MAX4133ESD Equivalent & Substitute Parts

Part Overview

The MAX4133ESD is a general-purpose operational amplifier manufactured by Analog Devices Inc./Maxim Integrated, configured as a dual-channel (2 circuit) rail-to-rail amplifier in a 14-SOIC surface mount package. This device is classified as obsolete, making identification of functionally equivalent substitute components essential for design continuity and procurement planning. The MAX4133ESD operates across a 2.7V to 6.5V supply range with a 4V/µs slew rate and 10 MHz gain bandwidth product, suitable for general-purpose amplification applications requiring moderate performance specifications.

Substiute Parts

MAX4133ESD

Analog Devices Inc./Maxim IntegratedIn Stock: 827MAX4133ESD Datasheet

Current PartRFQ

TLV2453CD

Texas InstrumentsIn Stock: 803TLV2453CD Datasheet

MFR RecommendedRFQ

TLV2453CDR

Texas InstrumentsIn Stock: 776TLV2453CDR Datasheet

MFR RecommendedRFQ

TLV2463AIDR

Texas InstrumentsIn Stock: 712TLV2463AIDR Datasheet

MFR RecommendedRFQ

TLV2463CDR

Texas InstrumentsIn Stock: 2224TLV2463CDR Datasheet

MFR RecommendedRFQ

TLV2463ID

Texas InstrumentsIn Stock: 1231TLV2463ID Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MAX4133ESD is determined by strict alignment of electrical and mechanical parameters within the general-purpose dual-channel operational amplifier category. The following criteria establish valid substitution relationships:

Primary Compatibility Criteria:

• Dual-channel (2 circuit) configuration
• Rail-to-rail output capability
• 14-SOIC surface mount package (0.154", 3.90mm Width)
• Supply voltage range overlap with original specification (minimum 2.7V, maximum ≥6V)
• Operating temperature range compatibility or extension

Electrical Performance Parameters:

• Slew rate, gain bandwidth product, input bias current, input offset voltage, supply current, and output current per channel are secondary selection factors that determine performance suitability within the application context

The substitute parts identified (TLV2453CD, TLV2453CDR, TLV2463AIDR, TLV2463CDR, TLV2463ID) all satisfy the primary compatibility criteria. Texas Instruments TLV series components provide functional equivalence through matching package geometry, channel count, and rail-to-rail output architecture.

Parameter Comparison

Engineering Selection Recommendations

Active Product Status Priority: TLV2453CDR, TLV2463AIDR, TLV2463CDR, and TLV2463ID are classified as active products with ongoing manufacturer support and availability. These components are preferred for new designs and long-term procurement planning. TLV2453CD and the original MAX4133ESD are both obsolete and should be replaced in active production environments.

RoHS Compliance Consideration: All Texas Instruments substitute parts (TLV2453CD, TLV2453CDR, TLV2463AIDR, TLV2463CDR, TLV2463ID) are ROHS3 compliant, whereas the MAX4133ESD is RoHS non-compliant. For applications subject to RoHS regulations or customer requirements, substitution with any TLV series component satisfies compliance mandates.

Temperature Range Alignment: The MAX4133ESD operates from -40°C to 85°C. TLV2463AIDR and TLV2463ID extend the upper temperature limit to 125°C, providing enhanced thermal margin for demanding environments. TLV2453CD and TLV2453CDR operate within 0°C to 70°C, which does not cover the full original temperature range. TLV2463CDR operates 0°C to 70°C. Applications requiring the full -40°C to 85°C range should select TLV2463AIDR or TLV2463ID.

Supply Voltage Compatibility: The MAX4133ESD maximum supply voltage is 6.5V. All substitute parts operate to 6V maximum. Applications requiring operation above 6V are not compatible with any identified substitute.

Packaging and Procurement Format: TLV2453CDR, TLV2463AIDR, and TLV2463CDR are supplied in Tape & Reel format, suitable for automated assembly. TLV2453CD and TLV2463ID are supplied in Tube format, suitable for manual or lower-volume assembly. Packaging selection depends on production volume and assembly methodology.

Frequently Asked Questions (FAQ)

Q: Can TLV2453CD directly replace MAX4133ESD in all applications?

A: TLV2453CD provides mechanical and functional compatibility through identical 14-SOIC packaging and dual-channel rail-to-rail configuration. However, TLV2453CD is also obsolete and operates within a narrower temperature range (0°C to 70°C versus -40°C to 85°C). For applications requiring the full original temperature range, TLV2463AIDR or TLV2463ID are preferred. TLV2453CD is suitable only for applications operating within 0°C to 70°C.

Q: What is the primary difference between TLV2453 and TLV2463 series substitutes?

A: The TLV2453 series (TLV2453CD, TLV2453CDR) operates at lower performance specifications: 220 kHz gain bandwidth product, 0.11V/µs slew rate, and 10 mA output current per channel. The TLV2463 series (TLV2463AIDR, TLV2463CDR, TLV2463ID) provides higher performance: 6.4 MHz gain bandwidth product, 1.6V/µs slew rate, and 80 mA output current per channel. Selection depends on application bandwidth and output current requirements.

Q: Are all substitute parts RoHS compliant?

A: Yes. All identified Texas Instruments substitute parts (TLV2453CD, TLV2453CDR, TLV2463AIDR, TLV2463CDR, TLV2463ID) are ROHS3 compliant. The original MAX4133ESD is RoHS non-compliant. Substitution with any TLV series component satisfies RoHS regulatory requirements.

Q: Which substitute part is recommended for new designs?

A: TLV2463CDR is recommended for new designs requiring active product status, RoHS3 compliance, and Tape & Reel packaging for automated assembly. TLV2463AIDR is an alternative for applications requiring extended temperature range (-40°C to 125°C). Both parts are active products with full manufacturer support.

Q: What is the maximum supply voltage for substitute parts?

A: All identified substitute parts operate to a maximum supply voltage of 6V. The original MAX4133ESD operates to 6.5V. Applications requiring operation above 6V cannot use any identified substitute part.

Q: Can TLV2463 parts be used in applications designed for TLV2453?

A: Yes. TLV2463 parts are pin-compatible and functionally superior to TLV2453 parts within the same package. TLV2463 provides higher slew rate (1.6V/µs versus 0.11V/µs), higher gain bandwidth product (6.4 MHz versus 220 kHz), and higher output current per channel (80 mA versus 10 mA). Substitution of TLV2463 for TLV2453 is valid for all applications.

Q: What packaging options are available for substitute parts?

A: TLV2453CDR, TLV2463AIDR, and TLV2463CDR are supplied in Tape & Reel (TR) format for automated assembly. TLV2453CD and TLV2463ID are supplied in Tube format for manual or lower-volume assembly. All parts use identical 14-SOIC (0.154", 3.90mm Width) package geometry.

Q: Are there inventory considerations for substitute selection?

A: Current inventory levels are: MAX4133ESD (769 Pcs), TLV2453CD (773 Pcs), TLV2453CDR (682 Pcs), TLV2463AIDR (606 Pcs), TLV2463CDR (2200 Pcs), TLV2463ID (1214 Pcs). TLV2463CDR has the highest available inventory. For long-term procurement, active product status (TLV2453CDR, TLV2463AIDR, TLV2463CDR, TLV2463ID) ensures continued availability beyond current stock levels.