MAX4257ESA Equivalent & Substitute Parts

Part Overview

The MAX4257ESA is a general-purpose operational amplifier manufactured by Analog Devices Inc./Maxim Integrated, configured as a dual-channel (2 circuit) device in an 8-SOIC surface-mount package. This device features push-pull, rail-to-rail output architecture and is designed for low-power analog signal processing applications. The MAX4257ESA is currently classified as obsolete, necessitating identification of active equivalent and substitute components that maintain functional compatibility within specified electrical and mechanical parameters.

Key Parameters

Parameter	Value	Unit
Amplifier Type	General Purpose	—
Number of Circuits	2	—
Output Type	Push-Pull, Rail-to-Rail	—
Slew Rate	2.1	V/µs
Gain Bandwidth Product	22	MHz
Current - Input Bias	0.1	pA
Voltage - Input Offset	70	µV
Current - Supply (x2 Channels)	420	µA
Current - Output / Channel	68	mA
Voltage - Supply Span (Min)	2.4	V
Voltage - Supply Span (Max)	5.5	V
Operating Temperature	-40 to 85	°C
Package / Case	8-SOIC (0.154", 3.90mm Width)	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution compatibility for the MAX4257ESA is determined by the following critical parameters:

Primary Compatibility Criteria:

Dual-channel (2 circuit) configuration
8-SOIC surface-mount package (0.154", 3.90mm width)
Rail-to-rail output capability
Supply voltage range overlap: minimum 2.4 V to 5.5 V maximum
Operating temperature range: -40°C to 85°C minimum coverage

Secondary Performance Criteria:

Slew rate ≥ 2.1 V/µs (or application-specific tolerance)
Gain bandwidth product ≥ 22 MHz (or application-specific tolerance)
Input bias current ≤ 0.1 pA (or application-specific tolerance)
Output current per channel ≥ 68 mA (or application-specific tolerance)

Substitute parts are grouped into two categories:

Category 1: Direct Functional Equivalents Parts that maintain identical or superior electrical performance across all critical parameters while preserving the 8-SOIC package footprint. These include MAX4257ESA+ (active variant with tube packaging) and LTC6241IS8#PBF (CMOS architecture with enhanced slew rate and bandwidth).

Category 2: Functional Alternatives Parts that satisfy core substitution requirements (dual-channel, 8-SOIC, rail-to-rail, supply range compatibility) but with trade-offs in specific performance metrics. These include LMV358M/NOPB, LMV358MX/NOPB, OPA2350UA, TLC4502 variants, and BU7442 variants.

Parameter Comparison

Part Number	Manufacturer	Amplifier Type	Slew Rate (V/µs)	GBW (MHz)	Input Bias (pA)	Input Offset (µV)	Supply Current (µA)	Output Current (mA)	Supply Min (V)	Supply Max (V)	Temp Range (°C)	Package	Status
MAX4257ESA	Analog Devices	General Purpose	2.1	22	0.1	70	420	68	2.4	5.5	-40 to 85	8-SOIC	Obsolete
MAX4257ESA+	Analog Devices	General Purpose	2.1	22	0.1	70	420	68	2.4	5.5	-40 to 85	8-SOIC	Active
LTC6241IS8#PBF	Analog Devices	CMOS	10	18	0.5	100	2500	30	2.8	6	-40 to 85	8-SOIC	Active
LMV358M/NOPB	Texas Instruments	General Purpose	1	1	15000	1700	210	160	2.7	5.5	-40 to 125	8-SOIC	Active
LMV358MX/NOPB	Texas Instruments	General Purpose	1	1	15000	1700	210	160	2.7	5.5	-40 to 125	8-SOIC	Active
OPA2350UA	Texas Instruments	CMOS	22	38	0.5	150	5200	40	2.7	5.5	-40 to 85	8-SOIC	Active
TLC4502ACD	Texas Instruments	CMOS	2.5	4.7	1	10	2500	50	4	6	0 to 70	8-SOIC	Active
TLC4502ACDR	Texas Instruments	CMOS	2.5	4.7	1	10	2500	50	4	6	0 to 70	8-SOIC	Active
TLC4502AID	Texas Instruments	CMOS	2.5	4.7	1	10	2500	50	4	6	-40 to 125	8-SOIC	Active
BU7442F-E2	Rohm Semiconductor	CMOS	0.3	0.6	1	1000	100	10	1.7	5.5	-40 to 85	8-SOIC	Active
BU7442SF-E2	Rohm Semiconductor	CMOS	0.3	0.6	1	1000	100	10	1.7	5.5	-40 to 105	8-SOIC	Active

Engineering Selection Recommendations

Tier 1: Direct Replacement (Identical Electrical Performance)

MAX4257ESA+ is the primary direct replacement. This part maintains identical electrical specifications to the obsolete MAX4257ESA while offering active product status. The only difference is packaging format (tube vs. original packaging). This substitution requires no circuit redesign and is suitable for all applications previously using MAX4257ESA.

Tier 2: High-Performance Substitutes (Enhanced Specifications)

LTC6241IS8#PBF and OPA2350UA provide superior performance characteristics while maintaining 8-SOIC package compatibility and rail-to-rail output. Both parts exceed the original slew rate and gain bandwidth product specifications. LTC6241IS8#PBF offers 10 V/µs slew rate and 18 MHz bandwidth. OPA2350UA provides 22 V/µs slew rate and 38 MHz bandwidth. These substitutes are suitable for applications requiring higher speed performance within the same form factor.

Tier 3: Functional Alternatives (Trade-off Substitutes)

LMV358M/NOPB and LMV358MX/NOPB are general-purpose amplifiers with extended operating temperature range (-40°C to 125°C). These parts sacrifice slew rate (1 V/µs) and bandwidth (1 MHz) but offer superior output current capability (160 mA per channel) and lower supply current (210 µA). Suitable for low-speed, high-current output applications.

TLC4502 variants (ACD, ACDR, AID) provide moderate performance with slew rate of 2.5 V/µs and 4.7 MHz bandwidth. TLC4502AID extends operating temperature to -40°C to 125°C. These parts are suitable for applications with moderate speed requirements and extended temperature operation.

Tier 4: Limited Compatibility Substitutes

BU7442F-E2 and BU7442SF-E2 offer minimal performance specifications (0.3 V/µs slew rate, 600 kHz bandwidth, 10 mA output current) and are suitable only for ultra-low-speed, low-power applications. Supply voltage minimum of 1.7 V provides extended low-voltage capability. Not recommended for applications requiring the original performance envelope.

Compliance and Certification:

All substitute parts listed maintain ROHS3 compliance and REACH unaffected status, matching the original MAX4257ESA certification profile. Moisture sensitivity levels are consistent (MSL 1 or MSL 2) across all options. All parts are classified as surface-mount devices in 8-SOIC packages suitable for automated assembly.

Frequently Asked Questions (FAQ)

Q1: Can MAX4257ESA+ be used as a direct drop-in replacement for MAX4257ESA?

A: Yes. MAX4257ESA+ is electrically and mechanically identical to MAX4257ESA. The only difference is packaging format (tube packaging vs. original). Both parts feature identical electrical specifications: 2.1 V/µs slew rate, 22 MHz gain bandwidth product, 68 mA output current per channel, and -40°C to 85°C operating temperature. No circuit modifications are required.

Q2: What are the key differences between LTC6241IS8#PBF and the original MAX4257ESA?

A: LTC6241IS8#PBF is a CMOS amplifier with enhanced performance: 10 V/µs slew rate (vs. 2.1 V/µs), 18 MHz bandwidth (vs. 22 MHz), and significantly lower supply current (2.5 mA vs. 420 µA). Input bias current is higher (0.5 pA vs. 0.1 pA). Output current is lower (30 mA vs. 68 mA). The 8-SOIC package footprint is identical. Suitable for applications requiring higher speed operation and lower power consumption.

Q3: Why would I choose LMV358M/NOPB over MAX4257ESA?

A: LMV358M/NOPB offers extended operating temperature range (-40°C to 125°C vs. -40°C to 85°C) and superior output current capability (160 mA per channel vs. 68 mA). However, it sacrifices speed performance: 1 V/µs slew rate and 1 MHz bandwidth versus 2.1 V/µs and 22 MHz. This substitute is appropriate for low-frequency, high-current applications requiring extended temperature operation.

Q4: Are all substitute parts available in 8-SOIC package?

A: Yes. All substitute parts listed are available in 8-SOIC surface-mount packages with 0.154" (3.90mm) width, maintaining identical PCB footprint compatibility with MAX4257ESA. Package dimensions are preserved across all substitutes, enabling direct board-level replacement without layout modifications.

Q5: What is the supply voltage compatibility range for substitutes?

A: The original MAX4257ESA operates from 2.4 V to 5.5 V. Most substitutes maintain this range or extend it. LTC6241IS8#PBF extends to 6 V maximum. LMV358 variants operate from 2.7 V to 5.5 V. TLC4502 variants require minimum 4 V supply. BU7442 variants operate from 1.7 V to 5.5 V. Verify supply voltage compatibility with your application before selection.

Q6: Which substitute offers the best performance match to MAX4257ESA?

A: MAX4257ESA+ provides identical electrical performance and is the best functional match. For enhanced performance within the same package, OPA2350UA offers superior slew rate (22 V/µs) and bandwidth (38 MHz) while maintaining rail-to-rail output and 8-SOIC package. For applications requiring the original performance envelope without enhancement, MAX4257ESA+ is the recommended choice.

Q7: Do all substitutes maintain RoHS3 compliance?

A: Yes. All substitute parts listed are RoHS3 compliant and REACH unaffected, matching the original MAX4257ESA certification status. Moisture sensitivity levels are MSL 1 (unlimited) or MSL 2 (1 year), suitable for standard PCB assembly processes.

Q8: What is the inventory status of substitute parts?

A: MAX4257ESA+ (2000 pcs), LTC6241IS8#PBF (2100 pcs), LMV358M/NOPB (1898 pcs), LMV358MX/NOPB (155100 pcs), OPA2350UA (16535 pcs), TLC4502ACD (928 pcs), TLC4502ACDR (8140 pcs), TLC4502AID (5000200 pcs), BU7442F-E2 (1012 pcs), and BU7442SF-E2 (5660 pcs) are currently in stock. LMV358MX/NOPB and TLC4502AID offer the highest inventory availability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message