MAX4566EEE+ Equivalent & Substitute Parts Reference

Part Overview

The MAX4566EEE+ is a video switch integrated circuit manufactured by Analog Devices Inc./Maxim Integrated. This dual SPST video switch operates as a 1-channel, 4PST multiplexer/demultiplexer circuit in a 16-QSOP surface mount package. The device is designed for video signal routing applications requiring bi-directional switching with break-before-make functionality. The MAX4566EEE+ maintains active product status with 2300 units currently in stock as new original inventory.

Substiute Parts

MAX4566EEE+

Analog Devices Inc./Maxim IntegratedIn Stock: 2359MAX4566EEE+ Datasheet

Current PartRFQ

MAX4566EEE+

Analog Devices Inc./Maxim IntegratedIn Stock: 2359MAX4566EEE+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MAX4566EEE+ is determined by strict equivalence across the following critical parameters:

• Switch Circuit Configuration: Must be 4PST (4 Pole Single Throw)
• Number of Channels: Must be 1 channel
• Multiplexer/Demultiplexer Circuit: Must be 2:2
• On-State Resistance (Max): Must not exceed 60 Ohm
• Voltage Supply Ranges: Must support both single supply (2.7V ~ 12V) and dual supply (±2.7V ~ 6V)
• -3dB Bandwidth: Must be 350 MHz or greater
• Package / Case: Must be 16-SSOP (0.154", 3.90mm Width)
• Mounting Type: Must be Surface Mount
• Operating Temperature Range: Must cover -40°C ~ 85°C (TA)

Based on the provided input data, the MAX4566EEE+ is listed as its own direct equivalent. No additional substitute parts are specified in the substitute part list.

Parameter Comparison

Engineering Selection Recommendations

The MAX4566EEE+ is an active product with full ROHS3 compliance and REACH unaffected status, making it suitable for current design implementations. The device carries MSL 1 (Unlimited) moisture sensitivity classification, indicating minimal handling restrictions during assembly and storage.

Selection of the MAX4566EEE+ is appropriate for applications requiring video signal switching with the specified electrical and thermal performance characteristics. The active product status ensures continued availability and manufacturing support.

Frequently Asked Questions (FAQ)

Q: What defines a valid substitute for the MAX4566EEE+?

A: A valid substitute must match all critical parameters: 4PST switch configuration, 1 channel, 2:2 multiplexer/demultiplexer circuit, maximum on-state resistance of 60 Ohm, dual voltage supply capability (2.7V ~ 12V single, ±2.7V ~ 6V dual), 350 MHz bandwidth minimum, 16-SSOP package, surface mount mounting, and -40°C ~ 85°C operating temperature range.

Q: Is the MAX4566EEE+ available in alternative packages?

A: The MAX4566EEE+ is specified in the 16-SSOP (0.154", 3.90mm Width) package only. Substitutes must use the identical package footprint to ensure PCB compatibility without redesign.

Q: What is the significance of the 4PST configuration?

A: The 4PST (4 Pole Single Throw) configuration enables simultaneous switching of four independent signal paths from a single control input. This architecture is essential for video multiplexing applications where multiple signal channels require coordinated switching.

Q: Does the MAX4566EEE+ support both single and dual supply operation?

A: Yes. The device operates with single supply voltage from 2.7V to 12V or dual supply voltage from ±2.7V to ±6V, providing flexibility for different circuit topologies.

Q: What is the break-before-make feature?

A: Break-before-make ensures that the switch disconnects the previous signal path before establishing a new connection, preventing signal glitches and cross-talk during switching transitions.