MAX4606CSE+ Equivalent & Substitute Parts

Part Overview

The MAX4606CSE+ is a 4-circuit IC switch manufactured by Analog Devices Inc./Maxim Integrated, configured as SPST (Single Pole Single Throw) NO/NC (Normally Open/Normally Closed) with 4Ohm on-state resistance. This component operates across single supply voltages of 4.5V to 36V or dual supply voltages of ±4.5V to ±20V, making it suitable for signal routing and switching applications in industrial and consumer electronics. The device is currently in active production status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Given its active status and broad availability, substitute identification focuses on maintaining electrical and mechanical compatibility within the specified parameter envelope.

Substiute Parts

MAX4606CSE+

Analog Devices Inc./Maxim IntegratedIn Stock: 2243MAX4606CSE+ Datasheet

Current PartRFQ

MAX4606CSE+

Analog Devices Inc./Maxim IntegratedIn Stock: 2243MAX4606CSE+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the MAX4606CSE+ is determined by strict equivalence across the following critical parameters:

Electrical Compatibility Requirements:

• Switch circuit configuration: SPST - NO/NC (4 circuits)
• On-state resistance: 4Ohm maximum
• Channel-to-channel matching: 200mOhm maximum
• Supply voltage range: 4.5V ~ 36V (single) or ±4.5V ~ 20V (dual)
• Switch timing: 120ns (Ton) and 130ns (Toff) maximum
• Charge injection: 225pC
• Channel capacitance: 34pF (CS(off) and CD(off))
• Leakage current: 500pA maximum
• Crosstalk performance: -60dB @ 1MHz

Mechanical Compatibility Requirements:

• Package type: 16-SOIC surface mount
• Package dimensions: 0.154" width (3.90mm)

Compliance Requirements:

• RoHS3 compliance
• MSL rating: 1 (Unlimited)

Based on the provided input data, the MAX4606CSE+ is identified as both the main part and the direct substitute, indicating full parameter equivalence with no alternative part numbers listed in the substitute database.

Parameter Comparison

Engineering Selection Recommendations

The MAX4606CSE+ maintains active production status with full RoHS3 compliance and unlimited moisture sensitivity rating. Component selection should prioritize parts meeting all specified electrical parameters within the defined tolerance envelope. The 4Ohm on-state resistance with 200mOhm channel-to-channel matching ensures consistent signal routing performance across all four circuits. Supply voltage flexibility (4.5V to 36V single or ±4.5V to ±20V dual) accommodates diverse system architectures. The 16-SOIC surface mount package with 0.154" width integrates into standard PCB layouts. Leakage current specification of 500pA maximum and crosstalk performance of -60dB @ 1MHz support low-noise signal switching applications. All parts selected must maintain RoHS3 compliance and MSL 1 rating for manufacturing process compatibility.

Frequently Asked Questions (FAQ)

Q: What defines electrical compatibility for MAX4606CSE+ substitutes? A: Electrical compatibility requires matching on-state resistance (4Ohm maximum), channel-to-channel matching (200mOhm maximum), supply voltage range (4.5V ~ 36V single or ±4.5V ~ 20V dual), switch timing (120ns Ton, 130ns Toff maximum), charge injection (225pC), channel capacitance (34pF), leakage current (500pA maximum), and crosstalk performance (-60dB @ 1MHz).

Q: Are there mechanical compatibility constraints? A: Yes. Substitute parts must use the 16-SOIC surface mount package with 0.154" width (3.90mm). Package dimensions and pin configuration must match the original specification for PCB layout compatibility.

Q: What compliance certifications are required for substitutes? A: All substitute parts must maintain RoHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating. These certifications ensure manufacturing process compatibility and environmental regulatory adherence.

Q: Can the MAX4606CSE+ operate in both single and dual supply configurations? A: Yes. The device supports single supply operation from 4.5V to 36V (V+) and dual supply operation from ±4.5V to ±20V (V±). Application circuit design determines which supply configuration is used.

Q: What is the significance of the 200mOhm channel-to-channel matching specification? A: Channel-to-channel matching (ΔRon) of 200mOhm maximum ensures consistent on-state resistance across all four circuits within the device. This specification is critical for applications requiring balanced signal routing and minimal crosstalk between channels.

Q: Is the MAX4606CSE+ suitable for high-frequency signal switching? A: The device supports switching applications with crosstalk performance of -60dB @ 1MHz and charge injection of 225pC. Operating temperature range of 0°C to 70°C defines the thermal operating envelope for frequency-dependent performance.