MAX4052CEE Equivalent & Substitute Parts

Part Overview

The MAX4052CEE is a dual 4:1 analog switch IC manufactured by Analog Devices Inc./Maxim Integrated, designed for signal routing and multiplexing applications. It features SP4T (single-pole, four-throw) switching architecture with 100Ohm on-state resistance and operates across single supply (2V to 16V) or dual supply (±2.7V to ±8V) configurations. The device is classified as obsolete, making equivalent and substitute parts necessary for new designs and production continuity.

Substiute Parts

MAX4052CEE

Analog Devices Inc./Maxim IntegratedIn Stock: 2043MAX4052CEE Datasheet

Current PartRFQ

MAX4052CEE+

Analog Devices Inc./Maxim IntegratedIn Stock: 1054MAX4052CEE+ Datasheet

DirectRFQ

CD74HC4052PW

Texas InstrumentsIn Stock: 2687CD74HC4052PW Datasheet

MFR RecommendedRFQ

CD74HC4052PWR

Texas InstrumentsIn Stock: 35150CD74HC4052PWR Datasheet

MFR RecommendedRFQ

CD74HC4052PWT

Texas InstrumentsIn Stock: 3514CD74HC4052PWT Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MAX4052CEE is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

• Switch circuit configuration: SP4T with 4:1 multiplexer/demultiplexer architecture
• Number of circuits: 2
• On-state resistance tolerance: Maximum 100Ohm to 130Ohm
• Supply voltage compatibility: Single supply 2V ~ 6V or dual supply ±1V ~ 5V (subset of original range)
• Surface mount packaging: 16-pin SSOP or TSSOP variants
• Leakage current: Maximum 1nA to 200nA

Substitute Parts Identified:

1. MAX4052CEE+ (Analog Devices Inc./Maxim Integrated) - Direct equivalent with identical electrical specifications and active product status
2. CD74HC4052PW (Texas Instruments) - Functionally equivalent with higher on-state resistance (130Ohm) and extended operating temperature range
3. CD74HC4052PWR (Texas Instruments) - Functionally equivalent with higher on-state resistance (130Ohm), active product status, and extended operating temperature range
4. CD74HC4052PWT (Texas Instruments) - Functionally equivalent with higher on-state resistance (130Ohm) and extended operating temperature range

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Identical Specifications): Select MAX4052CEE+ when the original MAX4052CEE specifications must be maintained exactly. This part is manufactured by the same supplier, carries active product status, and provides ROHS3 compliance. It is the preferred choice for designs requiring no circuit modifications.

For Functional Equivalence with Extended Operating Range: The CD74HC4052 series (CD74HC4052PW, CD74HC4052PWR, CD74HC4052PWT) from Texas Instruments provides functional equivalence with the following trade-offs: on-state resistance increases from 100Ohm to 130Ohm, channel capacitance increases from 2pF to 12pF, and leakage current increases from 1nA to 200nA. These parts offer extended operating temperature range (-55°C to 125°C versus 0°C to 70°C) and ROHS3 compliance. CD74HC4052PWR is recommended for new production due to active product status and highest inventory availability (35,100 units).

For Supply Voltage Constraints: Designs operating at supply voltages exceeding 6V single supply or ±5V dual supply must use MAX4052CEE or MAX4052CEE+, as the CD74HC4052 series is limited to 2V ~ 6V single supply and ±1V ~ 5V dual supply.

For Packaging Considerations: MAX4052CEE and MAX4052CEE+ use 16-SSOP (3.90mm width), while CD74HC4052 variants use 16-TSSOP (4.40mm width). PCB layout modifications are required when switching between these package types.

Frequently Asked Questions (FAQ)

Q: Can CD74HC4052 series parts directly replace MAX4052CEE in all applications?

A: Functional replacement is possible when circuit design accommodates the following parameter differences: on-state resistance of 130Ohm (versus 100Ohm), channel capacitance of 12pF (versus 2pF), and leakage current of 200nA (versus 1nA). Supply voltage must not exceed 2V ~ 6V single supply or ±1V ~ 5V dual supply. Applications sensitive to on-state resistance, capacitance, or leakage current require circuit analysis before substitution.

Q: What is the difference between MAX4052CEE and MAX4052CEE+?

A: Both parts are electrically identical with SP4T 4:1 switching architecture and 100Ohm on-state resistance. The primary difference is product status: MAX4052CEE is obsolete, while MAX4052CEE+ is active. MAX4052CEE+ also carries ROHS3 compliance. For new designs, MAX4052CEE+ is the recommended choice.

Q: Are CD74HC4052PW, CD74HC4052PWR, and CD74HC4052PWT interchangeable?

A: These three parts are electrically identical and differ only in packaging format and product status. CD74HC4052PW and CD74HC4052PWT are Last Time Buy status, while CD74HC4052PWR is active. All three use 16-TSSOP packaging. CD74HC4052PWR is recommended for new production.

Q: What are the packaging differences between MAX4052CEE and CD74HC4052 series?

A: MAX4052CEE uses 16-SSOP (0.154", 3.90mm width), while CD74HC4052 series uses 16-TSSOP (0.173", 4.40mm width). The TSSOP package is slightly wider. PCB footprint modifications are required when transitioning between these packages.

Q: Which substitute part should be selected for high-temperature applications?

A: CD74HC4052 series parts support operating temperature range of -55°C to 125°C, compared to MAX4052CEE at 0°C to 70°C. For applications requiring extended temperature operation, CD74HC4052PWR (active status) is the appropriate selection.

Q: Is RoHS compliance a factor in part selection?

A: MAX4052CEE is RoHS non-compliant, while MAX4052CEE+ and all CD74HC4052 variants are ROHS3 compliant. For applications subject to RoHS regulations, MAX4052CEE+ or CD74HC4052 series must be selected.