MAX206ECAG+ Equivalent & Substitute Parts

Part Overview

The MAX206ECAG+ is a full-duplex RS232 transceiver manufactured by Analog Devices Inc./Maxim Integrated, configured with 4 drivers and 3 receivers in a 24-SSOP surface mount package. This interface IC operates across industrial and commercial temperature ranges and maintains active product status with full RoHS3 compliance. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and regulatory compliance can be maintained across the specified parameter set.

Substiute Parts

MAX206ECAG+

Analog Devices Inc./Maxim IntegratedIn Stock: 1083MAX206ECAG+ Datasheet

Current PartRFQ

MAX206CAG+

Analog Devices Inc./Maxim IntegratedIn Stock: 859MAX206CAG+ Datasheet

Parametric EquivalentRFQ

MAX206ECAG+

Analog Devices Inc./Maxim IntegratedIn Stock: 1083MAX206ECAG+ Datasheet

Parametric EquivalentRFQ

ADM206ARSZ

Analog Devices Inc.In Stock: 220947ADM206ARSZ Datasheet

MFR RecommendedRFQ

ADM206ARSZ-REEL

Analog Devices Inc.In Stock: 740ADM206ARSZ-REEL Datasheet

MFR RecommendedRFQ

HIN206EIAZ

Renesas Electronics CorporationIn Stock: 1461HIN206EIAZ Datasheet

MFR RecommendedRFQ

HIN206EIAZ-T

Renesas Electronics CorporationIn Stock: 6494HIN206EIAZ-T Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MAX206ECAG+ is determined by strict equivalence across the following critical parameters:

• Protocol and Configuration: RS232 full-duplex transceiver with 4 drivers and 3 receivers
• Package Compatibility: 24-SSOP surface mount package with 5.30mm width
• Supply Voltage: 4.5V to 5.5V operating range
• Regulatory Compliance: ROHS3 compliance and REACH unaffected status
• Electrical Performance: Receiver hysteresis and data rate specifications

Substitute parts are grouped into two categories:

Parametric Equivalents maintain identical electrical specifications including receiver hysteresis (500 mV) and data rate (120 Kbps), with operating temperature limited to 0°C ~ 70°C. These parts are direct functional replacements.

Manufacturer Recommended Alternatives offer extended operating temperature ranges (-40°C ~ 85°C) and may include variations in receiver hysteresis (650 mV) or data rate specifications. These parts maintain full RS232 protocol compliance and package compatibility but operate across broader environmental conditions.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Identical Operating Conditions)

The MAX206CAG+ provides parametric equivalence to the MAX206ECAG+ with identical electrical specifications and operating temperature range. Both parts maintain ROHS3 compliance, MSL Level 1 rating, and Tube packaging. Selection between these two depends on inventory availability and procurement lead times.

For Extended Temperature Range Applications

The ADM206ARSZ and ADM206ARSZ-REEL variants from Analog Devices Inc. extend the operating temperature range to -40°C ~ 85°C, accommodating industrial and automotive environments. The ADM206ARSZ-REEL variant provides Tape & Reel packaging for high-volume automated assembly. Both maintain 4.5V ~ 5.5V supply voltage compatibility and ROHS3 compliance. The receiver hysteresis specification increases to 650 mV, which remains within RS232 protocol tolerances.

For Enhanced Data Rate Performance

The HIN206EIAZ and HIN206EIAZ-T from Renesas Electronics Corporation support 230 Kbps data rates, approximately double the MAX206ECAG+ specification. These parts maintain 500 mV receiver hysteresis and -40°C ~ 85°C operating temperature range. MSL Level 3 (168 Hours) rating applies to these Renesas devices, requiring appropriate moisture control during storage and assembly.

All substitute parts maintain full RS232 protocol compliance, 24-SSOP package compatibility, and REACH unaffected regulatory status.

Frequently Asked Questions (FAQ)

Q: Can MAX206CAG+ be used as a direct replacement for MAX206ECAG+?

A: Yes. The MAX206CAG+ is a parametric equivalent with identical electrical specifications, operating temperature range (0°C ~ 70°C), receiver hysteresis (500 mV), and data rate (120 Kbps). Both parts are manufactured by Analog Devices Inc./Maxim Integrated in 24-SSOP packaging with ROHS3 compliance.

Q: What is the primary difference between MAX206ECAG+ and ADM206ARSZ?

A: The ADM206ARSZ extends the operating temperature range to -40°C ~ 85°C and increases receiver hysteresis to 650 mV. The MAX206ECAG+ operates from 0°C ~ 70°C with 500 mV hysteresis. Both maintain 4.5V ~ 5.5V supply voltage and 24-SSOP package compatibility. Selection depends on environmental operating conditions.

Q: Why do HIN206EIAZ parts have higher data rate specifications?

A: The HIN206EIAZ and HIN206EIAZ-T from Renesas Electronics Corporation are specified for 230 Kbps data rates compared to the MAX206ECAG+ 120 Kbps specification. Both maintain RS232 protocol compliance and 24-SSOP package compatibility. The higher data rate capability does not affect backward compatibility with systems designed for 120 Kbps operation.

Q: What packaging differences exist between substitute parts?

A: MAX206ECAG+, MAX206CAG+, ADM206ARSZ, and HIN206EIAZ are supplied in Tube packaging. ADM206ARSZ-REEL is supplied in Tape & Reel (TR) format for automated assembly. HIN206EIAZ-T packaging type is not specified in available data. Packaging selection affects assembly process compatibility and bulk quantity handling.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance and REACH unaffected regulatory status, consistent with the MAX206ECAG+ baseline.

Q: What is the significance of MSL Level differences?

A: MAX206ECAG+, MAX206CAG+, ADM206ARSZ, and ADM206ARSZ-REEL carry MSL Level 1 (Unlimited) rating, requiring no special moisture control. HIN206EIAZ and HIN206EIAZ-T carry MSL Level 3 (168 Hours) rating, requiring moisture control measures during storage and assembly to prevent solder joint degradation.