MAX4313EUA+ Equivalent & Substitute Parts Reference

Part Overview

The MAX4313EUA+ is a linear amplifier integrated circuit manufactured by Analog Devices Inc./Maxim Integrated, designed as a video amplifier with integrated 2:1 multiplexer-amplifier functionality. This component operates as a single-channel rail-to-rail output amplifier in an 8-pin surface mount package. The part is currently in active production status with 1127 units available in new original stock condition. Alternative equivalent parts are necessary when addressing supply chain constraints, regional availability requirements, or specific procurement specifications while maintaining identical electrical and mechanical performance characteristics.

Substiute Parts

MAX4313EUA+

Analog Devices Inc./Maxim IntegratedIn Stock: 1183MAX4313EUA+ Datasheet

Current PartRFQ

MAX4313EUA+

Analog Devices Inc./Maxim IntegratedIn Stock: 1183MAX4313EUA+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MAX4313EUA+ is determined by strict equivalence across the following critical parameters:

Electrical Performance Criteria:

• Bandwidth specification of 150 MHz (-3dB)
• Slew rate of 540 V/µs
• Supply current of 6.1 mA
• Output current capability of 95 mA per channel
• Supply voltage compatibility: 4V ~ 10.5V (single) or ±2V ~ 5.25V (dual)
• Rail-to-rail output configuration
• Single-circuit topology

Mechanical & Packaging Criteria:

• 8-pin surface mount package (8-TSSOP/8-MSOP)
• 0.118" width (3.00mm)
• 8-uMAX/uSOP supplier package designation

Compliance & Status Criteria:

• Active product status
• ROHS3 compliance
• MSL Level 1 rating
• REACH unaffected classification

Parts meeting all specified parameters within these categories qualify as direct equivalents. The MAX4313EUA+ currently represents the sole direct substitute within the provided dataset, indicating no alternative part numbers with identical specifications are available in the current inventory.

Parameter Comparison

Engineering Selection Recommendations

The MAX4313EUA+ is classified as an active product with full ROHS3 compliance and REACH unaffected status, confirming its suitability for current design implementations and regulatory compliance requirements. The component maintains MSL Level 1 rating, indicating unlimited shelf life under standard storage conditions without moisture sensitivity constraints.

Selection of this part for 2:1 multiplexer-amplifier applications requiring 150 MHz bandwidth and 540 V/µs slew rate performance is supported by its active production status and confirmed inventory availability of 1127 units in new original condition. The rail-to-rail output configuration and specified supply current characteristics ensure compatibility with both single-supply (4V ~ 10.5V) and dual-supply (±2V ~ 5.25V) circuit topologies.

No alternative equivalent parts with differing specifications are available within the current dataset. Component selection should proceed with the MAX4313EUA+ as the primary choice, with procurement planning based on the confirmed inventory level and active manufacturer status.

Frequently Asked Questions (FAQ)

Q: What defines a valid substitute for the MAX4313EUA+?

A: A valid substitute must match all electrical parameters (150 MHz bandwidth, 540 V/µs slew rate, 6.1 mA supply current, 95 mA output current, 4V ~ 10.5V / ±2V ~ 5.25V supply range), maintain rail-to-rail output configuration, use an 8-pin surface mount package (8-TSSOP/8-MSOP), and retain active product status with ROHS3 compliance.

Q: Are there alternative part numbers with identical specifications?

A: Based on the provided dataset, no alternative part numbers with identical electrical and mechanical specifications are currently available. The MAX4313EUA+ represents the sole option meeting all substitution criteria.

Q: What is the significance of the 8-uMAX/uSOP package designation?

A: The 8-uMAX/uSOP designation specifies the supplier device package format, which corresponds to the 8-TSSOP/8-MSOP physical package with 0.118" (3.00mm) width. This package type is essential for surface mount PCB assembly compatibility and cannot be substituted with alternative package formats.

Q: Does the MSL Level 1 rating affect component handling?

A: MSL Level 1 indicates unlimited moisture sensitivity, meaning the component does not require special moisture control measures during storage or handling. Standard warehouse conditions are acceptable without desiccant packaging or baking procedures.

Q: Can this amplifier operate in both single-supply and dual-supply configurations?

A: Yes. The MAX4313EUA+ supports both single-supply operation (4V ~ 10.5V) and dual-supply operation (±2V ~ 5.25V), providing design flexibility for different circuit topologies.

Q: What applications is the MAX4313EUA+ designed for?

A: The component is specified for 2:1 multiplexer-amplifier applications, particularly video amplification circuits requiring high bandwidth (150 MHz) and fast slew rate (540 V/µs) performance.

Q: Is the MAX4313EUA+ suitable for new designs?

A: Yes. Active product status confirms ongoing manufacturer support and availability for new design implementations. ROHS3 compliance ensures regulatory compliance for current and future applications.