5104EEE+ is a direct substitute with identical electrical specifications, pinout, and package form factor. No circuit modifications are required.

Q: What is the primary difference between MAX5104EEE and MAX5104EEE+?

A: The MAX5104EEE+ is an active product with ROHS3 compliance certification, while the MAX5104EEE is obsolete and RoHS non-compliant. Electrical and functional performance are identical.

Q: Are there any package or mounting differences?

A: No. Both parts use the 16-SSOP surface mount package with identical 0.154" (3.90mm) width specification. PCB footprints are interchangeable.

Q: What supply voltage is required for operation?

A: Both parts require 5V for analog and digital supply rails. Dual supply configuration is not supported.

Q: Is the SPI interface protocol identical between both parts?

A: Yes. Both MAX5104EEE and MAX5104EEE+ use identical SPI serial communication protocol and timing specifications.

Q: What is the settling time specification?

A: Both parts specify 15µs typical settling time for voltage output stabilization.

Q: Are there compliance or certification differences?

A: Yes. MAX5104EEE+ is ROHS3 compliant and REACH unaffected. MAX5104EEE is RoHS non-compliant. Both are EAR99 classified and REACH unaffected.