MAX3095CEE Equivalent & Substitute Parts

Part Overview

The MAX3095CEE is a 0/4 Receiver RS422/RS485 interface IC manufactured by Analog Devices Inc./Maxim Integrated in a 16-QSOP surface mount package. This component is classified as obsolete, which necessitates identification of functionally equivalent alternatives for new designs and ongoing production requirements. The receiver operates at 10 Mbps data rate with 45 mV hysteresis and requires a 4.75V to 5.25V supply voltage across an operating temperature range of 0°C to 70°C.

Substiute Parts

MAX3095CEE

Analog Devices Inc./Maxim IntegratedIn Stock: 831MAX3095CEE Datasheet

Current PartRFQ

MAX3095CEE+

Analog Devices Inc./Maxim IntegratedIn Stock: 2363MAX3095CEE+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MAX3095CEE is determined by strict equivalence across the following critical parameters:

• Protocol support: RS422 and RS485
• Receiver configuration: 0/4 (4 receivers, 0 drivers)
• Receiver hysteresis: 45 mV
• Data rate: 10 Mbps
• Supply voltage range: 4.75V ~ 5.25V
• Operating temperature range: 0°C ~ 70°C
• Package type: 16-QSOP surface mount
• Pin-for-pin compatibility: 16-pin SSOP footprint

The MAX3095CEE+ meets all electrical and mechanical parameters required for direct substitution. The primary distinction is product status and compliance certification, which affects availability and regulatory requirements for new applications.

Parameter Comparison

Engineering Selection Recommendations

The MAX3095CEE+ is the direct equivalent substitute for the MAX3095CEE. Both components share identical electrical specifications and package footprints, ensuring pin-for-pin compatibility and functional interchangeability.

The MAX3095CEE+ offers two significant advantages for new designs and production:

1. Active product status ensures long-term availability and manufacturer support
2. ROHS3 compliance satisfies current regulatory requirements for electronic components in most markets

The MAX3095CEE remains suitable for legacy system maintenance and repair applications where existing inventory is available. Selection between the two should be based on project timeline, regulatory compliance requirements, and supply chain considerations.

Frequently Asked Questions (FAQ)

Q: Can MAX3095CEE+ be used as a direct replacement for MAX3095CEE?

A: Yes. Both components are electrically and mechanically identical. The MAX3095CEE+ is pin-for-pin compatible and requires no circuit modifications.

Q: What is the difference between MAX3095CEE and MAX3095CEE+?

A: The primary differences are product status and RoHS compliance. The MAX3095CEE is obsolete and RoHS non-compliant, while the MAX3095CEE+ is active and ROHS3 compliant. All electrical and mechanical parameters are identical.

Q: Are there any package differences between these parts?

A: Both components use the 16-QSOP surface mount package with identical 16-SSOP (0.154", 3.90mm Width) footprints. The MAX3095CEE+ is supplied in tube packaging, while the MAX3095CEE packaging is not specified.

Q: What protocols does the MAX3095CEE support?

A: The MAX3095CEE supports both RS422 and RS485 serial communication protocols with a 10 Mbps data rate.

Q: What is the operating temperature range?

A: The operating temperature range is 0°C to 70°C for both the MAX3095CEE and MAX3095CEE+.

Q: What supply voltage is required?

A: Both components require a supply voltage between 4.75V and 5.25V.