MAX3160CAP-T Equivalent & Substitute Parts

Part Overview

The MAX3160CAP-T is a 2/2 transceiver IC supporting full-duplex RS232, RS422, and RS485 protocols in a 20-SSOP surface mount package. This part is classified as obsolete, making equivalent substitute parts necessary for ongoing design support and procurement. The MAX3160 series provides multi-protocol transceiver functionality suitable for industrial communication applications requiring mixed-mode serial interface capability.

Substiute Parts

MAX3160CAP-T

Analog Devices Inc./Maxim IntegratedIn Stock: 1028MAX3160CAP-T Datasheet

Current PartRFQ

MAX3160CAP+T

Analog Devices Inc./Maxim IntegratedIn Stock: 2308MAX3160CAP+T Datasheet

Parametric EquivalentRFQ

MAX3160ECAP+T

Analog Devices Inc./Maxim IntegratedIn Stock: 3812MAX3160ECAP+T Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the MAX3160CAP-T are determined by strict equivalence across the following parameters:

• Protocol support (RS232, RS422, RS485)
• Driver/receiver configuration (2/2)
• Duplex capability (Full)
• Receiver hysteresis (500 mV)
• Data rate (10 Mbps)
• Supply voltage range (3V to 5.5V)
• Operating temperature range (0°C to 70°C)
• Package and pinout (20-SSOP)

The identified substitutes maintain identical electrical and mechanical specifications while differing in product status and compliance certifications. Both substitute parts are active products with current manufacturing status, addressing the obsolescence of the original MAX3160CAP-T.

Parameter Comparison

Engineering Selection Recommendations

Both MAX3160CAP+T and MAX3160ECAP+T are direct parametric equivalents to the obsolete MAX3160CAP-T. Selection between these substitutes should be based on the following factors:

Product Availability: MAX3160ECAP+T maintains higher inventory levels (3742 pcs) compared to MAX3160CAP+T (2220 pcs), providing greater procurement flexibility for volume requirements.

Compliance Requirements: Both substitute parts are ROHS3 compliant, addressing regulatory requirements that the original MAX3160CAP-T does not meet. Selection should align with end-product compliance mandates.

Packaging Format: MAX3160CAP+T and MAX3160ECAP+T are supplied in Cut Tape (CT) and Digi-Reel® formats, differing from the original part's packaging specification. Verify compatibility with assembly equipment and procurement workflows.

Active Product Status: Both substitutes are active products with current manufacturing support, ensuring long-term availability and technical support compared to the obsolete original part.

Frequently Asked Questions (FAQ)

Q: Are MAX3160CAP+T and MAX3160ECAP+T pin-for-pin compatible with MAX3160CAP-T?

A: Yes. All three parts share identical 20-SSOP package geometry and pinout. Direct PCB substitution is supported without layout modifications.

Q: What are the key electrical differences between the substitute parts and the original?

A: There are no electrical differences. All parts maintain identical protocol support (RS232, RS422, RS485), driver/receiver configuration (2/2), data rate (10 Mbps), supply voltage range (3V to 5.5V), and operating temperature range (0°C to 70°C).

Q: Why should I choose an active product over the obsolete MAX3160CAP-T?

A: Active products ensure continued manufacturing, technical support, and procurement availability. Obsolete parts face supply discontinuation and lack manufacturer support for design questions or application guidance.

Q: Do the substitute parts meet RoHS requirements?

A: Yes. Both MAX3160CAP+T and MAX3160ECAP+T are ROHS3 compliant. The original MAX3160CAP-T is RoHS non-compliant. Selection of compliant substitutes is necessary for products subject to RoHS regulations.

Q: Are there any moisture sensitivity considerations for these parts?

A: All three parts carry MSL Rating 1 (Unlimited), indicating no moisture sensitivity restrictions. Standard handling and storage practices apply.

Q: What is the difference between Cut Tape (CT) and Digi-Reel® packaging?

A: Cut Tape packaging provides components in tape form suitable for manual or semi-automated assembly. Digi-Reel® is a reel format optimized for high-speed automated pick-and-place equipment. Both formats contain identical components; selection depends on assembly process requirements.