MAX271ENG Equivalent & Substitute Parts

Part Overview

The MAX271ENG is a continuous low pass filter IC manufactured by Analog Devices Inc./Maxim Integrated. This 2nd order low pass filter operates at a 25kHz cutoff frequency and integrates two filter channels in a single 24-DIP package. The device is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and component procurement.

Substiute Parts

MAX271ENG

Analog Devices Inc./Maxim IntegratedIn Stock: 1144MAX271ENG Datasheet

Current PartRFQ

MAX271ENG+

Analog Devices Inc./Maxim IntegratedIn Stock: 1214MAX271ENG+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the MAX271ENG is determined by strict equivalence across the following critical parameters:

• Filter Type: Continuous Low Pass
• Frequency - Cutoff or Center: 25kHz
• Number of Filters: 2
• Filter Order: 2nd
• Voltage - Supply: 4.74V ~ 16V, ±2.37V ~ 8V
• Package / Case: 24-DIP (0.300", 7.62mm)
• Mounting Type: Through Hole

The MAX271ENG+ meets all electrical and mechanical substitution criteria, maintaining identical filter specifications, supply voltage ranges, and physical packaging. Both devices are manufactured by Analog Devices Inc./Maxim Integrated and share the same base product number (MAX271).

Parameter Comparison

Engineering Selection Recommendations

The MAX271ENG+ is a direct electrical and mechanical equivalent to the MAX271ENG. Both devices are obsolete products from Analog Devices Inc./Maxim Integrated with identical filter specifications and packaging.

The primary distinction between these parts is regulatory compliance: the MAX271ENG+ carries ROHS3 compliance, whereas the MAX271ENG is RoHS non-compliant. For applications subject to RoHS directives or environmental regulations, the MAX271ENG+ is the appropriate selection. Both devices maintain identical moisture sensitivity levels and REACH status.

Frequently Asked Questions (FAQ)

Q: Can MAX271ENG+ replace MAX271ENG in existing designs?

A: Yes. The MAX271ENG+ is electrically and mechanically equivalent. Both devices provide identical 2nd order continuous low pass filtering at 25kHz with two filter channels, operate across the same supply voltage range (4.74V ~ 16V, ±2.37V ~ 8V), and use the same 24-DIP through-hole package.

Q: What is the difference between MAX271ENG and MAX271ENG+?

A: The MAX271ENG+ is ROHS3 compliant, while the MAX271ENG is RoHS non-compliant. All electrical specifications and physical packaging are identical.

Q: Are both parts still available?

A: Both MAX271ENG and MAX271ENG+ are classified as obsolete products. Inventory availability should be confirmed with authorized distributors.

Q: Does the package type differ between these parts?

A: No. Both parts use the 24-DIP (0.300", 7.62mm) through-hole package with identical pin configurations and mechanical dimensions.

Q: What supply voltages do these filters support?

A: Both devices support dual supply configurations: 4.74V ~ 16V (single supply) or ±2.37V ~ 8V (dual supply).