Request Quote
(Ships tomorrow)
MAX4713EUE+ Equivalent & Substitute Parts
Part Overview
The MAX4713EUE+ is a 4-circuit SPST (Single-Pole Single-Throw) NO/NC analog switch IC manufactured by Analog Devices Inc./Maxim Integrated. This device operates as a 1:1 multiplexer/demultiplexer with 25Ohm on-state resistance and is housed in a 16-TSSOP surface mount package. The part is active and in production, with 801 units currently in stock. Substitute parts are identified when design requirements necessitate different electrical characteristics such as on-state resistance, supply voltage ranges, bandwidth, or operating temperature specifications while maintaining the same package form factor and basic switch topology.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Manufacturer Part Number | MAX4713EUE+ |
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Switch Circuit Type | SPST - NO/NC |
| Number of Circuits | 4 |
| Multiplexer/Demultiplexer Configuration | 1:1 |
| On-State Resistance (Max) | 25Ohm |
| Channel-to-Channel Matching (ΔRon) | 200mOhm |
| Voltage - Supply, Single (V+) | 2.7V ~ 11V |
| Voltage - Supply, Dual (V±) | ±2.7V ~ 5.5V |
| Switch Time (Ton, Toff) (Max) | 125ns, 80ns |
| Charge Injection | 25pC |
| Channel Capacitance (CS(off), CD(off)) | 8pF, 8pF |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Crosstalk | -87dB @ 1MHz |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Package / Case | 16-TSSOP (0.173", 4.40mm Width) |
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Product Status | Active |
Substitute Part Grouping Explanation
Substitution of the MAX4713EUE+ is determined by the following critical parameters:
Electrical Compatibility Criteria:
- Switch circuit topology (SPST - NO/NC)
- Number of circuits (4)
- Multiplexer/demultiplexer configuration (1:1)
- Package form factor (16-TSSOP)
- Surface mount mounting type
Application-Dependent Selection Criteria:
- On-state resistance range and matching tolerance
- Supply voltage requirements (single or dual rail)
- Switch timing characteristics (Ton, Toff)
- Charge injection and capacitance specifications
- Operating temperature range
- Leakage current and crosstalk performance
The substitute parts listed below maintain identical package and circuit topology but offer alternative electrical performance characteristics. Selection depends on specific circuit requirements for impedance, voltage rails, speed, and temperature operation.
Parameter Comparison
| Parameter | MAX4713EUE+ | ADG1213YRUZ | ADG1313YRUZ | ADG1413YRUZ | ADG1613BRUZ |
|---|---|---|---|---|---|
| On-State Resistance (Max) | 25Ohm | 190Ohm | 200Ohm | 1.8Ohm | 1.1Ohm |
| Channel-to-Channel Matching (ΔRon) | 200mOhm | 2.5Ohm | 5Ohm | 100mOhm | 30mOhm |
| Voltage - Supply, Single (V+) | 2.7V ~ 11V | 5V ~ 16.5V | 12V | 5V ~ 16.5V | 3.3V ~ 16V |
| Voltage - Supply, Dual (V±) | ±2.7V ~ 5.5V | ±4.5V ~ 16.5V | ±15V | ±4.5V ~ 16.5V | ±3.3V ~ 8V |
| Switch Time Ton (Max) | 125ns | 130ns | 125ns | 150ns | 156ns |
| Switch Time Toff (Max) | 80ns | 115ns | 50ns | 120ns | 87ns |
| -3dB Bandwidth | — | 1GHz | 600MHz | 170MHz | 38MHz |
| Charge Injection | 25pC | -0.3pC | 2pC | -20pC | 170pC |
| Channel Capacitance (CS(off), CD(off)) | 8pF, 8pF | 1.1pF, 1.2pF | 5pF, 5pF | 23pF, 23pF | 60pF, 60pF |
| Current - Leakage (IS(off)) (Max) | 500pA | 100pA | 10nA | 550pA | 300pA |
| Crosstalk | -87dB @ 1MHz | -90dB @ 1MHz | -90dB @ 1MHz | -100dB @ 1MHz | -110dB @ 1MHz |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 125°C | -40°C ~ 105°C | -40°C ~ 125°C | -40°C ~ 125°C |
| Package / Case | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP |
| RoHS Status | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant |
| Product Status | Active | Active | Active | Active | Active |
Engineering Selection Recommendations
All listed substitute parts maintain active product status and ROHS3 compliance, ensuring long-term availability and regulatory alignment with the MAX4713EUE+.
ADG1213YRUZ / ADG1213YRUZ-REEL7: Select when higher on-state resistance (190Ohm) is acceptable and extended supply voltage range (5V ~ 16.5V single, ±4.5V ~ 16.5V dual) is required. Offers superior bandwidth (1GHz) and lower charge injection (-0.3pC). Extended operating temperature to 125°C. Available in both tube and cut tape/reel packaging.
ADG1313YRUZ / ADG1313YRUZ-REEL7: Select for fixed 12V single supply or ±15V dual supply applications. On-state resistance of 200Ohm with 600MHz bandwidth. Fastest Toff specification (50ns). Operating temperature range to 105°C. Available in tube and tape/reel formats.
ADG1413YRUZ / ADG1413YRUZ-REEL7: Select for low on-state resistance requirement (1.8Ohm) with extended supply voltage range (5V ~ 16.5V single, ±4.5V ~ 16.5V dual). Excellent crosstalk performance (-100dB @ 1MHz). Extended operating temperature to 125°C. Available in tube and cut tape/reel packaging.
ADG1613BRUZ / ADG1613BRUZ-REEL / ADG1613BRUZ-REEL7: Select for lowest on-state resistance (1.1Ohm) with widest supply voltage compatibility (3.3V ~ 16V single, ±3.3V ~ 8V dual). Superior crosstalk isolation (-110dB @ 1MHz) and lowest channel-to-channel matching error (30mOhm). Extended operating temperature to 125°C. Available in tube, tape/reel, and cut tape/reel packaging options.
Frequently Asked Questions (FAQ)
Q: Can ADG1213YRUZ directly replace MAX4713EUE+ in all applications?
A: Direct replacement is possible only if the circuit tolerates higher on-state resistance (190Ohm vs. 25Ohm) and the supply voltage range (5V ~ 16.5V minimum) matches system requirements. The MAX4713EUE+ operates from 2.7V, while ADG1213YRUZ requires minimum 5V. Verify supply voltage compatibility before substitution.
Q: What is the primary difference between ADG1413YRUZ and ADG1613BRUZ?
A: ADG1613BRUZ offers lower on-state resistance (1.1Ohm vs. 1.8Ohm), superior crosstalk performance (-110dB vs. -100dB @ 1MHz), and tighter channel-to-channel matching (30mOhm vs. 100mOhm). ADG1413YRUZ provides higher bandwidth (170MHz vs. 38MHz) and lower charge injection (-20pC vs. 170pC). Selection depends on whether impedance matching or bandwidth performance is critical.
Q: Are packaging variants (tube, cut tape, reel) electrically equivalent?
A: Yes. Tube, cut tape (CT), and Digi-Reel packaging variants of the same base part number (e.g., ADG1213YRUZ, ADG1213YRUZ-REEL7) contain identical die and electrical specifications. Packaging differences affect only handling, storage, and assembly processes. Select based on manufacturing equipment compatibility and supply chain requirements.
Q: Which substitute offers the closest electrical match to MAX4713EUE+?
A: ADG1413YRUZ provides the closest match in switch timing (150ns Ton vs. 125ns, 120ns Toff vs. 80ns) and maintains similar charge injection characteristics. However, on-state resistance differs significantly (1.8Ohm vs. 25Ohm). For applications sensitive to impedance, no perfect substitute exists; circuit redesign may be necessary.
Q: Can I use ADG1313YRUZ in a dual-supply ±5V system?
A: No. ADG1313YRUZ requires fixed ±15V dual supply operation. It is not compatible with ±5V systems. Use ADG1213YRUZ (±4.5V ~ 16.5V) or ADG1613BRUZ (±3.3V ~ 8V) for lower voltage dual-supply applications.
Q: What is the significance of the -REEL7 suffix?
A: The -REEL7 suffix indicates cut tape and Digi-Reel packaging format, typically used for high-volume automated assembly. The base part number (e.g., ADG1213YRUZ) indicates tube packaging. Electrical specifications are identical; the suffix reflects packaging and delivery format only.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts