MAX4314EEE Equivalent & Substitute Parts

Part Overview

The MAX4314EEE is a video amplifier with integrated 4:1 multiplexer-amplifier functionality, manufactured by Analog Devices Inc./Maxim Integrated. This linear amplifier IC is housed in a 16-QSOP surface mount package and delivers rail-to-rail output performance suitable for video signal processing applications.

The MAX4314EEE is classified as an obsolete product. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain reliability, and support long-term production requirements for systems utilizing this component.

Substiute Parts

MAX4314EEE

Analog Devices Inc./Maxim IntegratedIn Stock: 1022MAX4314EEE Datasheet

Current PartRFQ

MAX4314EEE+

Analog Devices Inc./Maxim IntegratedIn Stock: 989MAX4314EEE+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MAX4314EEE is determined by strict equivalence across the following critical parameters:

Electrical Performance Criteria:

• Bandwidth: 127 MHz
• Slew Rate: 430 V/µs
• Output Type: Rail-to-Rail
• Supply Current: 6.9 mA
• Output Current per Channel: 95 mA
• Supply Voltage Range: 4V ~ 10.5V (single), ±2V ~ 5.25V (dual)

Mechanical & Package Criteria:

• Package Type: 16-SSOP
• Package Dimensions: 0.154" width (3.90mm)
• Mounting: Surface Mount
• Number of Circuits: 1

Functional Criteria:

• Application: 4:1 Multiplexer-Amplifier
• Category: Linear Amplifiers

Substitute parts must match all electrical performance parameters, package specifications, and functional requirements. Packaging format (tube vs. other) does not affect electrical or mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

The MAX4314EEE+ is a direct functional and electrical equivalent to the MAX4314EEE. Both parts share identical electrical performance specifications, package dimensions, and mounting characteristics.

Key Differentiation:

The MAX4314EEE+ is classified as an active product, whereas the MAX4314EEE is obsolete. This distinction is significant for long-term supply chain planning and new design implementations.

The MAX4314EEE+ achieves ROHS3 compliance, whereas the MAX4314EEE is RoHS non-compliant. For applications subject to RoHS regulations or environmental compliance requirements, the MAX4314EEE+ is the appropriate selection.

Both parts are REACH Unaffected and carry the same ECCN (EAR99) and HTSUS (8542.33.0001) classifications.

For new designs, production ramp-up, or replacement of obsolete inventory, the MAX4314EEE+ is the recommended substitute. For legacy systems where RoHS compliance is not a requirement, both parts are electrically and mechanically interchangeable.

Frequently Asked Questions (FAQ)

Q: Can the MAX4314EEE+ be used as a direct replacement for the MAX4314EEE in existing designs?

A: Yes. The MAX4314EEE+ is electrically and mechanically identical to the MAX4314EEE. All electrical parameters, package dimensions, pin configurations, and functional specifications are equivalent. No circuit modifications are required.

Q: What is the primary reason to transition from MAX4314EEE to MAX4314EEE+?

A: The MAX4314EEE is an obsolete product with limited availability. The MAX4314EEE+ is an active product offering continued supply chain support. Additionally, the MAX4314EEE+ meets ROHS3 compliance standards, whereas the MAX4314EEE does not.

Q: Are there any differences in packaging format between these parts?

A: Both parts use the 16-SSOP package with identical dimensions (0.154" width, 3.90mm). The primary packaging difference is the delivery format: the MAX4314EEE+ is supplied in tube packaging. This does not affect electrical or mechanical compatibility.

Q: Do both parts have the same moisture sensitivity rating?

A: Yes. Both the MAX4314EEE and MAX4314EEE+ carry an MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions.

Q: Are there any supply voltage or current differences between these parts?

A: No. Both parts operate with identical supply voltage ranges (4V ~ 10.5V single, ±2V ~ 5.25V dual) and identical supply current specifications (6.9 mA).

Q: Which part should be selected for new product designs?

A: The MAX4314EEE+ should be selected for new designs. It is an active product with ongoing manufacturer support and meets current RoHS compliance requirements.