MAX427CSA Equivalent & Substitute Parts

Part Overview

The MAX427CSA is a general purpose operational amplifier manufactured by Analog Devices Inc./Maxim Integrated, packaged in 8-SOIC surface mount configuration. This device is classified as obsolete product status, necessitating identification of active equivalent alternatives for new designs and ongoing production requirements. The MAX427CSA delivers 8 MHz gain bandwidth product with 2.8 V/µs slew rate, suitable for general purpose amplification applications requiring moderate bandwidth performance.

Key Parameters

Parameter	Value
Amplifier Type	General Purpose
Number of Circuits	1
Slew Rate	2.8 V/µs
Gain Bandwidth Product	8 MHz
Current - Input Bias	10 nA
Voltage - Input Offset	5 µV
Operating Temperature	0°C ~ 70°C
Package / Case	8-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
Product Status	Obsolete
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution eligibility for the MAX427CSA is determined by the following critical parameters: package compatibility (8-SOIC form factor), single circuit configuration, surface mount mounting type, and functional performance characteristics (slew rate and gain bandwidth product). The substitute parts identified maintain identical or superior electrical performance within the same physical package envelope, ensuring direct pin-compatible replacement capability.

The substitution logic groups parts into two categories based on performance alignment:

Category 1 - Performance-Matched Substitutes: OP27GSZ, OP27GSZ-REEL, and OP27GSZ-REEL7 maintain identical slew rate (2.8 V/µs) and gain bandwidth product (8 MHz) specifications, with enhanced input bias current and offset voltage characteristics. These parts operate across extended temperature range (-40°C ~ 85°C) and feature active product status with RoHS3 compliance.

Category 2 - Reduced-Performance Substitute: OP07CS8#PBF provides lower slew rate (0.25 V/µs) and reduced gain bandwidth product (600 kHz), suitable only for applications not requiring the full bandwidth performance of the original device. This part features superior input bias current (1.8 nA) and active product status with RoHS3 compliance.

Parameter Comparison

Parameter	MAX427CSA	OP07CS8#PBF	OP27GSZ	OP27GSZ-REEL	OP27GSZ-REEL7
Manufacturer	Analog Devices Inc./Maxim Integrated	Analog Devices Inc.	Analog Devices Inc.	Analog Devices Inc.	Analog Devices Inc.
Amplifier Type	General Purpose	General Purpose	General Purpose	General Purpose	General Purpose
Number of Circuits	1	1	1	1	1
Slew Rate	2.8 V/µs	0.25 V/µs	2.8 V/µs	2.8 V/µs	2.8 V/µs
Gain Bandwidth Product	8 MHz	600 kHz	8 MHz	8 MHz	8 MHz
Current - Input Bias	10 nA	1.8 nA	15 nA	15 nA	15 nA
Voltage - Input Offset	5 µV	60 µV	30 µV	30 µV	30 µV
Operating Temperature	0°C ~ 70°C	0°C ~ 70°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C
Package / Case	8-SOIC (0.154", 3.90mm Width)	8-SOIC (0.154", 3.90mm Width)	8-SOIC (0.154", 3.90mm Width)	8-SOIC (0.154", 3.90mm Width)	8-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Product Status	Obsolete	Active	Active	Active	Active
RoHS Status	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Packaging Type	-	Tube	Tube	Cut Tape (CT) & Digi-Reel®	Cut Tape (CT) & Digi-Reel®

Engineering Selection Recommendations

Primary Recommendation - OP27GSZ, OP27GSZ-REEL, OP27GSZ-REEL7:

These three variants represent the optimal substitutes for MAX427CSA applications. All three maintain identical electrical performance specifications (2.8 V/µs slew rate, 8 MHz gain bandwidth product) with pin-compatible 8-SOIC packaging. The OP27 series offers active product status, ensuring long-term availability and supply chain stability. RoHS3 compliance satisfies modern regulatory requirements, addressing the non-compliance status of the obsolete MAX427CSA. The extended operating temperature range (-40°C ~ 85°C) provides superior thermal performance compared to the original device (0°C ~ 70°C).

Selection between OP27GSZ, OP27GSZ-REEL, and OP27GSZ-REEL7 depends on packaging and supply chain requirements. OP27GSZ is supplied in tube packaging. OP27GSZ-REEL and OP27GSZ-REEL7 are supplied in cut tape with Digi-Reel® format, with OP27GSZ-REEL7 offering higher inventory availability (50,100 pcs vs. 44,113 pcs).

Secondary Recommendation - OP07CS8#PBF:

The OP07CS8#PBF serves as an alternative only for applications where reduced bandwidth performance is acceptable. This part delivers significantly lower slew rate (0.25 V/µs) and gain bandwidth product (600 kHz), representing approximately 3% and 7.5% of the original device specifications respectively. The OP07CS8#PBF features superior input bias current (1.8 nA) and active product status with RoHS3 compliance. This substitute is suitable for low-frequency signal conditioning, precision DC amplification, and instrumentation applications where bandwidth requirements do not exceed 600 kHz.

Frequently Asked Questions (FAQ)

Q: Can OP27GSZ directly replace MAX427CSA in existing designs?

A: Yes. The OP27GSZ maintains identical pin configuration within the 8-SOIC package and delivers matching electrical performance (2.8 V/µs slew rate, 8 MHz gain bandwidth product). Direct substitution is supported without circuit modification.

Q: What is the primary difference between OP27GSZ, OP27GSZ-REEL, and OP27GSZ-REEL7?

A: All three variants are electrically identical. The differences are packaging format and supply method. OP27GSZ is supplied in tube packaging. OP27GSZ-REEL and OP27GSZ-REEL7 are supplied in cut tape with Digi-Reel® format. Selection depends on assembly equipment compatibility and procurement requirements.

Q: Why is OP07CS8#PBF listed as a substitute if it has lower bandwidth?

A: OP07CS8#PBF is included as a substitute option for applications where the full 8 MHz bandwidth of MAX427CSA is not required. The 600 kHz gain bandwidth product of OP07CS8#PBF is sufficient for low-frequency and DC-coupled applications. This part should only be selected when bandwidth requirements are confirmed to be below 600 kHz.

Q: Does the extended temperature range of OP27 series affect compatibility?

A: No. The OP27 series extended operating temperature range (-40°C ~ 85°C) is a performance enhancement compared to MAX427CSA (0°C ~ 70°C). Applications operating within the original 0°C ~ 70°C range experience no compatibility issues. Applications requiring operation below 0°C or above 70°C benefit from the expanded range.

Q: What is the significance of RoHS3 compliance for substitute selection?

A: RoHS3 compliance indicates the substitute parts meet current environmental and regulatory standards. The MAX427CSA is RoHS non-compliant, reflecting its obsolete status. All recommended substitutes (OP07CS8#PBF, OP27GSZ, OP27GSZ-REEL, OP27GSZ-REEL7) are RoHS3 compliant, supporting compliance requirements for new designs and production.

Q: Are there inventory considerations when selecting between substitute options?

A: Yes. OP27GSZ-REEL7 offers the highest inventory availability (50,100 pcs), followed by OP27GSZ-REEL (44,113 pcs), OP27GSZ (55,200 pcs), and OP07CS8#PBF (1,001 pcs). For high-volume production, OP27GSZ-REEL7 or OP27GSZ provide superior supply assurance.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message