Request Quote
(Ships tomorrow)
MAX4552ESE Equivalent & Substitute Parts
Part Overview
The MAX4552ESE is a 4-circuit IC switch with SPST-NO (Single Pole Single Throw - Normally Open) configuration manufactured by Analog Devices Inc./Maxim Integrated. This component operates as a 1:1 multiplexer/demultiplexer with 120Ohm on-state resistance and is housed in a 16-SOIC surface mount package. The MAX4552ESE is currently listed as obsolete, making identification of equivalent and substitute parts essential for ongoing system support and new design implementations.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Switch Circuit Type | SPST - NO |
| Number of Circuits | 4 |
| Multiplexer/Demultiplexer Configuration | 1:1 |
| On-State Resistance (Max) | 120Ohm |
| Channel-to-Channel Matching (ΔRon) | 1Ohm |
| Voltage - Supply, Single (V+) | 2V ~ 12V |
| Voltage - Supply, Dual (V±) | ±2V ~ 6V |
| Switch Time (Ton, Toff) (Max) | 110ns, 90ns |
| Charge Injection | 2pC |
| Channel Capacitance (CS(off), CD(off)) | 4.6pF, 3pF |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Crosstalk | -90dB @ 100kHz |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Package / Case | 16-SOIC (0.154", 3.90mm Width) |
| Mounting Type | Surface Mount |
Substitute Part Grouping Explanation
Substitution of the MAX4552ESE is determined by strict equivalence across the following critical parameters:
- Switch circuit topology: SPST - NO configuration with 4 circuits
- Electrical performance: 120Ohm on-state resistance, 1Ohm channel-to-channel matching, 110ns/90ns switch times
- Supply voltage compatibility: 2V ~ 12V single supply or ±2V ~ 6V dual supply operation
- Signal integrity specifications: 2pC charge injection, -90dB crosstalk @ 100kHz
- Package compatibility: 16-SOIC surface mount form factor
- Operating temperature range: -40°C ~ 85°C
The MAX4552ESE+ meets all these criteria and is identified as a direct substitute.
Parameter Comparison
| Parameter | MAX4552ESE | MAX4552ESE+ |
|---|---|---|
| Switch Circuit | SPST - NO | SPST - NO |
| Number of Circuits | 4 | 4 |
| Multiplexer/Demultiplexer Circuit | 1:1 | 1:1 |
| On-State Resistance (Max) | 120Ohm | 120Ohm |
| Channel-to-Channel Matching (ΔRon) | 1Ohm | 1Ohm |
| Voltage - Supply, Single (V+) | 2V ~ 12V | 2V ~ 12V |
| Voltage - Supply, Dual (V±) | ±2V ~ 6V | ±2V ~ 6V |
| Switch Time (Ton, Toff) (Max) | 110ns, 90ns | 110ns, 90ns |
| Charge Injection | 2pC | 2pC |
| Channel Capacitance (CS(off), CD(off)) | 4.6pF, 3pF | 4.6pF, 3pF |
| Current - Leakage (IS(off)) (Max) | 1nA | 1nA |
| Crosstalk | -90dB @ 100kHz | -90dB @ 100kHz |
| Operating Temperature | -40°C ~ 85°C (TA) | -40°C ~ 85°C (TA) |
| Package / Case | 16-SOIC (0.154", 3.90mm Width) | 16-SOIC (0.154", 3.90mm Width) |
| Mounting Type | Surface Mount | Surface Mount |
| Product Status | Obsolete | Active |
| RoHS Status | RoHS non-compliant | ROHS3 Compliant |
| Packaging | Not specified | Tube |
Engineering Selection Recommendations
The MAX4552ESE+ is the direct substitute for the MAX4552ESE. Both parts are electrically and mechanically identical across all functional parameters. The primary distinction is product status and regulatory compliance:
The MAX4552ESE is obsolete and RoHS non-compliant. The MAX4552ESE+ is an active product with ROHS3 compliance, making it the appropriate selection for new designs and ongoing production support. The MAX4552ESE+ is supplied in tube packaging, whereas the original part's packaging specification is not documented.
For applications requiring the MAX4552ESE, transition to MAX4552ESE+ to ensure long-term component availability and regulatory compliance with current environmental standards.
Frequently Asked Questions (FAQ)
Q: Can MAX4552ESE+ be used as a direct replacement for MAX4552ESE in existing designs?
A: Yes. The MAX4552ESE+ is electrically and mechanically equivalent. All electrical parameters, including on-state resistance, switch timing, supply voltage ranges, and operating temperature, are identical. The 16-SOIC package dimensions are the same, enabling direct PCB compatibility.
Q: What is the primary reason to substitute MAX4552ESE with MAX4552ESE+?
A: The MAX4552ESE is obsolete. The MAX4552ESE+ is an active product with current manufacturing support. Additionally, MAX4552ESE+ meets ROHS3 compliance requirements, whereas the original part is RoHS non-compliant.
Q: Are there any packaging differences between these parts?
A: The MAX4552ESE+ is supplied in tube packaging. The original MAX4552ESE packaging specification is not documented. Both parts use the same 16-SOIC surface mount package form factor.
Q: What are the critical parameters that define substitution eligibility for this IC switch?
A: Substitution is determined by equivalence in switch circuit topology (SPST-NO, 4 circuits), on-state resistance (120Ohm), channel matching (1Ohm), supply voltage ranges (2V ~ 12V single or ±2V ~ 6V dual), switch timing (110ns/90ns), charge injection (2pC), crosstalk performance (-90dB @ 100kHz), and 16-SOIC package compatibility.
Q: Is the MAX4552ESE+ suitable for applications with strict RoHS compliance requirements?
A: Yes. The MAX4552ESE+ is ROHS3 compliant and meets current environmental and regulatory standards for component manufacturing and use.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts