Request Quote
(Ships tomorrow)
MAX4613ESE+ Equivalent & Substitute Parts
Part Overview
The MAX4613ESE+ is a 4-circuit IC switch manufactured by Analog Devices Inc./Maxim Integrated, configured as SPST NO/NC with 70Ohm on-state resistance. This active product operates across single supply (4.5V to 40V) and dual supply (±4.5V to ±20V) configurations, making it suitable for signal routing and multiplexing applications in industrial and consumer electronics. Substitute parts are identified based on matching circuit topology, package form factor, and electrical performance within specified operating ranges.
Substiute Parts
Key Parameters
| Parameter | MAX4613ESE+ |
|---|---|
| Switch Circuit | SPST - NO/NC |
| Number of Circuits | 4 |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| On-State Resistance (Max) | 70Ohm |
| Channel-to-Channel Matching (ΔRon) | 4Ohm (Max) |
| Voltage - Supply, Single (V+) | 4.5V ~ 40V |
| Voltage - Supply, Dual (V±) | ±4.5V ~ 20V |
| Switch Time (Ton, Toff) (Max) | 250ns, 120ns |
| Charge Injection | 5pC |
| Channel Capacitance (CS(off), CD(off)) | 4pF, 4pF |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Crosstalk | -100dB @ 1MHz |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Package / Case | 16-SOIC (0.154", 3.90mm Width) |
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitution eligibility for the MAX4613ESE+ is determined by the following criteria:
Circuit Architecture: All substitute parts must maintain SPST NO/NC topology with 4 circuits in 1:1 multiplexer/demultiplexer configuration.
Package Compatibility: All substitutes must use 16-SOIC (0.154", 3.90mm Width) surface mount package to ensure PCB layout compatibility.
Operating Temperature Range: All parts must support -40°C to 85°C operating temperature.
Supply Voltage Compatibility: Substitute parts must operate within overlapping voltage ranges. The MAX4613ESE+ accepts 4.5V to 40V single supply or ±4.5V to ±20V dual supply. Substitutes with narrower ranges (such as 5V to 44V or 13V to 36V) remain compatible within their specified limits.
Electrical Performance: On-state resistance, leakage current, and switching characteristics vary among substitutes but remain within acceptable ranges for signal routing applications. Lower on-state resistance values (35Ohm, 60Ohm) provide improved performance compared to the 70Ohm specification.
Compliance: All substitutes maintain ROHS3 compliance and EAR99 classification.
Parameter Comparison
| Parameter | MAX4613ESE+ | DG213DY-E3 | DG213DY-T1-E3 | DG413DY-E3 | DG413DY-T1-E3 | DG413DYZ | DG413DYZ-T |
|---|---|---|---|---|---|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated | Vishay Siliconix | Vishay Siliconix | Vishay Siliconix | Vishay Siliconix | Renesas Electronics Corporation | Renesas Electronics Corporation |
| Switch Circuit | SPST - NO/NC | SPST - NO/NC | SPST - NO/NC | SPST - NO/NC | SPST - NO/NC | SPST - NO/NC | SPST - NO/NC |
| Number of Circuits | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| On-State Resistance (Max) | 70Ohm | 60Ohm | 60Ohm | 35Ohm | 35Ohm | 35Ohm | 35Ohm |
| Voltage - Supply, Single (V+) | 4.5V ~ 40V | 13V ~ 36V | 13V ~ 36V | 5V ~ 44V | 5V ~ 44V | 5V ~ 44V | 5V ~ 44V |
| Voltage - Supply, Dual (V±) | ±4.5V ~ 20V | ±7V ~ 22V | ±7V ~ 22V | ±5V ~ 20V | ±5V ~ 20V | ±5V ~ 20V | ±5V ~ 20V |
| Switch Time (Ton, Toff) (Max) | 250ns, 120ns | 130ns, 100ns | 130ns, 100ns | 175ns, 145ns | 175ns, 145ns | 175ns, 145ns | 175ns, 145ns |
| Charge Injection | 5pC | 1pC | 1pC | 5pC | 5pC | 5pC | 5pC |
| Current - Leakage (IS(off)) (Max) | 500pA | 500pA | 500pA | 250pA | 250pA | 100pA | 100pA |
| Operating Temperature | -40°C ~ 85°C (TA) | -40°C ~ 85°C (TA) | -40°C ~ 85°C (TA) | -40°C ~ 85°C (TA) | -40°C ~ 85°C (TA) | -40°C ~ 85°C (TA) | -40°C ~ 85°C (TA) |
| Package / Case | 16-SOIC (0.154", 3.90mm Width) | 16-SOIC (0.154", 3.90mm Width) | 16-SOIC (0.154", 3.90mm Width) | 16-SOIC (0.154", 3.90mm Width) | 16-SOIC (0.154", 3.90mm Width) | 16-SOIC (0.154", 3.90mm Width) | 16-SOIC (0.154", 3.90mm Width) |
| RoHS Status | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 3 (168 Hours) | 3 (168 Hours) |
Engineering Selection Recommendations
DG213DY-E3 and DG213DY-T1-E3 (Vishay Siliconix): These parts offer 60Ohm on-state resistance with improved switching performance (130ns/100ns) and reduced charge injection (1pC). Supply voltage range is 13V to 36V single supply or ±7V to ±22V dual supply. Selection is appropriate for applications operating within these voltage boundaries. DG213DY-T1-E3 provides higher inventory availability (3350 Pcs) in Cut Tape & Digi-Reel packaging.
DG413DY-E3 and DG413DY-T1-E3 (Vishay Siliconix): These parts provide 35Ohm on-state resistance with extended supply voltage range (5V to 44V single supply or ±5V to ±20V dual supply), matching the lower voltage boundary of the MAX4613ESE+. Switching performance is 175ns/145ns with 5pC charge injection. DG413DY-T1-E3 offers significantly higher inventory (20100 Pcs) in Cut Tape & Digi-Reel packaging.
DG413DYZ and DG413DYZ-T (Renesas Electronics Corporation): These parts match the DG413 electrical specifications (35Ohm on-state resistance, 5V to 44V supply range) with superior leakage current performance (100pA maximum). Moisture sensitivity level is MSL 3 (168 Hours), requiring controlled storage conditions. DG413DYZ-T provides Cut Tape & Digi-Reel packaging with 3900 Pcs inventory.
All substitute parts maintain ROHS3 compliance and EAR99 classification consistent with the MAX4613ESE+.
Frequently Asked Questions (FAQ)
Q: Can DG213DY-E3 replace MAX4613ESE+ in all applications?
A: DG213DY-E3 is compatible only in applications where supply voltage operates within 13V to 36V (single) or ±7V to ±22V (dual). Applications requiring operation below 13V single supply or below ±7V dual supply require DG413 series parts instead.
Q: What is the difference between DG413DY-E3 and DG413DYZ?
A: Both parts share identical electrical specifications (35Ohm on-state resistance, 5V to 44V supply range, 175ns/145ns switching time). The primary difference is leakage current: DG413DY-E3 specifies 250pA maximum, while DG413DYZ specifies 100pA maximum. DG413DYZ has MSL 3 (168 Hours) moisture sensitivity versus MSL 1 (Unlimited) for DG413DY-E3.
Q: What packaging options are available?
A: Tube packaging is available for DG213DY-E3 and DG413DY-E3. Cut Tape & Digi-Reel packaging is available for DG213DY-T1-E3, DG413DY-T1-E3, and DG413DYZ-T. All parts use 16-SOIC (0.154", 3.90mm Width) surface mount package.
Q: Are all substitutes ROHS3 compliant?
A: Yes, all listed substitute parts are ROHS3 compliant and REACH unaffected, matching the MAX4613ESE+ compliance status.
Q: Which substitute offers the best leakage current performance?
A: DG413DYZ and DG413DYZ-T offer the lowest leakage current specification at 100pA maximum, compared to 500pA for MAX4613ESE+ and 250pA for DG413DY-E3/DG413DY-T1-E3.
Q: What is the impact of on-state resistance differences?
A: Lower on-state resistance reduces signal attenuation and power dissipation. DG413 series (35Ohm) provides superior performance compared to MAX4613ESE+ (70Ohm) and DG213 series (60Ohm). Selection depends on application requirements for signal integrity and thermal management.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts