MAX3098EBEEE RS422/RS485 Receiver Interface IC — Equivalent & Substitute Parts

Part Overview

The MAX3098EBEEE is a 0/3 Receiver RS422/RS485 interface IC manufactured by Analog Devices Inc./Maxim Integrated in a 16-QSOP surface mount package. This component is classified as obsolete, making identification of equivalent and substitute parts essential for ongoing system support and procurement planning. The part operates across a 3V to 5.5V supply range with a maximum data rate of 32 Mbps and receiver hysteresis of 40 mV, suitable for industrial serial communication applications requiring robust noise immunity.

Substiute Parts

MAX3098EBEEE

Analog Devices Inc./Maxim IntegratedIn Stock: 1200MAX3098EBEEE Datasheet

Current PartRFQ

MAX3098EBEEE+

Analog Devices Inc./Maxim IntegratedIn Stock: 1813MAX3098EBEEE+ Datasheet

DirectRFQ

MAX3097EEEE+

Analog Devices Inc./Maxim IntegratedIn Stock: 2182MAX3097EEEE+ Datasheet

Parametric EquivalentRFQ

MAX3098EAEEE+

Analog Devices Inc./Maxim IntegratedIn Stock: 1040MAX3098EAEEE+ Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MAX3098EBEEE is determined by strict equivalence across the following critical parameters:

• Protocol Compatibility: RS422/RS485 receiver functionality
• Receiver Configuration: 0/3 (zero drivers, three receivers)
• Electrical Performance: 40 mV receiver hysteresis, 32 Mbps data rate
• Supply Voltage Range: 3V to 5.5V operation
• Temperature Range: -40°C to 85°C operating window
• Package Compatibility: 16-SSOP (16-QSOP) surface mount form factor
• Pin Configuration: Identical pinout and signal routing

All identified substitute parts maintain these parameters without deviation. Substitution is based on functional and electrical equivalence, not on product status or compliance improvements.

Parameter Comparison

Engineering Selection Recommendations

Direct Manufacturer Equivalent: MAX3098EBEEE+ is the direct successor to MAX3098EBEEE, maintaining identical electrical and mechanical specifications while transitioning to active product status and ROHS3 compliance. This part is the primary selection for new procurement and system redesigns.

Parametric Equivalents: MAX3097EEEE+ and MAX3098EAEEE+ are parametric equivalents that satisfy all functional and electrical requirements. Both parts are active products with ROHS3 compliance certification. Selection between these alternatives depends on inventory availability and supply chain considerations, as all three substitute parts are electrically and mechanically interchangeable with the original MAX3098EBEEE.

Compliance Consideration: All substitute parts achieve ROHS3 compliance, whereas the original MAX3098EBEEE is RoHS non-compliant. This represents a regulatory improvement for systems subject to RoHS directives.

Frequently Asked Questions (FAQ)

Q: Can MAX3098EBEEE+ be used as a direct replacement for MAX3098EBEEE?

A: Yes. MAX3098EBEEE+ is electrically and mechanically identical to MAX3098EBEEE across all specified parameters. The primary difference is product status (active vs. obsolete) and RoHS compliance certification.

Q: Are MAX3097EEEE+ and MAX3098EAEEE+ compatible with MAX3098EBEEE applications?

A: Yes. Both parts maintain identical receiver configuration (0/3), protocol support (RS422/RS485), hysteresis (40 mV), data rate (32 Mbps), supply voltage range (3V–5.5V), temperature range (-40°C to 85°C), and package form factor (16-SSOP). Pin-level compatibility is assured.

Q: What is the difference between the three substitute parts?

A: All three substitute parts (MAX3098EBEEE+, MAX3097EEEE+, MAX3098EAEEE+) are parametrically equivalent. Differences exist only in base product number designation and inventory availability. Electrical and mechanical specifications are identical.

Q: Does the packaging format differ between these parts?

A: No. All parts use 16-QSOP supplier device packaging in 16-SSOP form factor (0.154" width, 3.90mm). Tube packaging is specified for all substitute parts.

Q: Is the obsolete status of MAX3098EBEEE a concern for substitution?

A: The obsolete status indicates the original part is no longer manufactured. Substitution with active-status equivalents (MAX3098EBEEE+, MAX3097EEEE+, MAX3098EAEEE+) is necessary for ongoing procurement and system support.

Q: Are there any electrical performance differences between the substitute parts?

A: No. All substitute parts operate at identical receiver hysteresis (40 mV), data rate (32 Mbps), and supply voltage specifications. Functional performance is equivalent across all identified substitutes.