MAX3232EEAE Equivalent & Substitute Parts

Part Overview

The MAX3232EEAE is a 2/2 transceiver full RS232 interface IC in 16-SSOP packaging manufactured by Analog Devices Inc./Maxim Integrated. This part is classified as obsolete, making equivalent and substitute parts necessary for new designs and ongoing production support. The MAX3232EEAE provides dual driver and receiver channels for RS232 serial communication with full-duplex capability, operating across a 3V to 5.5V supply range and supporting data rates up to 250kbps.

Key Parameters

Parameter	MAX3232EEAE
Manufacturer	Analog Devices Inc./Maxim Integrated
Type	Transceiver
Protocol	RS232
Drivers/Receivers	2/2
Duplex	Full
Data Rate	250kbps
Voltage Supply	3V ~ 5.5V
Operating Temperature	-40°C ~ 85°C
Package/Case	16-SSOP (0.209", 5.30mm Width)
Mounting Type	Surface Mount
Receiver Hysteresis	500 mV
Product Status	Obsolete
RoHS Status	RoHS non-compliant

Substitute Part Grouping Explanation

Substitution for the MAX3232EEAE is determined by the following critical parameters: RS232 protocol compliance, 2/2 driver/receiver configuration, full-duplex operation, 16-SSOP package compatibility, 3V to 5.5V supply voltage range, and -40°C to 85°C operating temperature range.

Substitute parts are grouped into three categories:

Parametric Equivalents (Same Configuration, Active Status): MAX3232EEAE+, MAX3221EEAE+, MAX3226EAE+, and MAX3226EEAE+ maintain identical electrical specifications and package dimensions. These parts are manufactured by Analog Devices Inc./Maxim Integrated and carry active product status with RoHS3 compliance.

Direct Manufacturer Substitute (Alternative Manufacturer): SP3232EBEA-L/TR from MaxLinear, Inc. provides equivalent 2/2 transceiver functionality in 16-SSOP packaging with matching voltage and temperature ranges. This part differs in receiver hysteresis (300 mV vs. 500 mV) and MSL rating but maintains full RS232 compatibility.

Manufacturer Recommended Alternatives (Enhanced Performance): ADM202EARUZ, ADM202EARUZ-REEL, ADM202EARUZ-REEL7, ADM3202ARUZ, and ADM3202ARUZ-REEL from Analog Devices Inc. offer higher data rates (230kbps to 460kbps) and improved receiver hysteresis specifications. These parts use 16-TSSOP packaging (0.173", 4.40mm Width) instead of 16-SSOP, requiring PCB layout modification.

Parameter Comparison

Part Number	Manufacturer	Drivers/Receivers	Data Rate	Voltage Supply	Package	Receiver Hysteresis	Product Status	RoHS Status
MAX3232EEAE	Analog Devices/Maxim	2/2	250kbps	3V ~ 5.5V	16-SSOP	500 mV	Obsolete	Non-compliant
MAX3232EEAE+	Analog Devices/Maxim	2/2	250kbps	3V ~ 5.5V	16-SSOP	500 mV	Active	ROHS3 Compliant
MAX3221EEAE+	Analog Devices/Maxim	1/1	250kbps	3V ~ 5.5V	16-SSOP	500 mV	Active	ROHS3 Compliant
MAX3226EAE+	Analog Devices/Maxim	1/1	250kbps	3V ~ 5.5V	16-SSOP	500 mV	Active	ROHS3 Compliant
MAX3226EEAE+	Analog Devices/Maxim	1/1	250kbps	3V ~ 5.5V	16-SSOP	500 mV	Active	ROHS3 Compliant
SP3232EBEA-L/TR	MaxLinear, Inc.	2/2	250kbps	3V ~ 5.5V	16-SSOP	300 mV	Active	RoHS Compliant
ADM202EARUZ	Analog Devices	2/2	230kbps	4.5V ~ 5.5V	16-TSSOP	650 mV	Active	ROHS3 Compliant
ADM3202ARUZ	Analog Devices	2/2	460Kbps	3V ~ 5.5V	16-TSSOP	400 mV	Active	ROHS3 Compliant

Engineering Selection Recommendations

For Direct Replacement (Same Package, Same Pinout): Select MAX3232EEAE+ as the primary substitute. This part maintains identical electrical specifications, 16-SSOP package dimensions, and pinout compatibility with the obsolete MAX3232EEAE. The active product status and RoHS3 compliance provide long-term supply assurance and regulatory compliance for new designs.

For Single-Channel Applications: MAX3221EEAE+ and MAX3226EAE+/MAX3226EEAE+ are suitable when only one driver/receiver channel is required. These parts share the same 16-SSOP package, voltage range, and data rate specifications, reducing component cost while maintaining compatibility with existing PCB layouts.

For Alternative Manufacturer Supply: SP3232EBEA-L/TR from MaxLinear provides a 2/2 transceiver alternative in 16-SSOP packaging with active product status. The reduced receiver hysteresis (300 mV vs. 500 mV) may improve noise immunity in certain applications. Tape & Reel packaging supports high-volume production requirements.

For Enhanced Performance Requirements: ADM3202ARUZ and ADM3202ARUZ-REEL offer superior data rate performance (460kbps vs. 250kbps) and improved receiver hysteresis (400 mV). These parts require PCB redesign due to 16-TSSOP package substitution but provide future-proof performance headroom. RoHS3 compliance and active product status ensure regulatory alignment and supply continuity.

For Constrained Supply Voltage: ADM202EARUZ series requires minimum 4.5V supply voltage, making it unsuitable for 3V-only applications. Verify supply voltage specifications before selection.

Frequently Asked Questions (FAQ)

Q: Can MAX3221EEAE+ or MAX3226EEAE+ replace MAX3232EEAE in existing designs?

A: MAX3221EEAE+ and MAX3226EEAE+ are pin-compatible and package-compatible substitutes but provide only 1/1 driver/receiver configuration versus the 2/2 configuration of MAX3232EEAE. These parts are suitable only if the application requires single-channel RS232 communication. For dual-channel applications, MAX3232EEAE+ is the correct substitute.

Q: What is the difference between 16-SSOP and 16-TSSOP packages?

A: 16-SSOP (Shrink Small Outline Package) has a 5.30mm body width, while 16-TSSOP (Thin Shrink Small Outline Package) has a 4.40mm body width. These packages are not pin-compatible and require different PCB footprints. ADM202EARUZ and ADM3202ARUZ use 16-TSSOP and cannot be used as drop-in replacements without PCB redesign.

Q: Why is receiver hysteresis different across substitute parts?

A: Receiver hysteresis affects input threshold switching behavior and noise immunity. MAX3232EEAE specifies 500 mV hysteresis, while SP3232EBEA-L/TR provides 300 mV and ADM3202ARUZ provides 400 mV. Lower hysteresis improves sensitivity but may increase susceptibility to noise. Higher hysteresis improves noise immunity but reduces sensitivity. Select based on application signal integrity requirements.

Q: Is MAX3232EEAE+ a direct replacement for MAX3232EEAE?

A: Yes. MAX3232EEAE+ is functionally and physically identical to MAX3232EEAE with identical pinout, package dimensions, electrical specifications, and operating ranges. The primary difference is product status (active vs. obsolete) and RoHS3 compliance, making it the recommended direct replacement.

Q: Can ADM202EARUZ operate at 3V supply voltage?

A: No. ADM202EARUZ requires 4.5V to 5.5V supply voltage and cannot operate at the 3V minimum specified for MAX3232EEAE. Verify supply voltage availability before selecting this part.

Q: What inventory considerations apply to these substitutes?

A: MAX3232EEAE+ (2000 pcs), SP3232EBEA-L/TR (29349 pcs), and ADM3202ARUZ-REEL (25400 pcs) offer substantial inventory availability. MAX3221EEAE+ (1902 pcs) and ADM202EARUZ-REEL (1922 pcs) have lower stock levels. Verify current availability with suppliers for production planning.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message