MAX3232IDG4 Equivalent & Substitute Parts

Part Overview

The MAX3232IDG4 is a full-duplex RS232 transceiver manufactured by Texas Instruments, featuring 2 drivers and 2 receivers in a 16-SOIC package. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and production continuity. The part operates across a 3V to 5.5V supply range with a 250 kbps data rate and supports industrial temperature ranges from -40°C to 85°C.

Key Parameters

Parameter	MAX3232IDG4
Manufacturer	Texas Instruments
Type	Transceiver
Protocol	RS232
Number of Drivers/Receivers	2/2
Duplex	Full
Receiver Hysteresis	300 mV
Data Rate	250 kbps
Voltage - Supply	3V ~ 5.5V
Operating Temperature	-40°C ~ 85°C
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154", 3.90mm Width)
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution for the MAX3232IDG4 is determined by the following critical parameters:

Protocol: RS232 full-duplex transceiver
Configuration: 2 drivers and 2 receivers
Package: 16-SOIC surface mount with 0.154" (3.90mm) width
Supply voltage range: 3V to 5.5V
Operating temperature: -40°C to 85°C
Data rate capability: minimum 250 kbps

Substitute parts are grouped into two categories based on package width specifications. Primary substitutes maintain the 0.154" (3.90mm) width specification, ensuring direct mechanical and electrical compatibility. Secondary substitutes with 0.295" (7.50mm) width require board layout verification but maintain full electrical compatibility.

Parameter Comparison

Part Number	Manufacturer	Product Status	Drivers/Receivers	Data Rate	Receiver Hysteresis	Operating Temp	Package Width	Packaging Type
MAX3232IDG4	Texas Instruments	Obsolete	2/2	250 kbps	300 mV	-40°C ~ 85°C	0.154"	16-SOIC
ADM3202ARNZ	Analog Devices Inc.	Active	2/2	460 kbps	400 mV	-40°C ~ 85°C	0.154"	Tube
ADM3202ARNZ-REEL	Analog Devices Inc.	Active	2/2	460 kbps	400 mV	-40°C ~ 85°C	0.154"	Cut Tape & Digi-Reel
ADM3202ARNZ-REEL7	Analog Devices Inc.	Active	2/2	460 kbps	400 mV	-40°C ~ 85°C	0.154"	Cut Tape & Digi-Reel
ADM3202ARWZ	Analog Devices Inc.	Active	2/2	460 kbps	400 mV	-40°C ~ 85°C	0.295"	Tube
ADM3202ARWZ-REEL	Analog Devices Inc.	Active	2/2	460 kbps	400 mV	-40°C ~ 85°C	0.295"	Cut Tape & Digi-Reel
ADM3202ARWZ-REEL7	Analog Devices Inc.	Active	2/2	460 kbps	400 mV	-40°C ~ 85°C	0.295"	Tape & Reel
ADM3232EARNZ	UMW	Active	2/2	235 kbps	300 mV	-40°C ~ 85°C	0.154"	Cut Tape & Digi-Reel
ADM3232EARNZ-REEL7	Analog Devices Inc.	Active	2/2	460 kbps	500 mV	-40°C ~ 85°C	0.154"	Cut Tape & Digi-Reel
ICL3232CBNZ	Renesas Electronics Corporation	Active	2/2	250 kbps	300 mV	0°C ~ 70°C	0.154"	Tube
ICL3232CBNZ-T	Renesas Electronics Corporation	Active	2/2	250 kbps	300 mV	0°C ~ 70°C	0.154"	Cut Tape & Digi-Reel

Engineering Selection Recommendations

All substitute parts listed maintain ROHS3 compliance and REACH unaffected status, consistent with the original MAX3232IDG4 specification. Selection should prioritize active product status parts to ensure long-term availability and manufacturing support.

For applications requiring the full industrial temperature range (-40°C to 85°C), select from ADM3202 series variants or ADM3232EARNZ-REEL7. The ADM3202 series offers enhanced data rate performance at 460 kbps, exceeding the original 250 kbps specification.

For applications with reduced temperature requirements (0°C to 70°C), ICL3232CBNZ and ICL3232CBNZ-T variants from Renesas Electronics Corporation provide direct parameter matching with the original part, including identical 250 kbps data rate and 300 mV receiver hysteresis.

Package width compatibility is critical for board-level integration. Parts with 0.154" (3.90mm) width provide direct mechanical substitution. Parts with 0.295" (7.50mm) width require PCB footprint verification before implementation.

Frequently Asked Questions (FAQ)

Q: Can ADM3202 series parts directly replace MAX3232IDG4 in existing designs?

A: Yes, ADM3202ARNZ, ADM3202ARNZ-REEL, and ADM3202ARNZ-REEL7 provide direct electrical and mechanical substitution. All maintain 2/2 driver/receiver configuration, 3V to 5.5V supply range, -40°C to 85°C operating temperature, and 16-SOIC 0.154" package width. The enhanced 460 kbps data rate exceeds original specifications and provides performance margin.

Q: What is the difference between ADM3202ARNZ and ADM3202ARWZ variants?

A: The primary difference is package width. ADM3202ARNZ variants use 0.154" (3.90mm) width, matching the original MAX3232IDG4 footprint. ADM3202ARWZ variants use 0.295" (7.50mm) width and require PCB layout verification for compatibility.

Q: Are ICL3232 parts suitable for industrial temperature applications?

A: ICL3232CBNZ and ICL3232CBNZ-T operate within 0°C to 70°C range, which is narrower than the original -40°C to 85°C specification. These parts are suitable only for applications within this reduced temperature window.

Q: What packaging options are available for production quantities?

A: Tube packaging is available for lower volumes. Cut Tape & Digi-Reel and Tape & Reel options support automated assembly processes for higher production volumes. Selection depends on manufacturing process requirements and order quantities.

Q: Does ADM3232EARNZ from UMW provide equivalent performance?

A: ADM3232EARNZ maintains the 300 mV receiver hysteresis and -40°C to 85°C operating range. However, the 235 kbps data rate is lower than the original 250 kbps specification. This part is suitable only for applications with data rate requirements below 235 kbps.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message