Request Quote
(Ships tomorrow)
MAX4513ESE+ Equivalent & Substitute Parts
Part Overview
The MAX4513ESE+ is a 4-circuit IC switch manufactured by Analog Devices Inc./Maxim Integrated, configured as SPST NO/NC with 160Ohm on-state resistance in a 16-SOIC surface mount package. This part is Active status and ROHS3 compliant. Equivalent and substitute parts are identified based on matching functional circuit topology, package form factor, and electrical operating parameters within acceptable ranges for the application requirements.
Substiute Parts
Key Parameters
| Parameter | MAX4513ESE+ |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Switch Circuit | SPST - NO/NC |
| Number of Circuits | 4 |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| On-State Resistance (Max) | 160Ohm |
| Voltage - Supply, Single (V+) | 9V ~ 36V |
| Voltage - Supply, Dual (V±) | ±4.5V ~ 18V |
| Switch Time (Ton, Toff) (Max) | 500ns, 400ns |
| Charge Injection | 1.5pC |
| Channel Capacitance (CS(off), CD(off)) | 10pF, 5pF |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Crosstalk | -66dB @ 1MHz |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Package / Case | 16-SOIC (0.154", 3.90mm Width) |
| RoHS Status | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitution eligibility for the MAX4513ESE+ is determined by the following critical parameters:
- Circuit Topology: SPST NO/NC configuration with 4 circuits in 1:1 multiplexer/demultiplexer arrangement
- Package Compatibility: 16-SOIC surface mount form factor (0.154", 3.90mm width)
- On-State Resistance: Maximum 160Ohm specification
- Supply Voltage Range: Compatibility with 9V ~ 36V single supply or ±4.5V ~ 18V dual supply
- Switching Performance: Switch time and charge injection characteristics
- Leakage Current: Maximum 500pA specification
- Operating Temperature: -40°C ~ 85°C range
- Compliance: ROHS3 compliant, MSL 1 rating
Substitute parts must maintain the same circuit topology, package type, and electrical specifications within the defined ranges. Parts with lower on-state resistance, faster switching times, or extended temperature ranges are functionally compatible but represent performance enhancements rather than direct equivalents.
Parameter Comparison
| Parameter | MAX4513ESE+ | ADG1313YRZ | ADG513BRZ | DG456EY-T1-E3 | LTC203CS#TRPBF |
|---|---|---|---|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated | Analog Devices Inc. | Analog Devices Inc. | Vishay Siliconix | Analog Devices Inc. |
| Switch Circuit | SPST - NO/NC | SPST - NO/NC | SPST - NO/NC | SPST - NO/NC | SPST - NO/NC |
| Number of Circuits | 4 | 4 | 4 | 4 | 4 |
| Multiplexer/Demultiplexer Circuit | 1:1 | 1:1 | 1:1 | 1:1 | 1:1 |
| On-State Resistance (Max) | 160Ohm | 200Ohm | 30Ohm (Typ) | 5.3Ohm | 125Ohm |
| Voltage - Supply, Single (V+) | 9V ~ 36V | 12V | 3V ~ 5.5V | 12V ~ 36V | 5V |
| Voltage - Supply, Dual (V±) | ±4.5V ~ 18V | ±15V | ±4.5V ~ 5.5V | ±5V ~ 15V | ±15V |
| Switch Time (Ton, Toff) (Max) | 500ns, 400ns | 125ns, 50ns | 200ns, 120ns (Typ) | 118ns, 97ns | 400ns, 300ns |
| Charge Injection | 1.5pC | 2pC | 11pC | 22pC | 8pC |
| Current - Leakage (IS(off)) (Max) | 500pA | 10nA | 100pA | 500pA | 5nA |
| Crosstalk | -66dB @ 1MHz | -90dB @ 1MHz | -85dB @ 1MHz | -85dB @ 1MHz | -90dB @ 100kHz |
| Operating Temperature | -40°C ~ 85°C (TA) | -40°C ~ 105°C (TA) | -40°C ~ 85°C (TA) | -40°C ~ 125°C (TA) | 0°C ~ 70°C (TA) |
| Package / Case | 16-SOIC (0.154", 3.90mm Width) | 16-SOIC (0.154", 3.90mm Width) | 16-SOIC (0.154", 3.90mm Width) | 16-SOIC (0.154", 3.90mm Width) | 16-SOIC (0.154", 3.90mm Width) |
| RoHS Status | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) |
Engineering Selection Recommendations
All listed substitute parts maintain ROHS3 compliance and MSL 1 rating, meeting the same environmental and handling requirements as the MAX4513ESE+. Selection among substitutes depends on application-specific electrical requirements:
ADG1313YRZ / ADG1313YRZ-REEL7: Suitable for applications requiring extended operating temperature range (-40°C to 105°C) and improved crosstalk performance (-90dB @ 1MHz). On-state resistance of 200Ohm is within acceptable tolerance for most switching applications. Dual supply operation at ±15V provides flexibility for analog signal switching.
ADG513BRZ / ADG513BRZ-REEL / ADG513BRZ-REEL7: Optimized for low-voltage applications (3V ~ 5.5V single supply). Significantly lower on-state resistance (30Ohm typical) reduces power dissipation in signal path. Faster switching times (200ns, 120ns) improve dynamic performance. Suitable for digital logic level switching and low-impedance signal routing.
DG456EY-T1-E3: Provides lowest on-state resistance (5.3Ohm) and fastest switching performance (118ns, 97ns). Extended operating temperature range (-40°C to 125°C) supports harsh environment applications. Higher charge injection (22pC) and channel capacitance may impact precision analog applications. Tape & Reel packaging supports high-volume production.
LTC203CS#TRPBF: Delivers on-state resistance (125Ohm) closest to MAX4513ESE+ specification. Optimized for ±15V dual supply operation. Operating temperature range limited to 0°C ~ 70°C; not suitable for extended temperature applications. Tape & Reel packaging available for production volumes.
Frequently Asked Questions (FAQ)
Q: Can ADG513BRZ replace MAX4513ESE+ in a 12V single supply application?
A: No. ADG513BRZ maximum single supply rating is 5.5V. For 12V single supply operation, use ADG1313YRZ (12V rated) or DG456EY-T1-E3 (12V ~ 36V rated).
Q: What is the impact of on-state resistance differences between substitute parts?
A: On-state resistance determines signal attenuation and power dissipation in the switch path. Lower resistance (DG456EY-T1-E3 at 5.3Ohm) reduces signal loss and heat generation. Higher resistance (ADG1313YRZ at 200Ohm) increases attenuation. Selection depends on signal level requirements and thermal constraints.
Q: Are packaging variants (Tube vs. Tape & Reel) electrically equivalent?
A: Yes. Tube and Tape & Reel variants of the same part number (e.g., ADG513BRZ vs. ADG513BRZ-REEL vs. ADG513BRZ-REEL7) are electrically identical. Packaging selection is determined by production volume and assembly process requirements.
Q: Which substitute part offers the best performance for precision analog signal switching?
A: ADG1313YRZ provides the lowest charge injection (2pC) and best crosstalk isolation (-90dB @ 1MHz) among the substitutes, making it suitable for precision analog applications. LTC203CS#TRPBF offers comparable crosstalk performance (-90dB @ 100kHz) with lower charge injection (8pC) than DG456EY-T1-E3.
Q: Can LTC203CS#TRPBF operate at -40°C?
A: No. LTC203CS#TRPBF operating temperature range is 0°C ~ 70°C. For extended low-temperature operation, use ADG1313YRZ (-40°C ~ 105°C), ADG513BRZ (-40°C ~ 85°C), or DG456EY-T1-E3 (-40°C ~ 125°C).
Q: What is the difference between ADG1313YRZ and ADG1313YRZ-REEL7?
A: Both parts are electrically identical. ADG1313YRZ is supplied in Tube packaging; ADG1313YRZ-REEL7 is supplied in Tape & Reel (TR) packaging. Selection depends on assembly equipment compatibility and production volume requirements.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts