MAX3095ESE+ Equivalent & Substitute Parts

Part Overview

The MAX3095ESE+ is an RS422/RS485 receiver interface IC manufactured by Analog Devices Inc./Maxim Integrated. This 0/4 receiver operates at 10 Mbps data rate with a 45 mV receiver hysteresis, housed in a 16-SOIC surface mount package. The part is Active status with ROHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are necessary when the primary part is unavailable, when alternative packaging formats are required, or when enhanced performance specifications are needed for specific application requirements.

Key Parameters

Parameter	MAX3095ESE+
Manufacturer	Analog Devices Inc./Maxim Integrated
Type	Receiver
Protocol	RS422, RS485
Number of Drivers/Receivers	0/4
Receiver Hysteresis	45 mV
Data Rate	10 Mbps
Voltage Supply	4.75V ~ 5.25V
Operating Temperature	-40°C ~ 85°C
Package / Case	16-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
MSL Rating	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the MAX3095ESE+ is determined by the following critical parameters:

Primary Compatibility Criteria:

Protocol support: RS422 and/or RS485
Receiver configuration: 0/4 (4 receivers, 0 drivers)
Package type: 16-SOIC surface mount
Supply voltage range: 4.75V to 5.25V (or compatible range)
Operating temperature range: -40°C to 85°C (or compatible range)
Receiver hysteresis: 45 mV (or lower for improved noise immunity)

Substitute Categories:

Direct Parametric Equivalents maintain identical electrical specifications and package format. MAX3093EESE+ qualifies as a parametric equivalent with matching receiver hysteresis, voltage supply, and temperature range.

Manufacturer Recommended Substitutes provide functional equivalence with allowable parameter variations. DS26C32ATM/NOPB (Texas Instruments) supports RS422/RS423 protocols with 60 mV hysteresis and 4.5V to 5.5V supply range. LTC1518 series parts (Analog Devices) offer enhanced 52 Mbps data rate capability with 25 mV hysteresis, maintaining full temperature and voltage compatibility. LTC1519 series parts provide identical performance to LTC1518 with alternative temperature or packaging options.

Packaging Format Variants include Tube and Tape & Reel (TR) options for the same base part numbers, accommodating different procurement and assembly workflows.

Parameter Comparison

Part Number	Manufacturer	Protocol	Receivers/Drivers	Hysteresis (mV)	Data Rate (Mbps)	Supply Voltage	Temp Range (°C)	Package	Packaging Format
MAX3095ESE+	Analog Devices/Maxim	RS422, RS485	0/4	45	10	4.75V ~ 5.25V	-40 ~ 85	16-SOIC	Tube
MAX3093EESE+	Analog Devices/Maxim	RS422, RS485	0/4	45	10	4.75V ~ 5.25V	-40 ~ 85	16-SOIC	Tube
DS26C32ATM/NOPB	Texas Instruments	RS422, RS423	0/4	60	—	4.5V ~ 5.5V	-40 ~ 85	16-SOIC	Tube
LTC1518CS#PBF	Analog Devices	RS422, RS485	0/4	25	52	4.75V ~ 5.25V	0 ~ 70	16-SOIC	Tube
LTC1518CS#TRPBF	Analog Devices	RS422, RS485	0/4	25	52	4.75V ~ 5.25V	0 ~ 70	16-SOIC	Tape & Reel
LTC1518IS#PBF	Analog Devices	RS422, RS485	0/4	25	52	4.75V ~ 5.25V	-40 ~ 85	16-SOIC	Tube
LTC1518IS#TRPBF	Analog Devices	RS422, RS485	0/4	25	52	4.75V ~ 5.25V	-40 ~ 85	16-SOIC	Tape & Reel
LTC1519CS#PBF	Analog Devices	RS422, RS485	0/4	25	52	4.75V ~ 5.25V	0 ~ 70	16-SOIC	Tube
LTC1519CS#TRPBF	Analog Devices	RS422, RS485	0/4	25	52	4.75V ~ 5.25V	0 ~ 70	16-SOIC	Tape & Reel
LTC1519IS#PBF	Analog Devices	RS422, RS485	0/4	25	52	4.75V ~ 5.25V	-40 ~ 85	16-SOIC	Tube

Engineering Selection Recommendations

All listed substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) ratings, ensuring compatibility with standard manufacturing processes and long-term storage requirements.

For direct replacement with identical specifications: MAX3093EESE+ provides exact parametric equivalence to MAX3095ESE+, maintaining 45 mV hysteresis, 10 Mbps data rate, and full -40°C to 85°C operating range.

For extended temperature range applications: LTC1518IS#PBF and LTC1518IS#TRPBF maintain the full -40°C to 85°C operating range while offering enhanced 52 Mbps data rate and improved 25 mV receiver hysteresis. These parts are suitable for industrial and automotive environments requiring extended temperature performance.

For commercial temperature range applications: LTC1518CS#PBF, LTC1518CS#TRPBF, LTC1519CS#PBF, LTC1519CS#TRPBF, and LTC1519IS#PBF operate within 0°C to 70°C range. These are appropriate for consumer and commercial equipment where extended low-temperature operation is not required.

For alternative manufacturer requirement: DS26C32ATM/NOPB (Texas Instruments) provides cross-manufacturer substitution with RS422/RS423 protocol support, 60 mV hysteresis, and extended supply voltage range (4.5V to 5.5V), maintaining full -40°C to 85°C temperature operation.

For packaging format flexibility: Tube packaging (standard format) and Tape & Reel (TR) packaging are available across the LTC1518 and LTC1519 series, accommodating both manual assembly and automated pick-and-place workflows.

Frequently Asked Questions (FAQ)

Q: Can MAX3093EESE+ be used as a direct replacement for MAX3095ESE+?

A: Yes. MAX3093EESE+ is a parametric equivalent with identical receiver hysteresis (45 mV), data rate (10 Mbps), supply voltage range (4.75V to 5.25V), and operating temperature range (-40°C to 85°C). Both parts use 16-SOIC surface mount packaging.

Q: What is the difference between LTC1518 and LTC1519 series parts?

A: LTC1518 and LTC1519 series maintain identical electrical specifications (25 mV hysteresis, 52 Mbps data rate, RS422/RS485 protocol support). The primary difference is the base part number designation. Both are available in commercial (0°C to 70°C) and industrial (-40°C to 85°C) temperature grades with Tube or Tape & Reel packaging options.

Q: Why do LTC1518 and LTC1519 parts have lower receiver hysteresis (25 mV) compared to MAX3095ESE+ (45 mV)?

A: Lower receiver hysteresis improves noise immunity and signal detection sensitivity. The 25 mV specification in LTC1518/LTC1519 parts represents enhanced performance compared to the 45 mV specification in MAX3095ESE+. This is a beneficial parameter variation for noise-sensitive applications.

Q: Can DS26C32ATM/NOPB replace MAX3095ESE+ in all applications?

A: DS26C32ATM/NOPB supports RS422 and RS423 protocols (versus RS422/RS485 in MAX3095ESE+) with 60 mV receiver hysteresis and 4.5V to 5.5V supply range. It maintains 16-SOIC packaging and -40°C to 85°C temperature operation. Substitution is valid for applications using RS422 protocol; RS485-specific applications require confirmation of protocol compatibility.

Q: What is the difference between Tube and Tape & Reel (TR) packaging formats?

A: Tube packaging is standard format for manual assembly and small-quantity procurement. Tape & Reel (TR) packaging is optimized for automated pick-and-place assembly equipment and high-volume production. Both formats contain identical parts; the difference is in delivery and handling method.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with standard manufacturing processes and environmental regulations.

Q: Which substitute part should I select for industrial applications requiring extended temperature operation?

A: LTC1518IS#PBF or LTC1518IS#TRPBF are recommended for industrial applications. Both maintain the full -40°C to 85°C operating range while providing enhanced 52 Mbps data rate and improved 25 mV receiver hysteresis. Select Tube format for manual assembly or Tape & Reel format for automated assembly.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message