MAX262BENG+ Equivalent & Substitute Parts

Part Overview

The MAX262BENG+ is a universal switched capacitor filter IC manufactured by Analog Devices Inc./Maxim Integrated. This 2nd order, dual-filter device operates at a cutoff frequency of 140kHz and supports dual supply configurations (4.74V ~ 12.6V or ±2.37V ~ 6.3V). The component is actively produced, ROHS3 compliant, and widely used in signal conditioning and filtering applications requiring precision analog filtering in compact form factors. Alternative components are identified based on matching electrical specifications, package compatibility, and supply voltage requirements.

Substiute Parts

MAX262BENG+

Analog Devices Inc./Maxim IntegratedIn Stock: 749MAX262BENG+ Datasheet

Current PartRFQ

MAX262BENG+

Analog Devices Inc./Maxim IntegratedIn Stock: 749MAX262BENG+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the MAX262BENG+ is determined by the following critical parameters:

• Filter Architecture: Universal switched capacitor topology
• Frequency Specification: 140kHz cutoff/center frequency
• Dual Filter Configuration: 2nd order, dual-filter design
• Supply Voltage Compatibility: Dual supply (±2.37V ~ 6.3V) or single supply (4.74V ~ 12.6V)
• Package Compatibility: 24-DIP through-hole form factor
• Electrical Performance: 2nd order filter response characteristics

The MAX262BENG+ serves as both the primary component and its direct equivalent. No alternative part numbers with differing specifications are provided in the substitute list.

Parameter Comparison

Engineering Selection Recommendations

The MAX262BENG+ is an active product with full ROHS3 compliance and REACH unaffected status, making it suitable for current production applications. The component carries MSL Level 1 rating, indicating unlimited shelf life without moisture sensitivity constraints. Selection of this part is appropriate for applications requiring universal switched capacitor filtering at 140kHz with dual supply voltage flexibility. The 24-DIP through-hole package supports both prototype and production environments with standard PCB assembly processes.

Frequently Asked Questions (FAQ)

Q: What defines a valid substitute for the MAX262BENG+? A: A valid substitute must maintain identical specifications across filter type (universal switched capacitor), frequency (140kHz), filter order (2nd), dual-filter configuration, supply voltage range (4.74V ~ 12.6V or ±2.37V ~ 6.3V), and 24-DIP package format.

Q: Can the MAX262BENG+ be used in both single and dual supply configurations? A: Yes. The component supports single supply operation (4.74V ~ 12.6V) and dual supply operation (±2.37V ~ 6.3V), providing flexibility in circuit design.

Q: Is the MAX262BENG+ suitable for new designs? A: Yes. The component maintains active product status with full ROHS3 compliance and REACH unaffected designation, making it appropriate for current production applications.

Q: What is the significance of the 24-DIP package format? A: The 24-DIP (0.300", 7.62mm) package is a through-hole form factor compatible with standard PCB assembly equipment and breadboard prototyping, supporting both development and production environments.

Q: Does moisture sensitivity affect storage or handling of this component? A: No. The MAX262BENG+ carries MSL Level 1 rating, which indicates unlimited shelf life without moisture sensitivity constraints or special storage requirements.