MAX4215ESA Equivalent & Substitute Parts

Part Overview

The MAX4215ESA is a buffer amplifier integrated circuit manufactured by Analog Devices Inc./Maxim Integrated, designed for rail-to-rail signal buffering applications. This device features a single amplifier circuit in an 8-SOIC surface mount package with a slew rate of 600V/µs and -3dB bandwidth of 230 MHz. The MAX4215ESA is classified as obsolete, making equivalent and substitute parts necessary for new designs and ongoing production requirements. Substitute parts must maintain compatibility with the original electrical specifications and physical package dimensions while offering active product status and improved compliance certifications.

Key Parameters

Parameter	Value	Unit
Amplifier Type	Buffer	—
Number of Circuits	1	—
Output Type	Rail-to-Rail	—
Slew Rate	600	V/µs
-3dB Bandwidth	230	MHz
Current - Input Bias	5.4	µA
Voltage - Input Offset	4	mV
Current - Supply	5.5	mA
Current - Output / Channel	120	mA
Voltage - Supply Span (Min)	3.15	V
Voltage - Supply Span (Max)	11	V
Operating Temperature	-40 to 85	°C
Package / Case	8-SOIC (0.154", 3.90mm Width)	—
Mounting Type	Surface Mount	—
Product Status	Obsolete	—

Substitute Part Grouping Explanation

Substitute parts for the MAX4215ESA are evaluated based on strict electrical and mechanical compatibility criteria. The primary substitution logic is organized into two categories:

Direct Package and Electrical Match: The MAX4215ESA+ represents a direct functional equivalent with identical electrical specifications and 8-SOIC package dimensions. This part maintains the same amplifier type (buffer), output configuration (rail-to-rail), slew rate (600V/µs), bandwidth (230 MHz), and supply voltage range (3.15V to 11V). The key differentiator is product status: MAX4215ESA+ is active and RoHS3 compliant, addressing the obsolescence of the original part.

Alternative Amplifier Topologies: The THS4500ID, THS4501IDR, and THS4501CD are differential amplifiers from Texas Instruments that share the 8-SOIC package footprint and compatible supply voltage ranges. These parts feature enhanced performance characteristics including higher slew rates (2800V/µs) and greater bandwidth (370 MHz). The ALD1701GSAL from Advanced Linear Devices is a general-purpose amplifier with rail-to-rail output and 8-SOIC packaging, though with reduced performance specifications.

Critical Parameters for Substitution:

Package / Case: 8-SOIC (0.154", 3.90mm Width)
Mounting Type: Surface Mount
Output Type: Rail-to-Rail
Voltage - Supply Span: Minimum 3.15V, Maximum 11V (or compatible range)
Number of Circuits: 1
Current - Output / Channel: 120 mA (or greater)

Parameter Comparison

Parameter	MAX4215ESA	MAX4215ESA+	THS4500ID	THS4501IDR	THS4501CD	ALD1701GSAL
Amplifier Type	Buffer	Buffer	Differential	Differential	Differential	General Purpose
Number of Circuits	1	1	1	1	1	1
Output Type	Rail-to-Rail	Rail-to-Rail	Differential	Differential	Differential	Rail-to-Rail
Slew Rate (V/µs)	600	600	2800	2800	2800	1
-3dB Bandwidth (MHz)	230	230	370	370	370	—
Current - Input Bias (µA)	5.4	5.4	4	4	4	0.001
Voltage - Input Offset (mV)	4	4	4	4	4	10
Current - Supply (mA)	5.5	5.5	23	23	23	0.12
Current - Output / Channel (mA)	120	120	120	120	120	1
Voltage - Supply Span Min (V)	3.15	3.15	4.5	4.5	4.5	2
Voltage - Supply Span Max (V)	11	11	15	15	15	12
Operating Temperature (°C)	-40 to 85	-40 to 85	-40 to 85	-40 to 85	0 to 70	0 to 70
Package / Case	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC	8-SOIC
Product Status	Obsolete	Active	Active	Active	Active	Active
RoHS Status	Non-compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

For Direct Replacement (Identical Electrical Function): The MAX4215ESA+ is the primary recommended substitute. This part maintains 100% electrical compatibility with the original MAX4215ESA, including identical slew rate (600V/µs), bandwidth (230 MHz), supply voltage range (3.15V to 11V), and output current capability (120 mA). The MAX4215ESA+ is active in production status and RoHS3 compliant, eliminating obsolescence concerns. The 8-SOIC package dimensions are identical, requiring no PCB layout modifications. This substitution is suitable for all applications where the original MAX4215ESA was specified.

For Performance-Enhanced Applications: The THS4500ID and THS4501IDR from Texas Instruments offer superior performance characteristics with slew rates of 2800V/µs and bandwidth of 370 MHz. These differential amplifiers are suitable for applications requiring higher speed performance while maintaining the same 8-SOIC package footprint and 120 mA output current. Both parts are active and RoHS3 compliant. The THS4501IDR is supplied in Tape & Reel packaging, suitable for high-volume production. The THS4501CD variant operates within a reduced temperature range (0°C to 70°C) compared to the extended range (-40°C to 85°C) of the original part.

For Low-Power Applications: The ALD1701GSAL from Advanced Linear Devices provides a rail-to-rail general-purpose amplifier with significantly reduced supply current (120 µA versus 5.5 mA) and minimal input bias current (1 pA). This part is suitable for battery-powered or low-power applications where the original buffer amplifier specifications exceed system requirements. The ALD1701GSAL operates within a 0°C to 70°C temperature range and 2V to 12V supply span, with reduced output current capability (1 mA).

Compliance and Certification: All recommended substitute parts are RoHS3 compliant and REACH unaffected, meeting modern environmental and regulatory requirements. The MAX4215ESA+ is the preferred choice for direct replacement in existing designs. Alternative topologies (THS4500ID, THS4501IDR, THS4501CD) require circuit evaluation to confirm compatibility with differential amplifier configurations.

Frequently Asked Questions (FAQ)

Q: Can the MAX4215ESA+ be used as a direct drop-in replacement for the MAX4215ESA?

A: Yes. The MAX4215ESA+ is electrically and mechanically identical to the MAX4215ESA. Both parts feature the same 8-SOIC package dimensions (0.154" width, 3.90mm), identical electrical specifications (600V/µs slew rate, 230 MHz bandwidth, 5.5 mA supply current, 120 mA output current), and compatible supply voltage range (3.15V to 11V). No circuit modifications or PCB layout changes are required. The primary difference is product status: MAX4215ESA+ is active and RoHS3 compliant, while the original is obsolete.

Q: What is the key difference between the MAX4215ESA and the THS4500ID?

A: The MAX4215ESA is a buffer amplifier with rail-to-rail output, while the THS4500ID is a differential amplifier with differential output. The THS4500ID offers enhanced performance with a slew rate of 2800V/µs (versus 600V/µs) and bandwidth of 370 MHz (versus 230 MHz). Both parts share the same 8-SOIC package and 120 mA output current capability. The THS4500ID requires a minimum supply voltage of 4.5V (versus 3.15V for the MAX4215ESA) and consumes 23 mA supply current (versus 5.5 mA). Substitution is appropriate only for applications where differential amplifier topology is acceptable.

Q: Is the ALD1701GSAL suitable for high-current output applications?

A: No. The ALD1701GSAL provides only 1 mA output current per channel, compared to 120 mA for the MAX4215ESA. This part is designed for low-power, general-purpose amplification and is not suitable for applications requiring the 120 mA output current capability of the original buffer amplifier. The ALD1701GSAL is appropriate only for signal conditioning and low-current buffering applications.

Q: What packaging options are available for substitute parts?

A: All substitute parts are available in 8-SOIC surface mount packages with identical physical dimensions (0.154" width, 3.90mm). The MAX4215ESA+ is supplied in Tube packaging. The THS4500ID and THS4501CD are supplied in Tube packaging. The THS4501IDR is supplied in Tape & Reel (TR) packaging, suitable for automated assembly and high-volume production. The ALD1701GSAL is supplied in Tube packaging. Package selection should be based on production volume and assembly requirements.

Q: Are there temperature range considerations when selecting a substitute?

A: Yes. The MAX4215ESA and MAX4215ESA+ operate across an extended temperature range of -40°C to 85°C. The THS4500ID and THS4501IDR also support this extended range. The THS4501CD and ALD1701GSAL operate within a reduced range of 0°C to 70°C. Applications requiring operation below 0°C or above 70°C must use the MAX4215ESA+, THS4500ID, or THS4501IDR.

Q: What is the supply voltage compatibility for each substitute part?

A: The MAX4215ESA and MAX4215ESA+ operate with supply voltages from 3.15V to 11V. The THS4500ID, THS4501IDR, and THS4501CD require supply voltages from 4.5V to 15V, limiting use in applications with supply voltages below 4.5V. The ALD1701GSAL operates from 2V to 12V, providing the widest supply voltage range. Verify that the selected substitute part's supply voltage range is compatible with your application's power supply specifications.

Q: Can the THS4501CD be used in applications requiring -40°C operation?

A: No. The THS4501CD operates within a temperature range of 0°C to 70°C and is not rated for operation below 0°C. Applications requiring extended temperature operation to -40°C must use the MAX4215ESA+, THS4500ID, or THS4501IDR.

Q: What are the RoHS compliance differences between the original and substitute parts?

A: The MAX4215ESA is RoHS non-compliant. All substitute parts (MAX4215ESA+, THS4500ID, THS4501IDR, THS4501CD, and ALD1701GSAL) are RoHS3 compliant. For applications subject to RoHS regulations or customer requirements, any of the substitute parts satisfy compliance requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message