MAX4567CEE+ Equivalent & Substitute Parts

Part Overview

The MAX4567CEE+ is a video switch IC manufactured by Analog Devices Inc./Maxim Integrated, designed for dual-channel video signal routing applications. This interface component operates as a 2:1 multiplexer/demultiplexer with SPDT (Single Pole Double Throw) switch configuration and bi-directional signal capability. The part is currently in active production status and is widely used in video signal distribution and switching circuits. Identifying equivalent substitute parts is necessary to ensure supply chain flexibility, optimize procurement costs, and maintain design continuity when the primary part number becomes unavailable or when alternative packaging formats better suit manufacturing requirements.

Substiute Parts

MAX4567CEE+

Analog Devices Inc./Maxim IntegratedIn Stock: 1011MAX4567CEE+ Datasheet

Current PartRFQ

MAX4567CEE+T

Analog Devices Inc./Maxim IntegratedIn Stock: 1235MAX4567CEE+T Datasheet

DirectRFQ

MAX4567CEE+

Analog Devices Inc./Maxim IntegratedIn Stock: 1011MAX4567CEE+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MAX4567CEE+ are determined by strict equivalence across all critical electrical and mechanical parameters. The substitution logic is based on the following key criteria:

Electrical Equivalence: All substitute parts must maintain identical specifications for multiplexer/demultiplexer circuit configuration (2:1), switch circuit type (SPDT), number of channels (2), on-state resistance (60 Ohm maximum), supply voltage ranges (2.7V ~ 12V single supply; ±2.7V ~ 6V dual supply), -3dB bandwidth (350 MHz), and operating temperature range (0°C ~ 70°C).

Functional Features: All substitute parts must include bi-directional signal capability, break-before-make switching behavior, and T-switch configuration.

Mechanical Compatibility: All substitute parts must use identical surface mount packaging (16-SSOP with 0.154" / 3.90mm width) and 16-QSOP supplier device package designation.

Compliance & Certification: All substitute parts must maintain ROHS3 compliance, MSL Level 1 (Unlimited), REACH Unaffected status, and active product status from the same manufacturer.

Packaging Format Variation: The only allowable variation between the main part and substitutes is the packaging format (Tube versus Tape & Reel), which does not affect electrical or mechanical performance but impacts procurement and assembly workflows.

Parameter Comparison

Engineering Selection Recommendations

Both the MAX4567CEE+ and MAX4567CEE+T are functionally and electrically identical, differing only in packaging format. Selection between these parts should be based on procurement and assembly requirements rather than technical performance.

MAX4567CEE+ (Tube Packaging): Select this part number when manual component handling, small-volume production runs, or kit-based assembly processes are employed. Tube packaging is suitable for bench assembly and prototyping environments.

MAX4567CEE+T (Tape & Reel Packaging): Select this part number for high-volume automated assembly operations, pick-and-place machine compatibility, and streamlined manufacturing workflows. Tape & Reel format reduces handling labor and integrates seamlessly with modern surface mount assembly lines.

Both parts maintain identical active product status, full ROHS3 compliance, unlimited moisture sensitivity rating, and REACH unaffected certification. No technical re-qualification is required when switching between these part numbers within the same design.

Frequently Asked Questions (FAQ)

Q: Are MAX4567CEE+ and MAX4567CEE+T electrically interchangeable?

A: Yes. Both part numbers are electrically and functionally identical. They share identical electrical specifications, including 2:1 multiplexer/demultiplexer configuration, SPDT switch circuit, 60 Ohm on-state resistance, 350 MHz bandwidth, and bi-directional switching capability. The only difference is packaging format (Tube versus Tape & Reel).

Q: What is the difference between Tube and Tape & Reel packaging?

A: Tube packaging contains individual components in a plastic tube suitable for manual handling and small-quantity orders. Tape & Reel packaging places components on a continuous carrier tape wound on a reel, optimized for automated pick-and-place assembly equipment. Both formats contain the same die and lead frame.

Q: Can I use MAX4567CEE+T in place of MAX4567CEE+ in my design?

A: Yes, without any design modifications. Both parts use identical 16-SSOP surface mount packages with 0.154" / 3.90mm width and 16-QSOP supplier device package designation. PCB footprints and solder reflow profiles are identical.

Q: Are there any compliance or certification differences between these part numbers?

A: No. Both parts maintain identical ROHS3 compliance, MSL Level 1 (Unlimited) moisture sensitivity rating, REACH Unaffected status, and active product status from Analog Devices Inc./Maxim Integrated.

Q: Which part number should I specify for high-volume production?

A: MAX4567CEE+T (Tape & Reel) is recommended for high-volume automated assembly. This format reduces component handling costs and integrates directly with surface mount assembly lines.

Q: Which part number should I specify for prototyping or low-volume builds?

A: MAX4567CEE+ (Tube) is suitable for prototyping, small-volume production, and manual assembly environments where individual component handling is standard practice.

Q: Do both part numbers have the same lead time and availability?

A: Lead times and availability may vary based on current inventory levels and supplier stock. Consult your component distributor for current availability of both part numbers. As of the reference data provided, MAX4567CEE+T shows 1141 pieces in stock and MAX4567CEE+ shows 911 pieces in stock.