MAX359EPE+ Equivalent & Substitute Parts

Part Overview

The MAX359EPE+ is an analog multiplexer with fault protection functionality, manufactured by Analog Devices Inc./Maxim Integrated. This 16-DIP packaged interface IC operates as a circuit switch and is classified as an active product with full production support. The device is ROHS3 compliant with MSL 1 rating, indicating unlimited moisture sensitivity tolerance. Equivalent and substitute parts are identified based on matching electrical characteristics, package compatibility, and functional equivalence in analog switching applications.

Substiute Parts

MAX359EPE+

Analog Devices Inc./Maxim IntegratedIn Stock: 4726MAX359EPE+ Datasheet

Current PartRFQ

MAX359EPE+

Analog Devices Inc./Maxim IntegratedIn Stock: 4726MAX359EPE+ Datasheet

DirectRFQ

MPC509AP

Texas InstrumentsIn Stock: 4630MPC509AP Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MAX359EPE+ is determined by the following criteria:

Primary Substitution Criteria:

• Package type: 16-DIP form factor
• Functional classification: Analog multiplexer/switch interface IC
• Product status: Active manufacturing status
• Compliance certifications: ROHS3 compliance and REACH unaffected status
• Mounting type: Through-hole configuration

The MPC509AP from Texas Instruments qualifies as a direct substitute based on matching 16-DIP package geometry, active product status, identical ROHS3 compliance, and equivalent analog switching functionality. Both devices operate as circuit switches in the interface category with through-hole mounting compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the MAX359EPE+ and MPC509AP are active products with identical compliance certifications (ROHS3, REACH unaffected, EAR99 classification). Selection between these parts should be based on application-specific electrical requirements not provided in the base specification. The 16-DIP package geometry is identical across both devices, ensuring mechanical compatibility in through-hole PCB designs. Inventory availability and lead time considerations may influence procurement decisions, with both parts currently in stock.

Frequently Asked Questions (FAQ)

Q: Can MPC509AP directly replace MAX359EPE+ in existing designs? A: Both devices share identical 16-DIP package dimensions (0.300", 7.62mm), through-hole mounting configuration, and compliance certifications. Substitution feasibility depends on matching the electrical specifications of your specific application circuit.

Q: Are there differences in compliance or environmental ratings? A: Both parts are ROHS3 compliant and REACH unaffected. The MAX359EPE+ has MSL 1 rating (unlimited moisture sensitivity tolerance), while MPC509AP has no applicable MSL rating. Both are classified as EAR99 for export control purposes.

Q: What are the key electrical differences between these parts? A: The MPC509AP specifies on-state resistance of 1.5kOhm maximum, switch timing of 200ns/250ns, and dual supply voltage range of ±5V to ±22V. Equivalent electrical parameters for the MAX359EPE+ are not provided in this reference.

Q: Are both parts suitable for new designs? A: Both MAX359EPE+ and MPC509AP maintain active product status with ongoing manufacturing support, making them appropriate for new design implementations.

Q: What packaging options are available? A: Both parts are supplied in tube packaging format with 16-DIP through-hole configuration. No surface-mount or alternative package variants are specified for these part numbers.