MAX4613ESE Equivalent & Substitute Parts

Part Overview

The MAX4613ESE is a 4-circuit SPST (Single-Pole Single-Throw) analog switch IC manufactured by Analog Devices Inc./Maxim Integrated, housed in a 16-SOIC surface mount package. This component features 70Ohm on-state resistance and operates across single supply (4.5V to 40V) or dual supply (±4.5V to ±20V) configurations. The part is classified as obsolete, necessitating identification of functionally equivalent alternatives for new designs and ongoing production requirements.

Key Parameters

Parameter	Value
Switch Circuit Type	SPST - NO/NC
Number of Circuits	4
Multiplexer/Demultiplexer Circuit	1:1
On-State Resistance (Max)	70Ohm
Channel-to-Channel Matching (ΔRon)	4Ohm (Max)
Voltage - Supply, Single (V+)	4.5V ~ 40V
Voltage - Supply, Dual (V±)	±4.5V ~ 20V
Switch Time (Ton, Toff) (Max)	250ns, 120ns
Charge Injection	5pC
Channel Capacitance (CS(off), CD(off))	4pF, 4pF
Current - Leakage (IS(off)) (Max)	500pA
Crosstalk	-100dB @ 1MHz
Operating Temperature	-40°C ~ 85°C (TA)
Package / Case	16-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
RoHS Status	RoHS non-compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the MAX4613ESE is determined by strict adherence to the following electrical and mechanical parameters:

Critical Compatibility Parameters:

Switch circuit configuration: SPST - NO/NC
Circuit count: 4 circuits
Multiplexer/Demultiplexer ratio: 1:1
Package type: 16-SOIC surface mount
Operating temperature range: -40°C ~ 85°C (TA)

Electrical Performance Parameters:

On-state resistance must not exceed 70Ohm
Supply voltage ranges must encompass or match the original specification
Leakage current specification must be met or improved

Substitute parts are grouped into two categories based on on-state resistance performance:

Category A - Lower Resistance Substitutes (35Ohm): DG413DY-E3, DG413DY-T1-E3, DG413DYZ, DG413DYZ-T. These parts offer improved on-state resistance performance while maintaining all other critical parameters.

Category B - Intermediate Resistance Substitute (60Ohm): DG213DY-E3, DG213DY-T1-E3. These parts provide reduced on-state resistance compared to the original while maintaining functional compatibility.

Direct Equivalent: MAX4613ESE+ represents the active production equivalent with identical electrical specifications and improved RoHS compliance status.

Parameter Comparison

Parameter	MAX4613ESE	MAX4613ESE+	DG213DY-E3	DG213DY-T1-E3	DG413DY-E3	DG413DY-T1-E3	DG413DYZ	DG413DYZ-T
Manufacturer	Analog Devices Inc./Maxim Integrated	Analog Devices Inc./Maxim Integrated	Vishay Siliconix	Vishay Siliconix	Vishay Siliconix	Vishay Siliconix	Renesas Electronics Corporation	Renesas Electronics Corporation
Switch Circuit	SPST - NO/NC	SPST - NO/NC	SPST - NO/NC	SPST - NO/NC	SPST - NO/NC	SPST - NO/NC	SPST - NO/NC	SPST - NO/NC
Number of Circuits	4	4	4	4	4	4	4	4
On-State Resistance (Max)	70Ohm	70Ohm	60Ohm	60Ohm	35Ohm	35Ohm	35Ohm	35Ohm
Voltage - Supply, Single (V+)	4.5V ~ 40V	4.5V ~ 40V	13V ~ 36V	13V ~ 36V	5V ~ 44V	5V ~ 44V	5V ~ 44V	5V ~ 44V
Voltage - Supply, Dual (V±)	±4.5V ~ 20V	±4.5V ~ 20V	±7V ~ 22V	±7V ~ 22V	±5V ~ 20V	±5V ~ 20V	±5V ~ 20V	±5V ~ 20V
Switch Time (Ton, Toff) (Max)	250ns, 120ns	250ns, 120ns	130ns, 100ns	130ns, 100ns	175ns, 145ns	175ns, 145ns	175ns, 145ns	175ns, 145ns
Charge Injection	5pC	5pC	1pC	1pC	5pC	5pC	5pC	5pC
Channel Capacitance (CS(off), CD(off))	4pF, 4pF	4pF, 4pF	5pF, 5pF	5pF, 5pF	9pF, 9pF	9pF, 9pF	9pF, 9pF	9pF, 9pF
Current - Leakage (IS(off)) (Max)	500pA	500pA	500pA	500pA	250pA	250pA	100pA	100pA
Crosstalk	-100dB @ 1MHz	-100dB @ 1MHz	-95dB @ 100kHz	-95dB @ 100kHz	-85dB @ 1MHz	-85dB @ 1MHz	-85dB @ 1MHz	-85dB @ 1MHz
Operating Temperature	-40°C ~ 85°C (TA)	-40°C ~ 85°C (TA)	-40°C ~ 85°C (TA)	-40°C ~ 85°C (TA)	-40°C ~ 85°C (TA)	-40°C ~ 85°C (TA)	-40°C ~ 85°C (TA)	-40°C ~ 85°C (TA)
Package / Case	16-SOIC (0.154", 3.90mm Width)	16-SOIC (0.154", 3.90mm Width)	16-SOIC (0.154", 3.90mm Width)	16-SOIC (0.154", 3.90mm Width)	16-SOIC (0.154", 3.90mm Width)	16-SOIC (0.154", 3.90mm Width)	16-SOIC (0.154", 3.90mm Width)	16-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
RoHS Status	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	3 (168 Hours)	3 (168 Hours)
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

For Direct Replacement (Identical Specifications): MAX4613ESE+ is the active production equivalent with identical electrical performance to the original MAX4613ESE. This part is ROHS3 compliant and maintains all original specifications including 70Ohm on-state resistance, supply voltage ranges, and switching characteristics. Selection of MAX4613ESE+ is appropriate for designs requiring no performance modification.

For Improved Performance with Lower On-State Resistance: DG413DY-E3, DG413DY-T1-E3, DG413DYZ, and DG413DYZ-T offer 35Ohm on-state resistance, representing a 50% reduction compared to the original specification. All four parts maintain the required 4-circuit SPST configuration, 16-SOIC package, and -40°C to 85°C operating temperature range. These parts are ROHS3 compliant. DG413DYZ and DG413DYZ-T carry MSL-3 rating (168 hours) versus MSL-1 for other alternatives. The DG413 series exhibits lower leakage current (100-250pA) and improved crosstalk performance (-85dB @ 1MHz).

For Intermediate Performance: DG213DY-E3 and DG213DY-T1-E3 provide 60Ohm on-state resistance with improved charge injection (1pC versus 5pC) and faster switching times (130ns/100ns versus 250ns/120ns). These parts are ROHS3 compliant with MSL-1 rating. Supply voltage range for single supply is 13V to 36V, which does not encompass the lower 4.5V specification of the original part.

Compliance Considerations: All substitute parts listed are ROHS3 compliant, addressing the non-compliant status of the original MAX4613ESE. Selection should account for MSL requirements: parts with MSL-1 rating (DG213 and DG413 Vishay variants) offer unlimited moisture sensitivity protection, while DG413DYZ variants carry MSL-3 rating requiring 168-hour bake-out procedures.

Frequently Asked Questions (FAQ)

Q: Can DG413DY-E3 or DG413DY-T1-E3 be used as direct replacements for MAX4613ESE?

A: Yes. Both parts maintain the 4-circuit SPST configuration, 16-SOIC package, and -40°C to 85°C operating temperature range. The 35Ohm on-state resistance is lower than the original 70Ohm specification, which is electrically compatible. Supply voltage ranges (5V to 44V single, ±5V to ±20V dual) encompass the original specification. The primary difference is improved electrical performance with lower leakage current and reduced crosstalk.

Q: What is the difference between DG413DY-E3 and DG413DY-T1-E3?

A: Both parts are electrically identical with 35Ohm on-state resistance and identical electrical specifications. The difference is packaging: DG413DY-E3 is supplied in Tube packaging, while DG413DY-T1-E3 is supplied in Cut Tape (CT) & Digi-Reel® format. Inventory availability differs (1158 pcs versus 20100 pcs respectively).

Q: Why do DG413DYZ and DG413DYZ-T have MSL-3 rating instead of MSL-1?

A: MSL-3 rating indicates a 168-hour moisture sensitivity level. These Renesas variants require bake-out procedures before reflow soldering if storage conditions exceed specified humidity and temperature limits. MSL-1 rated parts (DG213 and DG413 Vishay variants) have unlimited moisture sensitivity protection and do not require bake-out procedures.

Q: Can DG213DY-E3 be used in applications requiring 4.5V single supply operation?

A: No. DG213DY-E3 specifies a minimum single supply voltage of 13V, which does not encompass the 4.5V lower limit of the original MAX4613ESE. This part is suitable only for applications operating at 13V or higher single supply voltage.

Q: What are the key electrical differences between substitute options?

A: On-state resistance varies from 35Ohm (DG413 series) to 60Ohm (DG213 series) to 70Ohm (MAX4613ESE+). Leakage current ranges from 100pA (DG413DYZ variants) to 500pA (original and DG213 series). Crosstalk performance varies from -85dB to -100dB depending on measurement frequency. Charge injection ranges from 1pC (DG213 series) to 5pC (original and DG413 series). Channel capacitance ranges from 4pF to 9pF. All parts maintain identical 4-circuit SPST configuration and 16-SOIC package.

Q: Is MAX4613ESE+ recommended over other substitutes?

A: MAX4613ESE+ is recommended when identical electrical specifications to the original MAX4613ESE are required. This part maintains 70Ohm on-state resistance and all original performance characteristics while providing ROHS3 compliance and active production status. Alternative parts (DG213 and DG413 series) are recommended when improved electrical performance or specific supply voltage requirements justify the specification changes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message