MAX3096CEE Equivalent & Substitute Parts

Part Overview

The MAX3096CEE is a 0/4 Receiver RS422/RS485 interface IC manufactured by Analog Devices Inc./Maxim Integrated in a 16-QSOP surface mount package. This component is classified as obsolete, which necessitates identification of equivalent and substitute parts for ongoing design support and procurement continuity. The MAX3096CEE operates within a 3V to 3.6V supply voltage range with a 10Mbps data rate capability and 45mV receiver hysteresis, making it suitable for low-voltage serial communication applications.

Substiute Parts

MAX3096CEE

Analog Devices Inc./Maxim IntegratedIn Stock: 2184MAX3096CEE Datasheet

Current PartRFQ

MAX3096CEE+

Analog Devices Inc./Maxim IntegratedIn Stock: 2479MAX3096CEE+ Datasheet

DirectRFQ

AM26LS32ACPW

Texas InstrumentsIn Stock: 3167AM26LS32ACPW Datasheet

MFR RecommendedRFQ

AM26LS32ACPWR

Texas InstrumentsIn Stock: 3861AM26LS32ACPWR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MAX3096CEE is determined by the following critical parameters:

• Protocol Compatibility: RS422/RS485 receiver functionality
• Receiver Configuration: 0/4 (zero drivers, four receivers)
• Receiver Hysteresis: 45mV nominal specification
• Data Rate: 10Mbps capability
• Supply Voltage Range: 3V to 3.6V operation
• Operating Temperature: 0°C to 70°C range
• Package Type: 16-pin surface mount configuration
• Mounting Compatibility: Surface mount technology

The substitute parts identified maintain functional equivalence within these parameters while accommodating variations in packaging format, product status, and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

MAX3096CEE+ (Direct Equivalent)

The MAX3096CEE+ is the primary substitute for the obsolete MAX3096CEE. Both parts share identical electrical specifications, including 3V to 3.6V supply voltage, 45mV receiver hysteresis, 10Mbps data rate, and 16-SSOP package configuration. The MAX3096CEE+ holds active product status and achieves ROHS3 compliance, addressing regulatory requirements while maintaining full functional compatibility. Packaging is available in Tube format.

AM26LS32ACPWR (Alternative Substitute)

The AM26LS32ACPWR from Texas Instruments provides functional receiver capability with 0/4 configuration and RS422/RS423 protocol support. This part operates at 4.75V to 5.25V supply voltage, which differs from the MAX3096CEE's 3V to 3.6V range. The AM26LS32ACPWR features 50mV receiver hysteresis and is housed in a 16-TSSOP package with 0.173" width, slightly larger than the MAX3096CEE's 16-SSOP package. This part holds active product status and ROHS3 compliance. Selection requires verification of supply voltage compatibility within the target application.

AM26LS32ACPW (Alternative Substitute)

The AM26LS32ACPW is functionally equivalent to the AM26LS32ACPWR with identical electrical specifications and package configuration. This part carries obsolete product status and is available in Tube packaging format. The same supply voltage considerations apply.

Frequently Asked Questions (FAQ)

Q: Can MAX3096CEE+ be used as a direct replacement for MAX3096CEE?

A: Yes. The MAX3096CEE+ maintains identical electrical specifications including supply voltage (3V to 3.6V), receiver hysteresis (45mV), data rate (10Mbps), and package configuration (16-SSOP). Both parts support RS422/RS485 protocols with 0/4 receiver configuration. The primary difference is product status: MAX3096CEE+ is active while MAX3096CEE is obsolete.

Q: What are the key differences between Maxim and Texas Instruments substitutes?

A: The Maxim MAX3096CEE+ operates at 3V to 3.6V supply voltage, while Texas Instruments AM26LS32ACPWR and AM26LS32ACPW require 4.75V to 5.25V. The Maxim part maintains 45mV receiver hysteresis; Texas Instruments parts specify 50mV. Package dimensions differ: Maxim uses 16-SSOP (0.154" width) versus Texas Instruments 16-TSSOP (0.173" width). Both support RS422 protocol; Texas Instruments parts support RS423 instead of RS485.

Q: Are there supply voltage compatibility concerns with Texas Instruments substitutes?

A: Yes. The AM26LS32ACPWR and AM26LS32ACPW operate at 4.75V to 5.25V, which is incompatible with the MAX3096CEE's 3V to 3.6V specification. These parts are suitable only for applications with 5V supply rails. The MAX3096CEE+ is the appropriate choice for 3.3V systems.

Q: Do package dimension differences affect PCB layout?

A: Yes. The MAX3096CEE uses 16-SSOP with 0.154" width, while AM26LS32ACPW and AM26LS32ACPWR use 16-TSSOP with 0.173" width. PCB footprints are not interchangeable. Layout modifications are required if substituting with Texas Instruments parts.

Q: What is the compliance status of available substitutes?

A: MAX3096CEE+ achieves ROHS3 compliance. Both AM26LS32ACPW and AM26LS32ACPWR achieve ROHS3 compliance. The original MAX3096CEE is RoHS non-compliant. All parts maintain MSL 1 (Unlimited) moisture sensitivity rating.

Q: Which substitute offers the best availability and compliance?

A: MAX3096CEE+ provides the optimal choice for direct replacement, offering active product status, ROHS3 compliance, and identical electrical specifications. AM26LS32ACPWR is the active Texas Instruments alternative but requires supply voltage and package layout verification.