Request Quote
(Ships tomorrow)
MAX4053ESE Equivalent & Substitute Parts
Part Overview
The MAX4053ESE is a 3-circuit SPDT (Single Pole Double Throw) analog switch IC manufactured by Analog Devices Inc./Maxim Integrated, housed in a 16-SOIC surface mount package. This device functions as a 2:1 multiplexer/demultiplexer with 100Ohm on-state resistance and is designed for low-voltage signal switching applications across industrial and consumer electronics.
The MAX4053ESE is classified as Obsolete. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for legacy systems or new designs requiring compatible functionality.
Substiute Parts
Key Parameters
| Parameter | Value |
|---|---|
| Switch Circuit Configuration | SPDT (Single Pole Double Throw) |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Number of Circuits | 3 |
| On-State Resistance (Max) | 100Ohm |
| Channel-to-Channel Matching (ΔRon) | 12Ohm (Max) |
| Voltage - Supply, Single (V+) | 2V ~ 16V |
| Voltage - Supply, Dual (V±) | ±2.7V ~ 8V |
| Switch Time (Ton, Toff) (Max) | 175ns, 150ns |
| Charge Injection | 2pC |
| Channel Capacitance (CS(off), CD(off)) | 2pF, 2pF |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Crosstalk | -90dB @ 100kHz |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154", 3.90mm Width) |
| RoHS Status | RoHS non-compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitution eligibility for the MAX4053ESE is determined by the following critical parameters:
Functional Equivalence Requirements:
- Switch circuit configuration: SPDT
- Multiplexer/demultiplexer circuit: 2:1
- Number of circuits: 3
- Package type: 16-SOIC surface mount
Electrical Compatibility Parameters:
- On-state resistance must not exceed 100Ohm (or be within acceptable application tolerance)
- Supply voltage ranges must overlap or exceed the original specification
- Operating temperature range must cover the required application window
- Channel capacitance and leakage current must be compatible with signal integrity requirements
Substitutes are grouped into two categories:
-
Direct Manufacturer Equivalent (MAX4053ESE+): Identical electrical specifications with improved product status (Active vs. Obsolete) and enhanced RoHS compliance.
-
Cross-Manufacturer Alternatives (CD74HC4053 series from Texas Instruments): Functionally equivalent 3-circuit SPDT 2:1 switches in 16-SOIC packaging. These devices exhibit higher on-state resistance (130Ohm vs. 100Ohm) and different electrical characteristics but maintain core switching functionality and package compatibility.
Parameter Comparison
| Parameter | MAX4053ESE | MAX4053ESE+ | CD74HC4053M | CD74HC4053M96 | CD74HC4053M96G3 | CD74HC4053MT |
|---|---|---|---|---|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated | Analog Devices Inc./Maxim Integrated | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Switch Circuit | SPDT | SPDT | SPDT | SPDT | SPDT | SPDT |
| Multiplexer/Demultiplexer Circuit | 2:1 | 2:1 | 2:1 | 2:1 | 2:1 | 2:1 |
| Number of Circuits | 3 | 3 | 3 | 3 | 3 | 3 |
| On-State Resistance (Max) | 100Ohm | 100Ohm | 130Ohm | 130Ohm | 130Ohm | 130Ohm |
| Channel-to-Channel Matching (ΔRon) | 12Ohm (Max) | 12Ohm (Max) | 5Ohm | 5Ohm | 5Ohm | 5Ohm |
| Voltage - Supply, Single (V+) | 2V ~ 16V | 2V ~ 16V | 2V ~ 6V | 2V ~ 6V | 2V ~ 6V | 2V ~ 6V |
| Voltage - Supply, Dual (V±) | ±2.7V ~ 8V | ±2.7V ~ 8V | ±1V ~ 5V | ±1V ~ 5V | ±1V ~ 5V | ±1V ~ 5V |
| Charge Injection | 2pC | 2pC | — | — | — | — |
| Channel Capacitance (CS(off), CD(off)) | 2pF, 2pF | 2pF, 2pF | 8pF | 8pF | 8pF | 8pF |
| Current - Leakage (IS(off)) (Max) | 1nA | 1nA | 100nA | 100nA | 100nA | 100nA |
| Crosstalk | -90dB @ 100kHz | -90dB @ 100kHz | — | — | — | — |
| Operating Temperature | -40°C ~ 85°C (TA) | -40°C ~ 85°C (TA) | -55°C ~ 125°C (TA) | -55°C ~ 125°C (TA) | -55°C ~ 125°C (TA) | -55°C ~ 125°C (TA) |
| Mounting Type | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount | Surface Mount |
| Package / Case | 16-SOIC (0.154", 3.90mm Width) | 16-SOIC (0.154", 3.90mm Width) | 16-SOIC (0.154", 3.90mm Width) | 16-SOIC (0.154", 3.90mm Width) | 16-SOIC (0.154", 3.90mm Width) | 16-SOIC (0.154", 3.90mm Width) |
| Product Status | Obsolete | Active | Last Time Buy | Active | Obsolete | Last Time Buy |
| RoHS Status | RoHS non-compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) | 1 (Unlimited) |
Engineering Selection Recommendations
MAX4053ESE+ (Direct Upgrade): This part is the recommended primary substitute. It maintains identical electrical specifications and 16-SOIC packaging as the MAX4053ESE while offering Active product status and ROHS3 compliance. Selection of MAX4053ESE+ eliminates obsolescence risk and aligns with modern environmental regulations without requiring circuit redesign.
CD74HC4053 Series (Cross-Manufacturer Alternatives): Texas Instruments CD74HC4053 variants provide functional equivalence in 3-circuit SPDT 2:1 switching with 16-SOIC packaging. These devices are suitable for applications where the higher on-state resistance (130Ohm vs. 100Ohm), reduced supply voltage range (2V ~ 6V single supply vs. 2V ~ 16V), and increased leakage current (100nA vs. 1nA) are acceptable. The CD74HC4053 series offers extended operating temperature range (-55°C ~ 125°C) and improved channel-to-channel matching (5Ohm vs. 12Ohm).
Product Status Considerations:
- CD74HC4053M96 is the only CD74HC4053 variant with Active product status, making it the preferred Texas Instruments option for new designs requiring long-term availability.
- CD74HC4053M and CD74HC4053MT carry Last Time Buy status, indicating limited future availability.
- CD74HC4053M96G3 is Obsolete and should be avoided for new applications.
Compliance and Certification: All substitute parts listed carry ROHS3 compliance and REACH Unaffected status, meeting modern environmental and regulatory requirements.
Frequently Asked Questions (FAQ)
Q: Can MAX4053ESE+ be used as a direct replacement for MAX4053ESE?
A: Yes. MAX4053ESE+ is electrically and mechanically identical to MAX4053ESE, with identical on-state resistance (100Ohm), supply voltage ranges, switching times, and 16-SOIC packaging. The primary differences are product status (Active vs. Obsolete) and RoHS compliance (ROHS3 vs. non-compliant). No circuit modifications are required.
Q: What are the key differences between MAX4053ESE and CD74HC4053 devices?
A: The primary differences are on-state resistance (100Ohm vs. 130Ohm), supply voltage range (2V ~ 16V single supply vs. 2V ~ 6V), leakage current (1nA vs. 100nA), and channel capacitance (2pF vs. 8pF). The CD74HC4053 series offers extended operating temperature range (-55°C ~ 125°C vs. -40°C ~ 85°C) and improved channel-to-channel matching (5Ohm vs. 12Ohm). Applications requiring low leakage, high supply voltage, or low capacitance should prioritize MAX4053ESE or MAX4053ESE+.
Q: Are all CD74HC4053 variants pin-compatible with MAX4053ESE?
A: Yes. All listed CD74HC4053 variants (CD74HC4053M, CD74HC4053M96, CD74HC4053M96G3, CD74HC4053MT) share identical 16-SOIC pinouts and functional switching configurations. Packaging differences (Tube, Cut Tape & Digi-Reel, Tape & Reel) affect supply and handling but not electrical or mechanical compatibility.
Q: Which substitute part should be selected for new production designs?
A: MAX4053ESE+ is the recommended choice for new designs. It maintains full electrical equivalence to MAX4053ESE while offering Active product status and ROHS3 compliance. For applications where the CD74HC4053 electrical characteristics are acceptable, CD74HC4053M96 is the preferred Texas Instruments option due to its Active product status and established availability.
Q: What is the impact of higher on-state resistance in CD74HC4053 devices?
A: The 30Ohm increase in on-state resistance (130Ohm vs. 100Ohm) affects signal attenuation and power dissipation in switching applications. Applications with impedance-sensitive signal paths or high-frequency switching may experience signal degradation. Circuit simulation or bench testing is necessary to confirm compatibility in such applications.
Q: Are there supply voltage compatibility issues when substituting CD74HC4053 for MAX4053ESE?
A: Yes. CD74HC4053 devices support narrower supply voltage ranges (2V ~ 6V single supply, ±1V ~ 5V dual supply) compared to MAX4053ESE (2V ~ 16V single supply, ±2.7V ~ 8V dual supply). Applications requiring supply voltages above 6V single supply or ±5V dual supply cannot use CD74HC4053 devices without circuit redesign.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts