MAX3093ECSE+ Equivalent & Substitute Parts

Part Overview

The MAX3093ECSE+ is an RS422/RS485 receiver interface IC manufactured by Analog Devices Inc./Maxim Integrated. This 0/4 receiver operates as a surface-mount component in a 16-SOIC package and is classified as Active product status. The device is designed for industrial communication applications requiring reliable serial data reception over differential signal lines. Substitute parts are necessary when the primary part is unavailable, when alternative packaging formats are required for manufacturing processes, or when enhanced performance specifications are needed for specific application requirements.

Key Parameters

Parameter	Value
Manufacturer Part Number	MAX3093ECSE+
Manufacturer	Analog Devices Inc./Maxim Integrated
Category	Interface
Type	Receiver
Protocol	RS422, RS485
Number of Drivers/Receivers	0/4
Receiver Hysteresis	45 mV
Data Rate	10 Mbps
Voltage - Supply	4.75V ~ 5.25V
Operating Temperature	0°C ~ 70°C
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154", 3.90mm Width)
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Product Status	Active

Substitute Part Grouping Explanation

Substitution eligibility for the MAX3093ECSE+ is determined by the following critical parameters:

Primary Substitution Criteria:

Protocol support: RS422 and/or RS485 compatibility
Receiver configuration: 0/4 (zero drivers, four receivers)
Package type: 16-SOIC form factor
Supply voltage range: 4.75V ~ 5.25V
Operating temperature range: minimum 0°C ~ 70°C
Mounting type: Surface Mount
RoHS compliance: ROHS3 Compliant

Secondary Compatibility Factors:

Receiver hysteresis: 45 mV (primary specification)
Data rate: 10 Mbps (primary specification)
Moisture sensitivity level: 1 (Unlimited)

Substitute parts are grouped into two categories: parametric equivalents that match all critical specifications, and manufacturer-recommended alternatives that maintain functional compatibility within the RS422/RS485 receiver interface category while potentially offering enhanced performance characteristics or alternative packaging options.

Parameter Comparison

Part Number	Manufacturer	Protocol	Receiver Hysteresis	Data Rate	Operating Temperature	Packaging	Inventory
MAX3093ECSE+	Analog Devices Inc./Maxim Integrated	RS422, RS485	45 mV	10 Mbps	0°C ~ 70°C	Tube	2104 Pcs
MAX3095CSE+	Analog Devices Inc./Maxim Integrated	RS422, RS485	45 mV	10 Mbps	0°C ~ 70°C	Tube	2100 Pcs
DS3486M/NOPB	Texas Instruments	RS422, RS423	140 mV	—	0°C ~ 70°C	Tube	6027 Pcs
LTC1518CS#PBF	Analog Devices Inc.	RS422, RS485	25 mV	52 Mbps	0°C ~ 70°C	Tube	2200 Pcs
LTC1518CS#TRPBF	Analog Devices Inc.	RS422, RS485	25 mV	52 Mbps	0°C ~ 70°C	Tape & Reel (TR)	2100 Pcs
LTC1518IS#PBF	Analog Devices Inc.	RS422, RS485	25 mV	52 Mbps	-40°C ~ 85°C	Tube	1099 Pcs
LTC1518IS#TRPBF	Analog Devices Inc.	RS422, RS485	25 mV	52 Mbps	-40°C ~ 85°C	Tape & Reel (TR)	3952 Pcs
LTC1519CS#PBF	Analog Devices Inc.	RS422, RS485	25 mV	52 Mbps	0°C ~ 70°C	Tube	3900 Pcs
LTC1519CS#TRPBF	Analog Devices Inc.	RS422, RS485	25 mV	52 Mbps	0°C ~ 70°C	Tape & Reel (TR)	2200 Pcs
LTC1519IS#PBF	Analog Devices Inc.	RS422, RS485	25 mV	52 Mbps	-40°C ~ 85°C	Tube	1218 Pcs

Engineering Selection Recommendations

Parametric Equivalent: MAX3095CSE+ is a direct parametric equivalent to MAX3093ECSE+, matching all critical electrical and mechanical specifications including receiver hysteresis, data rate, operating temperature range, and package configuration. Both parts maintain ROHS3 compliance and identical supply voltage requirements. Selection between these parts depends solely on inventory availability and manufacturing scheduling.

Manufacturer-Recommended Alternatives: The LTC1518 and LTC1519 series from Analog Devices Inc. are manufacturer-recommended substitutes that maintain RS422/RS485 protocol compatibility and identical supply voltage specifications. These alternatives offer enhanced data rate performance (52 Mbps versus 10 Mbps) and lower receiver hysteresis (25 mV versus 45 mV), providing improved signal integrity margins. The LTC1518IS#TRPBF and LTC1519IS#TRPBF variants extend the operating temperature range to -40°C ~ 85°C, suitable for industrial and automotive applications requiring wider temperature performance.

The DS3486M/NOPB from Texas Instruments is a cross-manufacturer alternative supporting RS422 and RS423 protocols. This part maintains identical supply voltage and operating temperature specifications but features higher receiver hysteresis (140 mV) and does not specify data rate performance.

Packaging Considerations: Tube packaging (standard) is suitable for manual assembly and low-volume production. Tape & Reel (TR) packaging is required for automated pick-and-place assembly processes and high-volume manufacturing operations.

Compliance Status: All listed substitute parts maintain ROHS3 compliance, MSL Level 1 (Unlimited), and REACH Unaffected status, ensuring regulatory compatibility with the original MAX3093ECSE+ specification.

Frequently Asked Questions (FAQ)

Q: Can MAX3095CSE+ directly replace MAX3093ECSE+ in production? A: Yes. MAX3095CSE+ is a parametric equivalent matching all critical specifications including receiver hysteresis (45 mV), data rate (10 Mbps), operating temperature (0°C ~ 70°C), and 16-SOIC package configuration. No circuit redesign is required.

Q: What is the difference between LTC1518 and LTC1519 series? A: Both series maintain identical electrical specifications (25 mV hysteresis, 52 Mbps data rate, RS422/RS485 support). The primary difference is the temperature grade designation: "C" suffix indicates 0°C ~ 70°C operation, while "I" suffix indicates -40°C ~ 85°C operation. Select based on application temperature requirements.

Q: Why do LTC1518 and LTC1519 parts have higher data rates than MAX3093ECSE+? A: The LTC1518 and LTC1519 series are enhanced performance alternatives offering 52 Mbps data rate capability compared to the MAX3093ECSE+ specification of 10 Mbps. These parts are backward compatible with lower-speed applications and provide additional performance margin for future design requirements.

Q: What packaging format should be selected for automated assembly? A: Tape & Reel (TR) packaging is required for automated pick-and-place assembly equipment. Tube packaging is suitable for manual assembly and low-volume production. Both packaging formats contain identical die and electrical specifications.

Q: Is DS3486M/NOPB compatible with RS485 applications? A: DS3486M/NOPB supports RS422 and RS423 protocols. While it maintains identical supply voltage (4.75V ~ 5.25V) and operating temperature (0°C ~ 70°C) specifications, RS423 protocol differs from RS485. Verify protocol compatibility with system requirements before selection.

Q: Do all substitute parts maintain the same pin configuration? A: All listed parts use 16-SOIC package format with identical pin count. Verify pinout compatibility in device datasheets before PCB layout finalization, as pin assignment may differ between manufacturers.

Q: What is receiver hysteresis and why does it vary among substitutes? A: Receiver hysteresis defines the voltage difference between rising and falling threshold levels, affecting noise immunity and signal integrity. MAX3093ECSE+ specifies 45 mV hysteresis, while LTC1518/LTC1519 alternatives provide 25 mV hysteresis. Lower hysteresis values provide tighter threshold control suitable for high-speed applications. Higher hysteresis values provide greater noise immunity in noisy environments.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message