MAX204CPE+ Equivalent & Substitute Parts Reference

Part Overview

The MAX204CPE+ is an RS232 interface driver IC manufactured by Analog Devices Inc./Maxim Integrated. This 4/0 driver operates at data rates up to 120 Kbps and is housed in a 16-pin DIP package for through-hole mounting applications. The device is currently in active production status and maintains full ROHS3 compliance with unlimited moisture sensitivity rating (MSL 1). The MAX204CPE+ serves as a critical interface component for serial communication systems requiring RS232 protocol support with 4 drivers and 0 receivers configuration.

Substiute Parts

MAX204CPE+

Analog Devices Inc./Maxim IntegratedIn Stock: 975MAX204CPE+ Datasheet

Current PartRFQ

MAX204CPE+

Analog Devices Inc./Maxim IntegratedIn Stock: 975MAX204CPE+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the MAX204CPE+ is determined by strict alignment across the following critical parameters:

• Protocol Compatibility: RS232 interface standard
• Driver/Receiver Configuration: 4 drivers and 0 receivers
• Data Rate Capability: Minimum 120 Kbps support
• Supply Voltage Range: 4.5V to 5.5V operation
• Operating Temperature Range: 0°C to 70°C minimum coverage
• Package Format: 16-pin DIP through-hole mounting
• Compliance Standards: ROHS3 compliance and EAR99 classification

Only components matching all these parameters across electrical specifications, mechanical packaging, and regulatory compliance are considered direct substitutes.

Parameter Comparison

Engineering Selection Recommendations

Component selection for RS232 interface applications must prioritize electrical and mechanical parameter alignment. The MAX204CPE+ is an active production component with full ROHS3 compliance and EAR99 classification, ensuring regulatory compliance for commercial and industrial applications. When evaluating substitute components, confirm that all parameters listed in the Parameter Comparison table match exactly. Active product status indicates ongoing manufacturer support and supply chain availability. ROHS3 compliance is mandatory for applications subject to environmental regulations in target markets.

Frequently Asked Questions (FAQ)

Q: What defines a valid substitute for the MAX204CPE+? A: A valid substitute must match all electrical parameters (RS232 protocol, 4/0 driver/receiver configuration, 120 Kbps data rate, 4.5V–5.5V supply voltage, 0°C–70°C operating temperature), mechanical specifications (16-pin DIP through-hole package), and compliance certifications (ROHS3 compliance).

Q: Can I use a different package type as a substitute? A: No. The 16-DIP through-hole package is a critical mechanical specification. Different package types (such as SOIC or QFP variants) are not interchangeable without circuit board redesign and are not considered substitutes.

Q: Does the MAX204CPE+ support higher data rates than 120 Kbps? A: The specified data rate for this component is 120 Kbps. This is the rated performance parameter for this particular device variant.

Q: Is the MAX204CPE+ suitable for new designs? A: Yes. The component maintains active production status, indicating current manufacturer support and availability for new design implementations.

Q: What is the significance of ROHS3 compliance? A: ROHS3 compliance indicates the component meets Restriction of Hazardous Substances regulations, making it suitable for applications in markets with environmental compliance requirements.

Q: Are there any inventory considerations for this component? A: The MAX204CPE+ is currently available with 942 pieces in stock as new original inventory, indicating adequate supply for immediate procurement needs.