MAX280CWE+ Equivalent & Substitute Parts Reference

Part Overview

The MAX280CWE+ is a Butterworth, Low Pass Switched Capacitor Filter IC manufactured by Analog Devices Inc./Maxim Integrated. This 5th Order filter operates at a 20kHz cutoff frequency and is housed in a 16-SOIC surface mount package. The device is currently in Active product status with full inventory availability (1143 Pcs New Original In Stock). Alternative components are necessary when addressing supply chain constraints, regional availability requirements, or specific application-driven packaging preferences while maintaining identical electrical and mechanical specifications.

Substiute Parts

MAX280CWE+

Analog Devices Inc./Maxim IntegratedIn Stock: 1206MAX280CWE+ Datasheet

Current PartRFQ

MAX280CWE+

Analog Devices Inc./Maxim IntegratedIn Stock: 1206MAX280CWE+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MAX280CWE+ is determined by strict equivalence across the following critical parameters:

• Filter Type: Butterworth, Low Pass Switched Capacitor topology
• Filter Order: 5th Order configuration
• Frequency - Cutoff or Center: 20kHz operational specification
• Number of Filters: Single filter per package
• Voltage - Supply: 4.75V ~ 16V, ±2.375V ~ 8V dual supply range
• Mounting Type: Surface Mount technology
• Package / Case: 16-SOIC (0.295", 7.50mm Width) form factor
• Product Status: Active manufacturing status

Only components meeting all specified parameters qualify as direct substitutes. The MAX280CWE+ represents the current direct equivalent within the Analog Devices Inc./Maxim Integrated product line for this filter specification.

Parameter Comparison

Engineering Selection Recommendations

The MAX280CWE+ maintains Active product status with established manufacturing continuity and full regulatory compliance. The device carries ROHS3 certification and REACH Unaffected designation, confirming compliance with current environmental and hazardous substance directives. MSL Level 1 (Unlimited) classification indicates minimal moisture sensitivity, reducing handling and storage constraints during assembly operations. Selection of this component is supported by its established supply chain presence and documented compliance certifications suitable for production environments requiring regulatory traceability.

Frequently Asked Questions (FAQ)

Q: What defines a valid substitute for the MAX280CWE+? A: A valid substitute must match all electrical and mechanical parameters: Butterworth, Low Pass Switched Capacitor filter topology, 5th Order configuration, 20kHz cutoff frequency, single filter per package, 4.75V ~ 16V / ±2.375V ~ 8V supply voltage range, Surface Mount technology, and 16-SOIC (0.295", 7.50mm Width) package form factor.

Q: Is the MAX280CWE+ suitable for new design implementations? A: Yes. The device maintains Active product status with continuous manufacturing support from Analog Devices Inc./Maxim Integrated, confirming suitability for new production designs.

Q: What are the package handling requirements for the MAX280CWE+? A: The MSL Level 1 (Unlimited) classification indicates this component has no moisture sensitivity restrictions. Standard surface mount assembly procedures apply without specialized moisture control requirements.

Q: Are there compliance considerations for this component? A: The MAX280CWE+ is ROHS3 Compliant and REACH Unaffected, meeting current environmental and hazardous substance regulations applicable to electronic component manufacturing and distribution.

Q: What supply voltage configurations does the MAX280CWE+ support? A: The device operates across dual supply ranges: 4.75V to 16V single supply, or ±2.375V to ±8V dual supply configuration, providing flexibility for various circuit topologies.