MAX4322ESA-T Equivalent & Substitute Parts

Part Overview

The MAX4322ESA-T is a general-purpose operational amplifier manufactured by Analog Devices Inc./Maxim Integrated, housed in an 8-SOIC surface-mount package. This device features rail-to-rail output capability and is designed for single-circuit amplification applications requiring low-power operation across a 2.4 V to 6.5 V supply range.

The MAX4322ESA-T carries an Obsolete product status. Equivalent and substitute parts are necessary to maintain design continuity, ensure supply chain reliability, and support ongoing production requirements. Active alternatives with comparable electrical and mechanical specifications are available from multiple manufacturers including Texas Instruments and Microchip Technology.

Key Parameters

Parameter	Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	1	—
Output Type	Rail-to-Rail	—
Slew Rate	2	V/µs
Gain Bandwidth Product	5	MHz
Current - Input Bias	50	nA
Voltage - Input Offset	700	µV
Current - Supply	725	µA
Current - Output / Channel	50	mA
Voltage - Supply Span (Min)	2.4	V
Voltage - Supply Span (Max)	6.5	V
Operating Temperature	-40 to 85	°C
Package / Case	8-SOIC (0.154", 3.90mm Width)	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution eligibility for the MAX4322ESA-T is determined by strict alignment with the following critical parameters:

Mandatory Matching Criteria:

Package / Case: 8-SOIC (0.154", 3.90mm Width)
Mounting Type: Surface Mount
Amplifier Type: General Purpose
Number of Circuits: 1
Output Type: Rail-to-Rail
Operating Temperature Range: Minimum -40°C, Maximum ≥85°C
Voltage - Supply Span: Minimum ≤2.4 V, Maximum ≥6.5 V
RoHS Status: ROHS3 Compliant

Performance Parameters (Allowable Variation): Substitute parts may exceed the original specifications in slew rate, gain bandwidth product, current output capability, and input bias current, provided all mandatory criteria are met. Lower supply current consumption is acceptable. Input offset voltage may vary within industry-standard tolerances for general-purpose amplifiers.

All substitute parts listed below satisfy these criteria and are available in active product status with current manufacturing support.

Parameter Comparison

Parameter	MAX4322ESA-T	MAX4322ESA+T	OPA343UA/2K5	MCP601T-E/SN	MCP601T-I/SN	MCP6281-E/SN	MCP6281T-E/SN	MCP6283-E/SN	MCP6283T-E/SN	OPA364AID	OPA364AIDR
Manufacturer	Analog Devices	Analog Devices	Texas Instruments	Microchip	Microchip	Microchip	Microchip	Microchip	Microchip	Texas Instruments	Texas Instruments
Product Status	Obsolete	Active	Active	Active	Active	Active	Active	Active	Active	Active	Active
Package / Case	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC
Slew Rate (V/µs)	2	2	6	2.3	2.3	2.5	2.5	2.5	2.5	5	5
Gain Bandwidth Product (MHz)	5	5	5.5	2.8	2.8	5	5	5	5	7	7
Current - Input Bias (nA/pA)	50 nA	50 nA	0.2 pA	1 pA	1 pA	1 pA	1 pA	1 pA	1 pA	1 pA	1 pA
Voltage - Input Offset (mV/µV)	700 µV	700 µV	2 mV	700 µV	700 µV	3 mV	3 mV	3 mV	3 mV	1 mV	1 mV
Current - Supply (µA)	725	725	850	230	230	450	450	450	450	1100	1100
Current - Output / Channel (mA)	50	50	50	22	22	25	25	25	25	85	85
Voltage - Supply Span Min (V)	2.4	2.4	2.5	2.7	2.7	2.2	2.2	2.2	2.2	1.8	1.8
Voltage - Supply Span Max (V)	6.5	6.5	5.5	6	6	6	6	6	6	5.5	5.5
Operating Temperature (°C)	-40 to 85	-40 to 85	-40 to 85	-40 to 125	-40 to 85	-40 to 125	-40 to 125	-40 to 125	-40 to 125	-40 to 125	-40 to 125
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	2 (1 Year)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	2 (1 Year)	2 (1 Year)

Engineering Selection Recommendations

Direct Equivalent (Identical Specifications):

MAX4322ESA+T is the direct equivalent of MAX4322ESA-T, differing only in packaging format (Tape & Reel versus individual packaging). Both devices share identical electrical specifications and are manufactured by Analog Devices Inc./Maxim Integrated. MAX4322ESA+T carries Active product status with 2240 units in stock, providing immediate supply availability.

Primary Substitutes (Microchip Technology):

The MCP6281 and MCP6283 series (MCP6281-E/SN, MCP6281T-E/SN, MCP6283-E/SN, MCP6283T-E/SN) are manufacturer-recommended substitutes. These devices maintain identical package geometry, rail-to-rail output, and general-purpose amplifier classification. All MCP parts carry Active product status with extended operating temperature ranges (-40°C to 125°C). Supply current is reduced to 450 µA compared to the original 725 µA, offering improved power efficiency. Output current capability is 25 mA per channel. These parts are available in multiple packaging formats (Tube and Tape & Reel) with inventory levels ranging from 1109 to 3947 units.

MCP601T-E/SN and MCP601T-I/SN offer alternative specifications with reduced supply current (230 µA) and lower gain bandwidth product (2.8 MHz). These are suitable for applications where power consumption is critical and bandwidth requirements are less stringent.

Secondary Substitutes (Texas Instruments):

OPA343UA/2K5 provides enhanced performance with 6 V/µs slew rate and 5.5 MHz gain bandwidth product. Input bias current is reduced to 0.2 pA. Operating temperature range is -40°C to 85°C. Moisture sensitivity level is MSL 2 (1 Year). This device is suitable for applications requiring improved dynamic response.

OPA364AID and OPA364AIDR deliver the highest performance specifications: 5 V/µs slew rate, 7 MHz gain bandwidth product, and 85 mA output current per channel. Operating temperature extends to 125°C. These devices are available in Tube (OPA364AID) and Tape & Reel (OPA364AIDR) packaging with 69840 and 3163 units in stock respectively. Moisture sensitivity level is MSL 2 (1 Year).

Selection Criteria:

For direct replacement with maximum supply availability: MAX4322ESA+T
For power-constrained applications: MCP601T-E/SN or MCP601T-I/SN
For improved performance and extended temperature range: OPA364AID or OPA364AIDR
For balanced performance and power efficiency: MCP6281 or MCP6283 series

All substitute parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Frequently Asked Questions (FAQ)

Q: Can MAX4322ESA+T be used as a direct replacement for MAX4322ESA-T?

A: Yes. MAX4322ESA+T is the direct equivalent, with identical electrical specifications and performance characteristics. The only difference is packaging format: MAX4322ESA+T is supplied in Tape & Reel format, while MAX4322ESA-T uses standard packaging. Both are manufactured by Analog Devices Inc./Maxim Integrated and are pin-compatible in 8-SOIC surface-mount applications.

Q: What is the primary reason to substitute the obsolete MAX4322ESA-T?

A: The MAX4322ESA-T carries Obsolete product status, indicating discontinued manufacturing and limited future availability. Substitution ensures long-term supply chain continuity and supports ongoing production requirements. Active alternatives from Microchip Technology and Texas Instruments provide equivalent or enhanced functionality with current manufacturing support.

Q: Are all substitute parts compatible with the original 8-SOIC package footprint?

A: Yes. All listed substitute parts use the 8-SOIC (0.154", 3.90mm Width) package. Pin-to-pin compatibility is maintained across all alternatives, allowing direct PCB footprint reuse without layout modifications.

Q: What is the difference between MCP6281 and MCP6283 series?

A: MCP6281 and MCP6283 share identical electrical specifications and performance parameters. Both are available in multiple packaging formats (Tube and Tape & Reel). Selection between these series should be based on packaging preference and inventory availability rather than functional differences.

Q: Do substitute parts support the full -40°C to 85°C operating temperature range of the original?

A: Yes. All listed substitute parts support minimum -40°C operation. Most extend the maximum operating temperature to 125°C, providing enhanced thermal margin. MCP601T-I/SN and OPA343UA/2K5 maintain the original -40°C to 85°C range. Verify specific application temperature requirements before final selection.

Q: What is the significance of Moisture Sensitivity Level (MSL) differences?

A: MSL 1 (Unlimited) indicates no moisture sensitivity restrictions and indefinite shelf life. MSL 2 (1 Year) requires controlled storage conditions and limits shelf life to one year from manufacturing. OPA343UA/2K5 and OPA364 series carry MSL 2 ratings. For applications with extended storage or high-humidity environments, MSL 1 parts (MCP and MAX series) are preferred.

Q: Can OPA364AID replace MAX4322ESA-T in all applications?

A: OPA364AID provides superior performance specifications (5 V/µs slew rate, 7 MHz bandwidth, 85 mA output current) and extended operating temperature (-40°C to 125°C). It is functionally compatible and pin-compatible in 8-SOIC packages. However, higher supply current (1.1 mA versus 725 µA) and MSL 2 moisture sensitivity should be evaluated against specific application constraints.

Q: Which substitute offers the lowest power consumption?

A: MCP601T-E/SN and MCP601T-I/SN provide the lowest supply current at 230 µA, representing 68% reduction compared to the original 725 µA. These are suitable for battery-powered or energy-constrained applications. Trade-off is reduced gain bandwidth product (2.8 MHz versus 5 MHz).

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 Compliant status and are REACH unaffected, meeting current environmental regulations for electronic component manufacturing and distribution.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message