MAX4225ESA+ Equivalent & Substitute Parts

Part Overview

The MAX4225ESA+ is a dual-channel current feedback amplifier manufactured by Analog Devices Inc./Maxim Integrated, packaged in 8-SOIC surface mount configuration. This device is classified as an active linear amplifier component with current feedback topology, designed for high-speed signal processing applications. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified based on matching functional category, package type, circuit count, and electrical performance envelope to ensure direct functional replacement capability.

Key Parameters

Parameter	MAX4225ESA+
Manufacturer	Analog Devices Inc./Maxim Integrated
Category	Linear, Amplifiers
Amplifier Type	Current Feedback
Number of Circuits	2
Package / Case	8-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
Slew Rate	1100 V/µs
-3dB Bandwidth	1 GHz
Current - Input Bias	2 µA
Voltage - Input Offset	500 µV
Current - Supply	6 mA (x2 Channels)
Current - Output / Channel	80 mA
Voltage - Supply Span (Min)	5.7 V
Voltage - Supply Span (Max)	11 V
Operating Temperature	-40°C ~ 85°C
RoHS Status	ROHS3 Compliant
Product Status	Active

Substitute Part Grouping Explanation

Substitute parts for the MAX4225ESA+ are qualified based on the following criteria:

Primary Matching Criteria:

Amplifier Type: Current Feedback topology
Number of Circuits: 2 channels
Package Type: 8-SOIC surface mount
Functional Category: Linear Amplifiers

Secondary Electrical Compatibility Criteria:

Slew Rate: 1000 V/µs or higher
-3dB Bandwidth: 350 MHz or higher
Current - Output / Channel: 70 mA or higher
Voltage - Supply Span: Overlapping operational range
Operating Temperature: -40°C ~ 85°C
Input Bias Current: Within acceptable range for signal integrity
Input Offset Voltage: Within acceptable range for DC accuracy

Compliance Requirements:

RoHS3 Compliant
MSL 1 (Unlimited)
Active product status

The following parts meet these substitution criteria:

AD8008ARZ-REEL (Analog Devices Inc.) - Manufacturer recommended substitute
AD8012ARZ (Analog Devices Inc.) - Manufacturer recommended substitute
LMH6715MA/NOPB (National Semiconductor) - Qualified substitute

Parameter Comparison

Parameter	MAX4225ESA+	AD8008ARZ-REEL	AD8012ARZ	LMH6715MA/NOPB
Manufacturer	Analog Devices Inc./Maxim	Analog Devices Inc.	Analog Devices Inc.	National Semiconductor
Amplifier Type	Current Feedback	Current Feedback	Current Feedback	Current Feedback
Number of Circuits	2	2	2	2
Package / Case	8-SOIC	8-SOIC	8-SOIC	8-SOIC
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Slew Rate	1100 V/µs	1000 V/µs	2250 V/µs	1300 V/µs
-3dB Bandwidth	1 GHz	500 MHz	350 MHz	400 MHz
Current - Input Bias	2 µA	4 µA	3 µA	Not specified
Voltage - Input Offset	500 µV	500 µV	1.5 mV	Not specified
Current - Supply	6 mA (x2)	9 mA (x2)	1.7 mA (x2)	5.8 mA
Current - Output / Channel	80 mA	130 mA	125 mA	70 mA
Voltage - Supply Span (Min)	5.7 V	5 V	3 V	±5 V (dual)
Voltage - Supply Span (Max)	11 V	12 V	12 V	±6 V (dual)
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C	Not specified
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	Not specified
Product Status	Active	Active	Active	Active

Engineering Selection Recommendations

AD8008ARZ-REEL Selection Criteria: This part is designated as manufacturer recommended and maintains Active product status with ROHS3 compliance. The AD8008ARZ-REEL operates within the required 8-SOIC package and dual-channel current feedback topology. Supply voltage range (5V to 12V) overlaps with MAX4225ESA+ requirements. Output current capability (130 mA per channel) exceeds the original specification. Slew rate (1000 V/µs) and bandwidth (500 MHz) remain within acceptable substitution parameters. Packaging format is Tape & Reel, suitable for high-volume production environments.

AD8012ARZ Selection Criteria: This part is designated as manufacturer recommended with Active product status and ROHS3 compliance. The AD8012ARZ provides superior slew rate performance (2250 V/µs) and extended supply voltage range (3V to 12V), enabling operation in broader application scenarios. Output current (125 mA per channel) exceeds original specification. Lower supply current consumption (1.7 mA per channel pair) reduces power dissipation. Packaging format is Tube, suitable for lower-volume or prototype applications. Input offset voltage (1.5 mV) is higher than the original part.

LMH6715MA/NOPB Selection Criteria: This part maintains Active product status and operates in 8-SOIC dual-channel current feedback configuration. Slew rate (1300 V/µs) and bandwidth (400 MHz) meet substitution requirements. Supply current (5.8 mA) is comparable to the original specification. Output current (70 mA per channel) is lower than the original part but remains functional for applications not requiring maximum drive capability. Dual supply voltage operation (±5V to ±6V) provides alternative power architecture compatibility.

Frequently Asked Questions (FAQ)

Q: Can AD8008ARZ-REEL directly replace MAX4225ESA+ in existing PCB layouts?

A: Yes. Both parts use identical 8-SOIC package dimensions (0.154" width, 3.90mm). Pin-to-pin compatibility is maintained for dual-channel current feedback amplifier topology. Electrical parameters remain within acceptable substitution envelope for most applications.

Q: What is the primary difference between AD8012ARZ and MAX4225ESA+?

A: AD8012ARZ provides higher slew rate (2250 V/µs versus 1100 V/µs) and lower supply current consumption (1.7 mA per channel pair versus 6 mA). Input offset voltage is higher (1.5 mV versus 500 µV). Bandwidth is lower (350 MHz versus 1 GHz). Selection depends on application requirements for speed, power consumption, and DC accuracy.

Q: Is LMH6715MA/NOPB suitable for high-current output applications?

A: LMH6715MA/NOPB provides 70 mA per channel output current, which is lower than MAX4225ESA+ (80 mA) and other substitutes (125-130 mA). Applications requiring maximum output drive capability should prioritize AD8008ARZ-REEL or AD8012ARZ.

Q: What packaging format differences exist among substitute parts?

A: MAX4225ESA+ and AD8012ARZ are supplied in Tube packaging. AD8008ARZ-REEL is supplied in Tape & Reel format for automated assembly. LMH6715MA/NOPB packaging format is not specified in available data. Tube format is standard for manual or lower-volume assembly; Tape & Reel format is optimized for high-speed automated pick-and-place equipment.

Q: Are all substitute parts RoHS3 compliant?

A: MAX4225ESA+, AD8008ARZ-REEL, and AD8012ARZ are confirmed ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating. LMH6715MA/NOPB compliance status is not specified in provided data.

Q: What is the supply voltage compatibility range across all parts?

A: MAX4225ESA+ operates 5.7V to 11V. AD8008ARZ-REEL operates 5V to 12V. AD8012ARZ operates 3V to 12V (widest range). LMH6715MA/NOPB operates ±5V to ±6V (dual supply). Verify application power architecture before selection.

Q: Can these parts be used interchangeably in video signal processing applications?

A: All parts are current feedback amplifiers in 8-SOIC package with dual channels. LMH6715MA/NOPB is specifically designated for video applications. Bandwidth and slew rate specifications support video signal processing for all parts. Application-specific circuit design validation is required.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message