MAX362ESE Equivalent & Substitute Parts

Part Overview

The MAX362ESE is a 4-circuit SPST-NO IC switch manufactured by Analog Devices Inc./Maxim Integrated, designed for interface applications requiring low on-state resistance and fast switching performance. This component features 85Ohm maximum on-state resistance with 1:1 multiplexer/demultiplexer configuration in a 16-SOIC surface mount package.

The MAX362ESE is classified as obsolete. Identifying equivalent and substitute parts is necessary to ensure design continuity, maintain supply chain reliability, and support ongoing production requirements for applications currently utilizing this component.

Key Parameters

Parameter	Value
Switch Circuit Type	SPST - NO
Number of Circuits	4
Multiplexer/Demultiplexer Configuration	1:1
On-State Resistance (Max)	85Ohm
Channel-to-Channel Matching (ΔRon)	2Ohm (Max)
Voltage - Supply, Single (V+)	10V ~ 30V
Voltage - Supply, Dual (V±)	±4.5V ~ 20V
Switch Time (Ton, Toff)	250ns, 120ns (Max)
Charge Injection	5pC
Channel Capacitance (CS(off), CD(off))	4pF, 4pF
Current - Leakage (IS(off)) (Max)	500pA
Crosstalk	-100dB @ 1MHz
Operating Temperature	-40°C ~ 85°C (TA)
Package / Case	16-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount

Substitute Part Grouping Explanation

Substitution eligibility for the MAX362ESE is determined by strict equivalence across the following critical parameters:

Switch circuit topology (SPST - NO)
Number of circuits (4)
Multiplexer/demultiplexer configuration (1:1)
On-state resistance maximum (85Ohm)
Channel-to-channel matching (2Ohm Max)
Supply voltage ranges (10V ~ 30V single; ±4.5V ~ 20V dual)
Switch timing specifications (250ns Ton, 120ns Toff Max)
Charge injection (5pC)
Channel capacitance values (4pF, 4pF)
Leakage current (500pA Max)
Crosstalk performance (-100dB @ 1MHz)
Operating temperature range (-40°C ~ 85°C)
Package type (16-SOIC)

All identified substitute parts meet these electrical and mechanical requirements without deviation.

Parameter Comparison

Parameter	MAX362ESE (Main)	MAX362ESE+ (Direct)	MAX365ESE+ (Parametric)
Manufacturer	Analog Devices Inc./Maxim Integrated	Analog Devices Inc./Maxim Integrated	Analog Devices Inc./Maxim Integrated
Product Status	Obsolete	Active	Active
Switch Circuit	SPST - NO	SPST - NO	SPST - NO
Number of Circuits	4	4	4
On-State Resistance (Max)	85Ohm	85Ohm	85Ohm
Channel-to-Channel Matching (ΔRon)	2Ohm (Max)	2Ohm (Max)	2Ohm (Max)
Voltage - Supply, Single (V+)	10V ~ 30V	10V ~ 30V	10V ~ 30V
Voltage - Supply, Dual (V±)	±4.5V ~ 20V	±4.5V ~ 20V	±4.5V ~ 20V
Switch Time (Ton, Toff) (Max)	250ns, 120ns	250ns, 120ns	250ns, 120ns
Charge Injection	5pC	5pC	5pC
Channel Capacitance (CS(off), CD(off))	4pF, 4pF	4pF, 4pF	4pF, 4pF
Current - Leakage (IS(off)) (Max)	500pA	500pA	500pA
Crosstalk	-100dB @ 1MHz	-100dB @ 1MHz	-100dB @ 1MHz
Operating Temperature	-40°C ~ 85°C (TA)	-40°C ~ 85°C (TA)	-40°C ~ 85°C (TA)
Package / Case	16-SOIC (0.154", 3.90mm Width)	16-SOIC (0.154", 3.90mm Width)	16-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount	Surface Mount	Surface Mount
RoHS Status	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected

Engineering Selection Recommendations

MAX362ESE+ (Direct Substitute)

The MAX362ESE+ is the direct successor to the MAX362ESE, maintaining identical electrical and mechanical specifications while offering active product status. This part is ROHS3 compliant, addressing regulatory requirements that may apply to new designs or production runs. The MAX362ESE+ is available in tube packaging and represents the primary replacement path for obsolete MAX362ESE inventory.

MAX365ESE+ (Parametric Equivalent)

The MAX365ESE+ provides parametric equivalence across all critical switching and electrical characteristics. This part is also ROHS3 compliant and maintains active product status. The MAX365ESE+ differs only in base product designation (MAX365 versus MAX362) while delivering identical performance parameters. This part is available in tube packaging.

Both substitute parts maintain full electrical compatibility with existing MAX362ESE designs and support identical PCB layouts and signal integrity requirements.

Frequently Asked Questions (FAQ)

Q: Can MAX362ESE+ be used as a direct replacement for MAX362ESE?

A: Yes. The MAX362ESE+ maintains identical electrical specifications, on-state resistance, switching characteristics, and package configuration. The primary differences are active product status and ROHS3 compliance. No circuit modifications are required.

Q: What is the difference between MAX362ESE+ and MAX365ESE+?

A: Both parts are parametrically equivalent with identical electrical performance across all switching, timing, and leakage specifications. The base product designation differs (MAX362 versus MAX365), but this does not affect functional compatibility or performance in applications designed for the MAX362ESE.

Q: Are the substitute parts pin-compatible with the original MAX362ESE?

A: Yes. Both MAX362ESE+ and MAX365ESE+ use the 16-SOIC package with identical pinout and mechanical dimensions (0.154" width, 3.90mm). Direct PCB substitution is supported without layout modifications.

Q: Does the ROHS3 compliance of substitute parts affect circuit performance?

A: No. ROHS3 compliance reflects manufacturing process changes and material composition but does not alter electrical performance, switching characteristics, or operating specifications. All electrical parameters remain identical to the original MAX362ESE.

Q: What is the inventory status of substitute parts?

A: MAX362ESE+ has 3200 pieces in stock. MAX365ESE+ has 3100 pieces in stock. Both are available as new original components in tube packaging.

Q: Can both substitute parts be used interchangeably in the same design?

A: Yes. Since MAX362ESE+ and MAX365ESE+ are parametrically equivalent with identical electrical specifications, either part can be selected based on availability and supply chain requirements without affecting circuit performance or reliability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message