MAX4430ESA-T Equivalent & Substitute Parts

Part Overview

The MAX4430ESA-T is a voltage feedback amplifier manufactured by Analog Devices Inc./Maxim Integrated, configured as a single-circuit 8-SOIC surface mount device. This component is classified as obsolete, necessitating identification of equivalent and substitute parts for ongoing design support and procurement continuity. The MAX4430ESA-T delivers a slew rate of 100V/µs with a -3dB bandwidth of 180 MHz, suitable for applications requiring moderate-speed signal amplification with controlled power consumption.

Key Parameters

Parameter	Value
Manufacturer Part Number	MAX4430ESA-T
Manufacturer	Analog Devices Inc./Maxim Integrated
Category	Linear, Amplifiers
Amplifier Type	Voltage Feedback
Number of Circuits	1
Package / Case	8-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
Slew Rate	100V/µs
-3dB Bandwidth	180 MHz
Current - Input Bias	11 µA
Voltage - Input Offset	1.25 mV
Current - Supply	11 mA
Current - Output / Channel	60 mA
Voltage - Supply Span (Min)	9 V
Voltage - Supply Span (Max)	11 V
Operating Temperature	-40°C ~ 85°C
Product Status	Obsolete
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the MAX4430ESA-T is determined by the following critical parameters: package type (8-SOIC form factor), amplifier topology (voltage feedback configuration), number of circuits (single circuit), operating temperature range (-40°C ~ 85°C), and supply voltage compatibility (9V to 11V nominal operation).

The substitute parts are grouped into two categories based on functional equivalence:

Category 1: Direct Voltage Feedback Equivalents These parts maintain identical amplifier topology and are pin-compatible within the 8-SOIC package. Substitutes in this category include MAX4430ESA+T, AD8047ARZ, and OPA656U/2K5. These devices preserve the voltage feedback architecture and single-circuit configuration while offering varying performance enhancements in slew rate, bandwidth, and input bias current.

Category 2: Differential Amplifier Alternatives THS4502IDR and THS4503CD represent differential amplifier topologies. These parts differ fundamentally in output type (differential vs. single-ended) and amplifier architecture, requiring circuit redesign for implementation.

Parameter Comparison

Parameter	MAX4430ESA-T	MAX4430ESA+T	AD8047ARZ	OPA656U/2K5	THS4502IDR	THS4503CD
Manufacturer	Analog Devices Inc./Maxim Integrated	Analog Devices Inc./Maxim Integrated	Analog Devices Inc.	Burr Brown	Texas Instruments	Texas Instruments
Amplifier Type	Voltage Feedback	Voltage Feedback	Voltage Feedback	Voltage Feedback	Differential	Differential
Number of Circuits	1	1	1	1	1	1
Package / Case	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Slew Rate	100V/µs	100V/µs	750V/µs	295V/µs	2800V/µs	2800V/µs
-3dB Bandwidth	180 MHz	180 MHz	250 MHz	500 MHz	370 MHz	370 MHz
Current - Input Bias	11 µA	11 µA	1 µA	2 pA	4 µA	4 µA
Voltage - Input Offset	1.25 mV	1.25 mV	1 mV	250 µV	1 mV	1 mV
Current - Supply	11 mA	11 mA	5.8 mA	14 mA	23 mA	23 mA
Current - Output / Channel	60 mA	60 mA	50 mA	70 mA	N/A	N/A
Voltage - Supply Span (Min)	9 V	9 V	6 V	8 V	4.5 V	4.5 V
Voltage - Supply Span (Max)	11 V	11 V	12 V	12 V	15 V	15 V
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	0°C ~ 70°C
Product Status	Obsolete	Active	Active	Active	Active	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	Not specified	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

For Direct Replacement (Pin-Compatible, Voltage Feedback Topology):

MAX4430ESA+T is the primary direct substitute. This part maintains identical electrical specifications and package configuration as the MAX4430ESA-T while offering active product status and improved availability. The only difference is packaging format (Tape & Reel vs. standard packaging), which does not affect electrical performance or PCB integration.

For Performance-Enhanced Substitution (Voltage Feedback Topology):

AD8047ARZ provides enhanced performance characteristics including 750V/µs slew rate (7.5× improvement), 250 MHz bandwidth (1.4× improvement), and significantly reduced input bias current (1 µA vs. 11 µA). This part maintains voltage feedback topology and 8-SOIC package compatibility. Supply voltage range (6V to 12V) encompasses the original 9V to 11V requirement. Active product status and ROHS3 compliance ensure long-term availability and regulatory alignment.

OPA656U/2K5 offers the highest bandwidth performance (500 MHz) with exceptional input bias current (2 pA). This part is suitable for applications requiring maximum signal fidelity and minimal input loading. Supply voltage range (8V to 12V) is compatible with the original specification. High inventory availability (65,980 pcs) supports volume production requirements.

For Differential Output Applications:

THS4502IDR and THS4503CD are differential amplifiers with fundamentally different output architecture. These parts require circuit redesign and are not pin-compatible substitutes. THS4502IDR operates across the full industrial temperature range (-40°C ~ 85°C), while THS4503CD is limited to commercial temperature range (0°C ~ 70°C). Both parts offer significantly higher slew rate (2800V/µs) and bandwidth (370 MHz) but require differential output signal conditioning.

Compliance and Regulatory Considerations:

All recommended voltage feedback substitutes (MAX4430ESA+T, AD8047ARZ, OPA656U/2K5) maintain ROHS3 compliance and MSL Level 1 moisture sensitivity rating, ensuring compatibility with standard manufacturing processes. THS4502IDR and THS4503CD also maintain ROHS3 compliance. All parts carry EAR99 export classification and are REACH unaffected.

Frequently Asked Questions (FAQ)

Q: Can MAX4430ESA+T be used as a direct replacement for MAX4430ESA-T?

A: Yes. MAX4430ESA+T is electrically and functionally identical to MAX4430ESA-T. The only difference is packaging format (Tape & Reel). Both parts share identical electrical specifications, pin configuration, and 8-SOIC package dimensions. The part is currently in active production status.

Q: What are the key differences between voltage feedback and differential amplifier topologies?

A: Voltage feedback amplifiers (MAX4430ESA-T, AD8047ARZ, OPA656U/2K5) produce single-ended output signals referenced to ground. Differential amplifiers (THS4502IDR, THS4503CD) produce output signals referenced between two nodes. Differential topologies require output signal conditioning and cannot be used as direct pin-compatible replacements without circuit modification.

Q: Is AD8047ARZ compatible with the original 9V to 11V supply voltage specification?

A: Yes. AD8047ARZ operates across 6V to 12V supply range, which encompasses the original 9V to 11V requirement. The part maintains stable operation throughout this voltage window.

Q: What is the significance of input bias current differences between substitute parts?

A: Input bias current affects circuit impedance loading and noise performance. The MAX4430ESA-T specifies 11 µA input bias current. AD8047ARZ reduces this to 1 µA, while OPA656U/2K5 achieves 2 pA. Lower input bias current reduces loading on signal sources and improves high-impedance circuit performance. Selection depends on source impedance requirements.

Q: Can THS4503CD be used in applications requiring -40°C to 85°C operation?

A: No. THS4503CD is rated for 0°C to 70°C operating temperature range, which does not meet the original -40°C to 85°C specification. THS4502IDR maintains the full industrial temperature range and is the appropriate differential amplifier choice for extended temperature applications.

Q: What packaging considerations apply to these substitute parts?

A: All substitute parts are configured in 8-SOIC (0.154", 3.90mm width) surface mount packages, maintaining identical PCB footprint compatibility with the original MAX4430ESA-T. No layout modifications are required for package accommodation.

Q: Are all substitute parts ROHS3 compliant?

A: MAX4430ESA+T, AD8047ARZ, THS4502IDR, and THS4503CD are explicitly ROHS3 compliant. OPA656U/2K5 RoHS status is not specified in available documentation. Verify RoHS compliance with the supplier for OPA656U/2K5 if regulatory compliance is required.

Q: What is the impact of higher slew rate in substitute parts?

A: Slew rate determines the maximum rate of output voltage change. The original MAX4430ESA-T specifies 100V/µs. Substitute parts offer higher slew rates (AD8047ARZ: 750V/µs, OPA656U/2K5: 295V/µs, THS4502IDR/THS4503CD: 2800V/µs). Higher slew rate reduces signal distortion in high-frequency applications but does not negatively impact lower-frequency designs. Selection should match application bandwidth requirements.

Q: Which substitute part offers the best overall performance improvement?

A: OPA656U/2K5 provides the highest bandwidth (500 MHz) and lowest input bias current (2 pA), making it optimal for high-fidelity signal conditioning applications. AD8047ARZ offers balanced performance improvement across slew rate, bandwidth, and input bias current with excellent availability. Selection depends on specific application requirements for bandwidth, noise, and power consumption.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message