MAX4331ESA Equivalent & Substitute Parts

Part Overview

The MAX4331ESA is a general-purpose operational amplifier manufactured by Analog Devices Inc./Maxim Integrated, housed in an 8-SOIC surface-mount package. This device features rail-to-rail output capability and is designed for low-power analog signal conditioning applications. The MAX4331ESA is classified as obsolete, making equivalent substitute parts necessary for new designs and ongoing production requirements. Substitute components must maintain functional compatibility across key electrical parameters including supply voltage range, output type, and package configuration.

Key Parameters

Parameter	Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	1	—
Output Type	Rail-to-Rail	—
Package / Case	8-SOIC (0.154", 3.90mm Width)	—
Mounting Type	Surface Mount	—
Voltage - Supply Span (Min)	2.3	V
Voltage - Supply Span (Max)	6.5	V
Operating Temperature	-40 to 85	°C
Slew Rate	1.5	V/µs
Gain Bandwidth Product	3	MHz
Current - Supply	275	µA
Current - Input Bias	25	nA
Voltage - Input Offset	250	µV
Current - Output / Channel	20	mA

Substitute Part Grouping Explanation

Substitution of the MAX4331ESA is determined by strict adherence to the following criteria:

Primary Compatibility Requirements:

Package type: 8-SOIC surface-mount only
Output configuration: Rail-to-rail output
Single-circuit amplifier topology
Supply voltage range overlap with original specification (2.3 V to 6.5 V minimum)
Operating temperature range compatibility

Substitution Categories:

Category 1: Direct Manufacturer Upgrade MAX4331ESA+ represents the active production equivalent from the same manufacturer (Analog Devices Inc./Maxim Integrated). This part maintains identical electrical specifications and package configuration while offering RoHS3 compliance and active product status.

Category 2: Cross-Manufacturer Alternatives (Microchip Technology MCP603 Series) The MCP603-E/SN, MCP603-I/SN, MCP603T-E/SN, and MCP603T-I/SN variants provide functional substitution with differing packaging formats (Tube, Cut Tape & Digi-Reel®, Tape & Reel). These parts share the 8-SOIC package and rail-to-rail output configuration. Electrical parameter variations exist in slew rate (2.3 V/µs vs. 1.5 V/µs), gain bandwidth product (2.8 MHz vs. 3 MHz), input bias current (1 pA vs. 25 nA), and supply current (230 µA vs. 275 µA). Supply voltage minimum increases to 2.7 V.

Category 3: Cross-Manufacturer Alternative (Texas Instruments OPA340 Series) The OPA340UA and OPA340UA/2K5 provide substitution with enhanced electrical performance characteristics. These parts maintain 8-SOIC packaging and rail-to-rail output but feature higher slew rate (6 V/µs), higher gain bandwidth product (5.5 MHz), lower input bias current (0.2 pA), and higher output current capability (50 mA). Supply voltage range is 2.5 V to 5.5 V, with reduced maximum supply voltage compared to the original specification.

Parameter Comparison

Parameter	MAX4331ESA	MAX4331ESA+	MCP603-E/SN	MCP603-I/SN	MCP603T-E/SN	MCP603T-I/SN	OPA340UA	OPA340UA/2K5
Amplifier Type	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose
Number of Circuits	1	1	1	1	1	1	1	1
Output Type	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail	Rail-to-Rail
Package / Case	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Voltage - Supply Span (Min)	2.3 V	2.3 V	2.7 V	2.7 V	2.7 V	2.7 V	2.5 V	2.5 V
Voltage - Supply Span (Max)	6.5 V	6.5 V	6 V	6 V	6 V	6 V	5.5 V	5.5 V
Operating Temperature	-40 to 85°C	-40 to 85°C	-40 to 125°C	-40 to 85°C	-40 to 125°C	-40 to 85°C	-40 to 85°C	-40 to 85°C
Slew Rate	1.5 V/µs	1.5 V/µs	2.3 V/µs	2.3 V/µs	2.3 V/µs	2.3 V/µs	6 V/µs	6 V/µs
Gain Bandwidth Product	3 MHz	3 MHz	2.8 MHz	2.8 MHz	2.8 MHz	2.8 MHz	5.5 MHz	5.5 MHz
Current - Supply	275 µA	275 µA	230 µA	230 µA	230 µA	230 µA	750 µA	750 µA
Current - Input Bias	25 nA	25 nA	1 pA	1 pA	1 pA	1 pA	0.2 pA	0.2 pA
Voltage - Input Offset	250 µV	250 µV	700 µV	700 µV	700 µV	700 µV	150 µV	150 µV
Current - Output / Channel	20 mA	20 mA	22 mA	22 mA	22 mA	22 mA	50 mA	50 mA
RoHS Status	Non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

For Direct Replacement (Recommended Primary Option): MAX4331ESA+ is the preferred substitute. This part maintains identical electrical specifications and 8-SOIC package configuration while offering active product status and RoHS3 compliance. Selection of this part eliminates design modification requirements and ensures long-term supply availability.

For Supply Voltage Range 2.7 V to 6.0 V Applications: The Microchip Technology MCP603 series (MCP603-E/SN, MCP603-I/SN, MCP603T-E/SN, MCP603T-I/SN) provides functional substitution with active product status and RoHS3 compliance. These parts feature lower supply current (230 µA vs. 275 µA) and superior input bias current performance (1 pA vs. 25 nA). The minimum supply voltage increases to 2.7 V, requiring verification against circuit design specifications. Packaging format selection depends on procurement requirements: Tube (MCP603-E/SN), Cut Tape & Digi-Reel® (MCP603-I/SN), Tape & Reel (MCP603T-E/SN), or Cut Tape & Digi-Reel® (MCP603T-I/SN).

For Supply Voltage Range 2.5 V to 5.5 V Applications with Enhanced Performance: The Texas Instruments OPA340 series (OPA340UA, OPA340UA/2K5) provides substitution for applications requiring higher slew rate (6 V/µs vs. 1.5 V/µs), higher gain bandwidth product (5.5 MHz vs. 3 MHz), and superior input offset voltage (150 µV vs. 250 µV). Maximum supply voltage is limited to 5.5 V. These parts feature active product status and RoHS3 compliance. Packaging format selection: Tube (OPA340UA) or Cut Tape & Digi-Reel® (OPA340UA/2K5).

Compliance Considerations: All substitute parts listed are RoHS3 compliant and REACH unaffected, addressing regulatory requirements for new designs. The original MAX4331ESA is RoHS non-compliant, making substitution necessary for applications subject to RoHS directives.

Frequently Asked Questions (FAQ)

Q: Can MAX4331ESA+ be used as a direct drop-in replacement for MAX4331ESA?

A: Yes. MAX4331ESA+ maintains identical electrical specifications, 8-SOIC package configuration, and pinout. The primary difference is active product status and RoHS3 compliance. No circuit modifications are required.

Q: What are the key differences between MAX4331ESA and MCP603 series substitutes?

A: The MCP603 series maintains rail-to-rail output and 8-SOIC packaging but introduces the following parameter variations: minimum supply voltage increases from 2.3 V to 2.7 V; slew rate increases from 1.5 V/µs to 2.3 V/µs; gain bandwidth product decreases from 3 MHz to 2.8 MHz; input bias current decreases from 25 nA to 1 pA; supply current decreases from 275 µA to 230 µA; input offset voltage increases from 250 µV to 700 µV; output current increases from 20 mA to 22 mA; maximum supply voltage decreases from 6.5 V to 6 V. Circuit design verification is required for applications operating below 2.7 V or above 6 V.

Q: What are the key differences between MAX4331ESA and OPA340 series substitutes?

A: The OPA340 series maintains rail-to-rail output and 8-SOIC packaging but introduces the following parameter variations: minimum supply voltage increases from 2.3 V to 2.5 V; maximum supply voltage decreases from 6.5 V to 5.5 V; slew rate increases from 1.5 V/µs to 6 V/µs; gain bandwidth product increases from 3 MHz to 5.5 MHz; input bias current decreases from 25 nA to 0.2 pA; input offset voltage decreases from 250 µV to 150 µV; supply current increases from 275 µA to 750 µA; output current increases from 20 mA to 50 mA. Circuit design verification is required for applications operating below 2.5 V, above 5.5 V, or with strict power consumption constraints.

Q: Are all substitute parts available in the same packaging formats?

A: No. Packaging formats vary by part number and manufacturer. MAX4331ESA+ is available in Tube packaging. MCP603 series is available in Tube (MCP603-E/SN), Cut Tape & Digi-Reel® (MCP603-I/SN), Tape & Reel (MCP603T-E/SN), and Cut Tape & Digi-Reel® (MCP603T-I/SN) formats. OPA340 series is available in Tube (OPA340UA) and Cut Tape & Digi-Reel® (OPA340UA/2K5) formats. Procurement requirements determine appropriate format selection.

Q: Which substitute part offers the best performance improvement?

A: The OPA340 series provides the highest performance metrics: slew rate of 6 V/µs (4× improvement), gain bandwidth product of 5.5 MHz (1.83× improvement), and input offset voltage of 150 µV (40% reduction). However, this performance enhancement results in higher supply current (750 µA vs. 275 µA) and reduced maximum supply voltage (5.5 V vs. 6.5 V). Selection depends on specific application requirements.

Q: Can MCP603 and OPA340 series parts be used interchangeably?

A: No. While both maintain 8-SOIC packaging and rail-to-rail output, they differ in supply voltage range, slew rate, gain bandwidth product, and supply current. MCP603 series is optimized for low-power applications with supply voltage range 2.7 V to 6 V. OPA340 series is optimized for higher-performance applications with supply voltage range 2.5 V to 5.5 V. Circuit design verification is required to confirm compatibility with specific application requirements.

Q: What is the inventory status of substitute parts?

A: MAX4331ESA+ has 2,130 pieces in stock. MCP603-E/SN has 1,433 pieces. MCP603-I/SN has 4,700 pieces. MCP603T-E/SN has 997 pieces. MCP603T-I/SN has 3,000,300 pieces. OPA340UA has 2,136 pieces. OPA340UA/2K5 has 17,800 pieces. Inventory levels support both prototype and production-volume requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message