Request Quote
(Ships tomorrow)
MAX310EPE Equivalent & Substitute Parts
Part Overview
The MAX310EPE is a CMOS RF video multiplexer IC manufactured by Analog Devices Inc./Maxim Integrated. This 8:1 video switch operates as a single-channel interface component in a 16-DIP package, designed for video signal routing applications. The device features break-before-make switching architecture with on-state resistance of 250Ω maximum and supports dual supply voltage configurations (±4.5V to ±18V) or single supply (9V to 36V).
The MAX310EPE is classified as obsolete. Locating equivalent or substitute components becomes necessary when original stock is depleted or when design updates require components with improved compliance status or extended product lifecycle support.
Substiute Parts
Key Parameters
| Parameter | Specification |
|---|---|
| Multiplexer Configuration | 8:1 |
| Number of Channels | 1 |
| On-State Resistance (Max) | 250Ω |
| Voltage Supply - Single (V+) | 9V ~ 36V |
| Voltage Supply - Dual (V±) | ±4.5V ~ 18V |
| Operating Temperature Range | -40°C ~ 85°C (TA) |
| Switching Feature | Break-Before-Make |
| Package Type | 16-DIP (0.300", 7.62mm) |
| Mounting Type | Through Hole |
Substitute Part Grouping Explanation
Substitution eligibility for the MAX310EPE is determined by strict equivalence across the following critical parameters:
- Multiplexer/Demultiplexer circuit configuration: 8:1
- Number of channels: 1
- On-state resistance maximum: 250Ω
- Supply voltage ranges: Single (9V ~ 36V) and Dual (±4.5V ~ ±18V)
- Operating temperature range: -40°C ~ 85°C
- Switching architecture: Break-Before-Make
- Package and mounting: 16-DIP through-hole
The MAX310EPE+ meets all electrical and mechanical parameters required for direct substitution. Both devices share identical functional specifications, pin configurations, and performance characteristics within the specified operating ranges.
Parameter Comparison
| Parameter | MAX310EPE (Main Part) | MAX310EPE+ (Substitute) |
|---|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated | Analog Devices Inc./Maxim Integrated |
| Category | Interface | Interface |
| Multiplexer Configuration | 8:1 | 8:1 |
| Number of Channels | 1 | 1 |
| On-State Resistance (Max) | 250Ω | 250Ω |
| Voltage Supply - Single (V+) | 9V ~ 36V | 9V ~ 36V |
| Voltage Supply - Dual (V±) | ±4.5V ~ 18V | ±4.5V ~ 18V |
| Operating Temperature | -40°C ~ 85°C (TA) | -40°C ~ 85°C (TA) |
| Switching Feature | Break-Before-Make | Break-Before-Make |
| Package / Case | 16-DIP (0.300", 7.62mm) | 16-DIP (0.300", 7.62mm) |
| Mounting Type | Through Hole | Through Hole |
| Product Status | Obsolete | Active |
| RoHS Status | RoHS non-compliant | ROHS3 Compliant |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) | 1 (Unlimited) |
| REACH Status | REACH Unaffected | REACH Unaffected |
Engineering Selection Recommendations
The MAX310EPE+ is the direct substitute for the MAX310EPE. Both components are electrically and mechanically identical across all specified parameters. The primary distinction is product lifecycle status and regulatory compliance:
The MAX310EPE is obsolete, limiting long-term availability and supply chain reliability. The MAX310EPE+ maintains active product status, ensuring continued manufacturer support and component availability.
The MAX310EPE+ achieves ROHS3 compliance, whereas the original MAX310EPE is non-compliant. For applications subject to RoHS directives or environmental regulations, the MAX310EPE+ is the appropriate selection. Both devices maintain identical REACH and ECCN classifications.
Selection between these components should be based on supply chain requirements, regulatory compliance mandates, and long-term product lifecycle considerations rather than electrical performance, as both deliver equivalent functionality.
Frequently Asked Questions (FAQ)
Q: Are MAX310EPE and MAX310EPE+ pin-for-pin compatible?
A: Yes. Both devices use the 16-DIP package with identical pin configurations and electrical characteristics. Direct PCB substitution is possible without circuit modification.
Q: What is the primary reason to substitute MAX310EPE with MAX310EPE+?
A: The MAX310EPE is obsolete. The MAX310EPE+ is an active product with ongoing manufacturer support, ensuring supply availability and long-term component sourcing reliability.
Q: Does the MAX310EPE+ meet RoHS requirements?
A: Yes. The MAX310EPE+ is ROHS3 compliant. The original MAX310EPE is non-compliant. Applications requiring RoHS certification must use the MAX310EPE+.
Q: Are there electrical performance differences between these parts?
A: No. Both components deliver identical electrical specifications: 8:1 multiplexer configuration, 250Ω maximum on-state resistance, break-before-make switching, and equivalent supply voltage ranges (9V ~ 36V single or ±4.5V ~ ±18V dual).
Q: Can MAX310EPE+ be used in existing designs without redesign?
A: Yes. The MAX310EPE+ is a direct functional and mechanical equivalent. No circuit redesign, PCB layout modification, or firmware changes are required.
Q: What is the operating temperature range for both devices?
A: Both the MAX310EPE and MAX310EPE+ operate across -40°C to 85°C (TA), supporting industrial and commercial temperature specifications.
Q: Are moisture sensitivity levels different between the two parts?
A: No. Both devices have MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts