MAX506AEPP+ Equivalent & Substitute Parts

Part Overview

The MAX506AEPP+ is an 8-bit quad digital-to-analog converter (DAC) manufactured by Analog Devices Inc./Maxim Integrated. This component features R-2R architecture with buffered voltage output and parallel data interface, designed for data acquisition applications requiring multiple simultaneous analog outputs. The part is currently in active production status with 3400 units available in stock. Alternative models may be required due to supply constraints, design phase transitions, or specific application requirements within compatible electrical and mechanical parameters.

Substiute Parts

MAX506AEPP+

Analog Devices Inc./Maxim IntegratedIn Stock: 3440MAX506AEPP+ Datasheet

Current PartRFQ

MAX506BEPP+

Analog Devices Inc./Maxim IntegratedIn Stock: 3209MAX506BEPP+ Datasheet

Parametric EquivalentRFQ

MAX506AEPP+

Analog Devices Inc./Maxim IntegratedIn Stock: 3440MAX506AEPP+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MAX506AEPP+ is determined by the following critical parameters:

• Resolution & Channel Count: 8-bit resolution with 4 independent D/A converters
• Output Configuration: Buffered voltage output with R-2R architecture
• Interface Type: Parallel data interface
• Package Compatibility: 20-DIP through-hole package (0.300", 7.62mm)
• Supply Voltage Requirements: ±5V analog supply, 5V digital supply
• Compliance Standards: ROHS3 compliance, REACH unaffected status, EAR99 classification

The MAX506BEPP+ qualifies as a parametric equivalent based on matching all core electrical specifications and identical package configuration. Both parts share the same base product number (MAX506) and maintain compatibility across all specified electrical and mechanical parameters.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: MAX506AEPP+ is the recommended choice for new designs and ongoing production. This part maintains active product status with established supply availability (3400 units in stock) and represents the current manufacturing standard from Analog Devices Inc./Maxim Integrated.

Substitute Selection: MAX506BEPP+ is electrically and mechanically compatible with MAX506AEPP+ and may be selected when MAX506AEPP+ availability is constrained. Both parts meet ROHS3 compliance requirements and carry identical operating temperature specifications. The MAX506BEPP+ is classified as obsolete; therefore, its use should be limited to applications where existing inventory must be utilized or where supply chain continuity requires temporary substitution.

Compliance Considerations: Both parts maintain ROHS3 compliance, REACH unaffected status, and EAR99 export classification. No additional regulatory review is required when substituting between these parts.

Frequently Asked Questions (FAQ)

Q: Can MAX506BEPP+ be used as a direct replacement for MAX506AEPP+ in existing designs?

A: Yes. Both parts share identical electrical specifications (8-bit resolution, 4 D/A converters, R-2R architecture, buffered voltage output, parallel interface), matching supply voltage requirements (±5V analog, 5V digital), and identical 20-DIP package configuration. Pin-for-pin compatibility is maintained across all functional parameters.

Q: What is the primary difference between MAX506AEPP+ and MAX506BEPP+?

A: The primary difference is product status. MAX506AEPP+ is active production, while MAX506BEPP+ is obsolete. Both parts are electrically and mechanically equivalent. The MAX506BEPP+ includes specified settling time (6µs typical) and INL/DNL performance (±1 LSB maximum), which are not specified for MAX506AEPP+ in the provided data.

Q: Are there any package or mounting differences between these parts?

A: No. Both parts use identical 20-DIP (0.300", 7.62mm) through-hole packages with matching pin configurations and mechanical dimensions.

Q: What supply voltage requirements must be met for either part?

A: Both MAX506AEPP+ and MAX506BEPP+ require ±5V analog supply voltage and 5V digital supply voltage. Circuit designs must provide these dual supply rails for proper operation.

Q: Are there temperature range limitations for substitution?

A: No. Both parts operate across the identical temperature range of -40°C to 85°C, ensuring thermal compatibility in equivalent operating environments.

Q: Do both parts meet current compliance standards?

A: Yes. Both MAX506AEPP+ and MAX506BEPP+ are ROHS3 compliant, REACH unaffected, and classified as EAR99 for export purposes. No additional compliance verification is required when substituting between these parts.