MAX3095EEE Equivalent & Substitute Parts

Part Overview

The MAX3095EEE is a 0/4 Receiver RS422/RS485 interface IC manufactured by Analog Devices Inc./Maxim Integrated in a 16-QSOP surface mount package. This component is classified as obsolete, which necessitates identification of active equivalent parts for ongoing design requirements and procurement planning. The receiver hysteresis of 45 mV and 10 Mbps data rate support standard RS422/RS485 communication protocols in industrial and commercial applications.

Substiute Parts

MAX3095EEE

Analog Devices Inc./Maxim IntegratedIn Stock: 2144MAX3095EEE Datasheet

Current PartRFQ

MAX3095EEE+

Analog Devices Inc./Maxim IntegratedIn Stock: 20374MAX3095EEE+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MAX3095EEE is determined by strict equivalence across the following critical parameters:

• Protocol support: RS422/RS485
• Receiver configuration: 0/4 (4 receivers, 0 drivers)
• Receiver hysteresis: 45 mV
• Data rate: 10 Mbps
• Supply voltage range: 4.75V ~ 5.25V
• Operating temperature range: -40°C ~ 85°C
• Package type: 16-QSOP (16-SSOP, 0.154" width, 3.90mm)
• Mounting type: Surface Mount

The MAX3095EEE+ shares identical electrical and mechanical specifications with the main part, differing only in product status (Active vs. Obsolete) and compliance certification (ROHS3 Compliant vs. RoHS non-compliant).

Parameter Comparison

Engineering Selection Recommendations

The MAX3095EEE+ is the direct equivalent for the obsolete MAX3095EEE. Both parts maintain identical electrical performance and mechanical compatibility. The primary distinction is product lifecycle status: MAX3095EEE is obsolete with limited availability, while MAX3095EEE+ is active with established supply chains.

For new designs or component replenishment, MAX3095EEE+ is the appropriate selection due to active product status and ROHS3 compliance certification. Existing designs using MAX3095EEE can transition to MAX3095EEE+ without circuit modification, as all functional parameters remain equivalent.

Frequently Asked Questions (FAQ)

Q: Can MAX3095EEE+ be used as a direct replacement for MAX3095EEE?

A: Yes. Both parts are electrically and mechanically identical. The MAX3095EEE+ is the active production equivalent with ROHS3 compliance.

Q: What is the difference between MAX3095EEE and MAX3095EEE+?

A: The parts differ in product status (Obsolete vs. Active) and RoHS certification (non-compliant vs. ROHS3 Compliant). All electrical specifications, receiver configuration, data rate, supply voltage, operating temperature range, and package type are identical.

Q: Are there any pin compatibility concerns when substituting MAX3095EEE with MAX3095EEE+?

A: No. Both parts use the 16-QSOP package with identical pinout and mechanical dimensions (0.154" width, 3.90mm).

Q: Does the MAX3095EEE+ support the same RS422/RS485 protocols?

A: Yes. Both parts support RS422 and RS485 protocols with identical receiver hysteresis (45 mV) and data rate (10 Mbps).

Q: What is the supply voltage requirement for MAX3095EEE+?

A: The supply voltage range is 4.75V to 5.25V, identical to the MAX3095EEE.

Q: Is the MAX3095EEE+ suitable for industrial temperature applications?

A: Yes. The operating temperature range is -40°C to 85°C, supporting industrial and commercial environments.